|
User manual for Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000
- Manufacturer: Ashly
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Power Amplifiers
- Safety instructions
- Startup and operation of the power amplifiers
- Tips for setting up your Ashly
- Settings and expert assistance
- Contact Ashly service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000,
which address similar problems with connecting and setting up Power Amplifiers Ashly.
|
User manual for the Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000
The user manual for the Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The KLR-5000 Two-Channel High Performance Amplifier from Ashly delivers a minimum power of 2500W per channel into 2 Ohm loads, 1700W RMS per channel into 4 Ohm loads, or 1000W RMS per channel into 8 Ohm loads with both channels operating. The KLR-5000 is optimized to deliver high levels of sustained power, extraordinary audio performance, and road-proven reliability into 2, 4, or 8 ohm loads and are housed in a uniform, rugged, 2RU chassis.
|
If you own a Ashly power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000:
| Power Rating | 8Ω, 20Hz-20kHz, 1% THD: 1000W
4Ω, 20Hz-20kHz, 1% THD: 1700W
2Ω, 20Hz-20kHz, 1% THD: 2500W
Bridged mono mode:
4Ω, 20Hz-20kHz, 1% THD: 5000W | | Current Draw | All channels driven @ 4Ω
Idle: 1.14A
1/8th power pink noise: 17.5A
1/3 power sine wave: 24.7A
S/N (20Hz-20kHz, unweighted): >110dB | | Circuit | 2 step class H | | Online Thermal Dissipation | All channels driven @ 4Ω
Idle (BTU/ hr): 215
1/8th power pink noise (BTU/ hr): 3111
1/3 power sine wave (BTU/ hr): 4395
Input gain switch: 1.4V, 26dB, 32dB | | Frequency Response | 1W @ 8Ω 20Hz-20kHz (-3dB down point): +0.3dB 5Hz-70kHz | | Signal-to-Noise Ratio | S/N (20Hz-20kHz, unweighted) | | Damping Factor | 100Hz @ rated power @8Ω: >380 | | Total Harmonic Distortion (THD) | 20Hz-20kHz: 10dB below rated output @ 4Ω | | Impedance | 12 kΩ, balanced | | HPF | 30Hz, 50Hz, off (12dB/ Oct) | | Protection | Output over current, DC output, chassis temperature, mains breaker (KLR-5000 uses internal mains fuse) | | Cooling | Variable speed fan, front-to-rear air flow | | Front Panel | Protection/ clip, signal, power | | Attenuation | Per channel, front panel | | Input Connections | 3-pin Euroblock, XLR, ¼" TRS phone jack | | Output Connectors | Each channel four pin Speakon type | | Power Requirements | 3-prong NEMA 5-20 | | Temperature | 14-104°F (-10-40°C) | | Humidity | 0-90% | | Compliance | cCSAus, FCC, CE, RoHS | | Dimensions | 19 x 3.5 x 16" (482 x 88 x 407mm) | | Weight | 28.2 lb. (12.8kg) | | Package Weight | 35.1 lb | | Box Dimensions (LxWxH) | 22.6 x 21.6 x 6.5" | |
The user manual for the Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000 can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Ashly users keep a unique electronic library
for Ashly power amplifierss,
where you can use our link to download the user manual for the Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000.
The user manual lists all of the functions of the Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Ashly service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000. User manuals are also
available on the Ashly website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Ashly KLR-5000 Two-Channel High Performance Amplifier KLR-5000
|
|
|
|
|
