User manual for Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE
- Manufacturer: Ashly
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Power Amplifiers
- Safety instructions
- Startup and operation of the power amplifiers
- Tips for setting up your Ashly
- Settings and expert assistance
- Contact Ashly service
- Warranty information
We recommend checking out our discussion threads on the Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE,
which address similar problems with connecting and setting up Power Amplifiers Ashly.
User manual for the Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE
The user manual for the Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The ne800pe from Ashly is a rackmount stereo power amplifier with network capability, ideal for installed audio applications. The amplifier has a 10/100 Ethernet jack that allows you to control and monitor the amplifier's functions over a network with the included Proteane software. The rear panel offers XLR and Euroblock analog inputs, Speakon and Euroblock speaker outputs, and XLR and Euroblock analog Aux outputs.
The factory-installed Protea DSP module allows you to configure each input with DSP blocks for dynamic control, gain function, graphic and/or parametric EQ, high and low pass filters, time delay, metering, and a test signal generator. It also offers a mixer section that allows you to route an input to any and all outputs. The outputs have the same DSP function as the inputs, with the added capability of an automated crossover setup. Up to 35 DSP presets and subpresets can be stored and recalled in real time via Ethernet with the included software.
A blank panel on the rear allows you to install an optional CobraNet CNM-2 card for CobraNet capability, or an AES/EBU input to support digital audio. Other useful amplifier functions include DC voltage control, preset recalls, and remote power standby. LED indicators provide you with at-a-glance knowledge of power, standby, network, protection circuitry, audio levels, operating mode, temperature, and current.
If you own a Ashly power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE:
| Power Rating || 225W/Channel @ 8Ω |
400W/Channel @ 4Ω
800W @ 8Ω Bridged
| Damping Factor || > 250 |
| Input Sensitivity || 26 or 32dB, or 1.4V (Switch-Selectable) |
| Input Impedance || 20 kOhms, Balanced |
| Gain || Variable |
| Frequency Response || 20Hz - 20kHz ±1dB |
| Signal-to-Noise Ratio || > 98dB |
| Total Harmonic Distortion (THD) || < 0.5% |
| Connectors || 2 x XLR Inputs |
2 x Euroblock Inputs
2 x XLR Aux Outputs
1 x Euroblock Aux Output
2 x Speakon Outputs
1 x Euroblock Speaker Output
1 x 10/100 Ethernet Port
1 x Remote Euroblock Connector
1 x Input Expansion Slot
1 x AC Power Input
| Controls || 1 x Power Switch |
2 x Level Control Knobs
1 x Mode Selector Switch
1 x High Pass Filter Switch
1 x Sensitivity Selector Switch
| Indicators || 2 x 4-Segment Level/Clip LED Meters |
2 x Temperature LEDs
2 x Current LEDs
1 x Bridge LED
1 x Power LED
1 x Standby LED
1 x Protect LED
1 x Power Switch Disable LED
1 x COM LED
| Cooling || Variable-Speed Fan, Front-to-Back Airflow |
| Power Consumption || 0.5A, 35W (1/8 Idle) |
| Power Requirements || 100-220VAC |
| Dimensions (HxWxD) || 3.5 x 19 x 15.5" (89 x 483 x 392mm) |
| Weight || 21 lbs (9.5kg) |
| Package Weight || 27.0 lb |
| Box Dimensions (LxWxH) || 19.0 x 16.0 x 4.0" |
The user manual for the Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Ashly users keep a unique electronic library
for Ashly power amplifierss,
where you can use our link to download the user manual for the Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE.
The user manual lists all of the functions of the Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Ashly service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE. User manuals are also
available on the Ashly website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Ashly ne800pe Network-Enabled Stereo Power Amplifier NE800PE