|
User manual for ACTi V32 16-Channel Video Encoder V32
- Manufacturer: ACTi
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders
- Safety instructions
- Startup and operation of the video encoders & decoders
- Tips for setting up your ACTi
- Settings and expert assistance
- Contact ACTi service
- Troubleshooting
- Warranty information
Click to enlarge image
|
We recommend checking out our discussion threads on the ACTi V32 16-Channel Video Encoder V32,
which address similar problems with connecting and setting up Video Encoders & Decoders ACTi.
|
User manual for the ACTi V32 16-Channel Video Encoder V32
The user manual for the ACTi V32 16-Channel Video Encoder V32 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
Bring your analog camera setup into the digital IP-based age with this V32 16-Channel Video Encoder from ACTi. Equipped with 16 BNC inputs and the ability to compress footage using either the H.264 or MJPEG formats, this 1U 19" rack-mountable encoder is an exceptionally useful tool for integration of your analog cameras. The encoder will even support high 960H 960 x 480 resolutions at up to 30 fps, as well as full D1, both options in NTSC or PAL standards. Simultaneous dual streams can be set up as needed and the system has RS-485/422 ports for completed PTZ camera control.
For intelligent features, the V32 has video motion detection, as well as a multitude of other options that can set off alarms, making sure you have good watch over your locations. Two-way audio communication is also possible and the encoder has an RJ-45 Ethernet port for networking. Additionally, it has a microSDXC card slot for local storage, is ONVIF compliant, and has a standard 100-240 VAC power input.
|
If you own a ACTi video encoders & decoders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the ACTi V32 16-Channel Video Encoder V32 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the ACTi V32 16-Channel Video Encoder V32:
| Type | Video Encoder | | Number of Channels | 16 | | Protocol | Pelco-D, Pelco-P, Dynacolor | | Control | Remotely manual control; 32 preset points | | Compression | H.264 HP, MJPEG | | Maximum Frame Rate vs. Resolution | 30 fps at 960 x 480 (NTSC)
25 fps at 960 x 576 (PAL)
30 fps at 720 x 480 (Full D1, NTSC)
25 fps at 720 x 576 (Full D1, PAL) | | Multi-Streaming | Simultaneous dual streams based on two configurations | | Bit Rate | 28 Kbps to 6 Mbps (per stream) | | Bit Rate Mode | Constant, variable | | Image Enhancement | Brightness, saturation, contrast, hue, sharpness | | Privacy Masking | 4 regions | | Text Overlay | User-defined text on video | | Image Orientation | Image flip, image mirror | | Compression | 8 kHz, mono, PCM, 16-bit encoding, G.711 | | Audio In | 16 x Terminal block | | Audio Out | 1 x Terminal block | | Protocol | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour | | Ethernet Port | 1 x Gigabit Ethernet (10/100/1000 Base-T), RJ-45 connector | | Security | IP address filtering, HTTPS encryption, password protected user levels, IEEE 802.1X network access control, anonymous login | | Alarm Trigger | Video motion detection (3 regions), external device through digital input, scheduler in minutes, system reboot and booting successfully, video loss, video recovery, storage removed, failed to write storage | | Alarm Response | Notify control center, go to PTZ preset point or preset tour, change video settings, command other devices, e-mail notification with snapshots, save video to local storage, upload video or snapshot to FTP server, activate external device through digital output, change motion-detection profile | | Analog Video Input | 16 x CVBS, 1.0 Vpp with 75 ohms BNC connector | | Digital Input/Output | 16 x Terminal block | | Serial Port | 2 x RS-485/RS-422, terminal block | | Local Storage | microSDXC memory card slot (card not included) | | Power Source | 100-240 VAC, 50/60 Hz | | Power Consumption | 9.36 W | | Approvals | CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), UL (for built-in power adapter) | | Unified Solution | Fully compatible with ACTi software | | ISV Integration | Software Development Kit (SDK) available; ONVIF compliant | | Firmware Access Browser | Microsoft Internet Explorer 8.0 or newer (full functionality)
Safari with QuickTime installed, and other browsers with VLC installed (partial functionality) | | Operating Conditions | Temperature 14 to 122°F / -10 to 50°C
Humidity: 10 to 85% | | Dimensions | 17.5 x 1.8 x 5.6" / 44.4 x 4.5 x 14.2 cm | | Weight | 4.2 lb / 1.9 kg | | Package Weight | 6.55 lb | | Box Dimensions (LxWxH) | 19.6 x 10.0 x 4.2" | |
The user manual for the ACTi V32 16-Channel Video Encoder V32 can be downloaded in .pdf
format if it did not come with your new video encoders & decoders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other ACTi users keep a unique electronic library
for ACTi video encoders & decoderss,
where you can use our link to download the user manual for the ACTi V32 16-Channel Video Encoder V32.
The user manual lists all of the functions of the ACTi V32 16-Channel Video Encoder V32,
all the basic and advanced features and tells you how to use the video encoders & decoders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from ACTi service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the ACTi V32 16-Channel Video Encoder V32. User manuals are also
available on the ACTi website under Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
Question and answer discussion forum concerning user instructions and resolving problems with the ACTi V32 16-Channel Video Encoder V32 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the ACTi V32 16-Channel Video Encoder V32
|
|
|
|
|
