|
User manual for AER Dual Mix Audio Preamp DUAL-MIX
- Manufacturer: AER
- Basic description and contents of package
- Product classification: Pro Audio - Musical Instruments - Guitar Accessories - General Guitar Accessories
- Safety instructions
- Startup and operation of the general guitar accessories
- Tips for setting up your AER
- Settings and expert assistance
- Contact AER service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the AER Dual Mix Audio Preamp DUAL-MIX,
which address similar problems with connecting and setting up General Guitar Accessories AER.
|
User manual for the AER Dual Mix Audio Preamp DUAL-MIX
The user manual for the AER Dual Mix Audio Preamp DUAL-MIX provides
necessary instructions for the proper use of the product Pro Audio - Musical Instruments - Guitar Accessories - General Guitar Accessories.
The Dual Mix Audio Preamp from AER is a high quality two-channel preamp for instrument, line, or microphone signals. The unit offers two inputs, each for one microphone or instrument and line-level signal with switchable 24V phantom power. The Dual Mix is especially suited as channel extension in connection with amplifiers, as instrument/microphone stage preamp, and as a headphone rehearsal amplifier. This audio preamp features four multi-effect presets; two reverbs, one echo and one chorus.
|
If you own a AER general guitar accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the AER Dual Mix Audio Preamp DUAL-MIX in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the AER Dual Mix Audio Preamp DUAL-MIX:
Channels | Switchable microphone or line input Connectors: 2 x Combo XLR 1/4" phone jack, balanced microphone/line input 2 x RCA L/R, unbalanced aux input 1 x 3.5 mm stereo phone jack, unbalanced aux input
Line mode: Gain adjustment range: +3 to +20 dB Minimum input voltage: 100 mV @ -20 dBV Maximum input voltage: 3 V @ +10 dBV Input impedance: 2.2 Mohms, 60 pF Signal-to-noise ratio, A-weighted Minimum gain: 108 dB Maximum gain: 98 dB Frequency response: 20 Hz - 20 kHz @ ±1 dB THD + N (1 kHz): < 0.3%
Microphone mode: Gain adjustment range: +4 to +40 dB Minimum input voltage: 10 mV @ -40 dBV Maximum input voltage: 3 V @ +10 dBV Input impedance: 2.1 kΩ Unbalanced: 1.1 kΩ Signal-to-noise ratio, A-weighted Minimum gain: 108 dB Maximum gain: 93 dB Frequency response: 20 Hz to 20 kHz @ ±1 dB THD + N (1 kHz): < 0.1% Phantom power: 24 V, R = 1.2 kΩ per terminal, switchable for each channel, total current maximum 10 mA per channel, short circuit protected
Indicators: LED Red Headroom: 8 dB | AUX Input | Level control Minimum input voltage: 2 x 250 mV @ -14 dBV Maximum input voltage: 2 x 10 V @ +20 dBV Input impedance: 10 kΩ | Connectors | 1/4" phone jack, line output 1/4" phone jack, headphones output XLR male, DI output | Line Out | Nominal output voltage: 1 V @ 0 dBV Maximum output voltage: 9 V @ +19 dBV Output impedance: 47 Ω Min. load impedance: 2 kΩ Residual noise (master fully anticlockwise): A-weighted: 1 µV @ -120 dBV | Headphones | Output power, 1 kHz, THD = 1%: Typ. 2 x 40 mW / 32 Ω Residual noise (master fully anticlockwise): A-weighted: 3.3 µV @ -110 dBV Note: Suitable for headphones with stereo phone jack only. Do not connect any mono phone jacks. | DI Output | Level control Nominal output voltage (differential), adjustment range: 41 to 410 mV @ -28 to -8 dBV Output impedance: 47 Ω each terminal to ground Minimum load impedance (differential): 1 kΩ Residual noise (both channels in line mode), A-weighted: 3.3 µV @ -110 dBV | Tone Controls | Low: ±12 dB at 100 Hz (shelf type) High: ±13 dB at 10 kHz (shelf type) | Effects | Built-in effect: Digital effect processor with 4 presets 1 = Reverb with short predelay 2 = Reverb with long predelay 3 = Repeating delay 4 = Chorus | Footswitch | Connector: 1/4" stereo phone jack, channels mute control Function: Switch ON = channel muted | Power | Supply voltage: 24 VDC, 0.5 A Mains adapter: Mains voltage: 100 - 240 VAC Power consumption when used with Dual Mix: maximum 10 W | Housing | Aluminum | Finish | Anodized black | Dimensions | 2.56 x 4.13 x 5.31" (65 x 105 x 135 mm) | Weight | 1.06 lb (480 g) | |
The user manual for the AER Dual Mix Audio Preamp DUAL-MIX can be downloaded in .pdf
format if it did not come with your new general guitar accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other AER users keep a unique electronic library
for AER general guitar accessoriess,
where you can use our link to download the user manual for the AER Dual Mix Audio Preamp DUAL-MIX.
The user manual lists all of the functions of the AER Dual Mix Audio Preamp DUAL-MIX,
all the basic and advanced features and tells you how to use the general guitar accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from AER service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the AER Dual Mix Audio Preamp DUAL-MIX. User manuals are also
available on the AER website under Pro Audio - Musical Instruments - Guitar Accessories - General Guitar Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the AER Dual Mix Audio Preamp DUAL-MIX - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the AER Dual Mix Audio Preamp DUAL-MIX
|
|
|
|
|