PDF-MANUALS.com | User manual here!
User manual

User manual Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004

Operating instructions and pdf manual for use - Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004 User manual, User manual Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004, Ashly, nXp, Series, NXP4004, 4-Channel, 400W,


User manual for Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004

Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004
  • Manufacturer: Ashly
  • Basic description and contents of package
  • Product classification: Pro Audio - Live Sound - Power Amplifiers
  • Safety instructions
  • Startup and operation of the power amplifiers
  • Tips for setting up your Ashly
  • Settings and expert assistance
  • Contact Ashly service
  • Troubleshooting
  • Warranty information
We recommend checking out our discussion threads on the Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004, which address similar problems with connecting and setting up Power Amplifiers Ashly.



User manual for the Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004

The user manual for the Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004 provides necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.

The nXp Series NXP4004 4-Channel 400W Power Amplifier with Programmable Outputs & Protea Software Suite from Ashly is a Class-D switching amplifier combined with a switch mode power supply. This amplifier meets the requirements of demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces, and convention centers.
If you own a Ashly power amplifiers and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004 in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004:
Specifications
    Processor
    Input Source Protea DSP Options: Analog, auto (net, AES3, analog)

    All DSP functions can be linked to 1 of 16 link groups

    Limiter Brick Wall Limiter: Threshold: -20 to 20 dBu
    Ratio: Infinite
    Attack: 0.2 to 50 ms/dB
    Release: 5 to 1000 ms/dB
    Control Advanced Gate Controls
    Key Engage Enable
    Key Frequency: 20 Hz to 20 kHz
    Key Bandwidth: 0.016 to 3.995 octave
    Gain Gain (with / without VCA): -50 to 12 dB, off, polarity invert
    Digital VCA Groups: 4 available
    Remote RD8C Gain: Enable per channel, 0 dB to -∞
    WR-5 (neWR-5) Remote Gain: 0 to -50 dB, mute
    EQ Type For 31-Band
    Filter Type: Constant Q or proportional
    Bandwidth: 0.499 octave to 0.25 octave

    For Parametric 2,4,6, or 10 Band
    Frequency: 20 to 20 kHz
    Level: -30 to 15 dB
    Q Value: 0.016 to 3.995 octave

    For Hi / Low Shelf 6 / 12 dB/octave
    Frequency: 20 Hz to 20 kHz
    Level: -15 to 15 dB

    For All Pass
    Frequency: 20 Hz to 20 kHz

    For Variable Q HP / LP
    Frequency: 20 Hz to 20 kHz
    Q Value: 3.047 to 0.267

    For Notch / Bandpass
    Frequency: 20 Hz to 20 kHz
    Q Value: 92.436 to 0.267

    Feedback Suppressor (48 kHz Sampling Rate)
    12 x filters
    In/Out per filter
    Lock (per filter) and global lock
    Filter Modes: Float, restricted, manual
    Filter Type: Notch, parametric
    Filter Frequency Range: 20 Hz to 20 kHz
    Notch Filter: -∞
    Parametric Filter: 15 to -30 dB
    Filter Bandwidth 0.016 to 3.995 Octave
    Detector Sensitivity: 5 levels
    Float Time 5 minutes to 24 hours
    Filter FIR Filter: .fir or .csv file types
    Crossover 2 Way, 3 Way, 4 Way Crossover & High Pass / Low Pass Filters
    Bessel & Butterworth Filters: 12 / 18 / 24 / 48 dB/octave
    Linkwitz-Riley Filter: 12 / 24 / 48 dB / octave
    Frequency: Off, 20 Hz to 20 kHz
    Delay Sampling Rate: At 48 kHz (Input Time, Distance & Temperature)
    Speaker Delay: 0 to 21 ms
    Delay: 0 to 682 ms

    At 96 kHz (Input Time, Distance & Temperature)
    Speaker Delay: 0 to 10.6 ms
    Delay: 0 to 341 ms
    Audio Metering Range: -60 to 20 dBu
    Increments: 1 dB
    Peak Hold Indicator
    Signal Generator Pink Noise, White Noise, Sine Wave
    Signal Level: Off, -50 to 20 dBu
    Sine Wave Frequency: 20 Hz to 12 kHz
    Processor Input A/D, Output D/A: 24 bit
    DSP Processors: 32-bit floating point
    Sample Rates: 48 kHz, 96 kHz
    Propagation Delay @ 48 kHz: 1.42 ms
    Propagation Delay @ 96 kHz: 0.71 ms
    Mixer Gain (0.5 dB Increments): Off, -50 to 12dB
    Mute: Per channel
    Auto-mixer Enabled: Per channel
    Global Auto-mixer Response: 0.01 to 2 sec
    Enable Ducking at Mixer
    Ducking LED: Per channel if enabled
    Metering: Level, auto-mixer level
    Compressor
    Threshold -20 to 20 dBu
    Ratio 1.2:1 to infinite
    Attack 0.2 to 50 ms
    Release 5 to 1000 ms/dB
    Detectors Peak / average
    Attenuation 2 available
    Metering In, out, attenuation, graphical
    Auto Leveler Controls
    Level Target Level: -40 to 20 dBu
    Action Type Gentle, normal, aggressive, user defined
    Maximum Gain 0 to 22 dB
    Metering Input, gain, attenuation
    Ratio 1.2:1 to 10:1
    Threshold -30 to 0 dB
    Gain 5 to 1000 ms/dB
    Hold 0 to 6 seconds
    Ambient Noise Compensation
    Gain Maximum: -20 to 20 dB
    Minimum Base: -40 to 20 dB
    Gain Adjustment Range 0.2 to 20 s/dB
    Groups Link Groups: 16 available
    Input Channels ANC: 1 to 4
    Threshold Range Noise: -40 to 20 dBu
    Ratio Program/Ambient Gain: 0.3:1 to 3:1
    Metering Input level, attenuation, average noise
    Ducking Trigger Threshold: -80 to 20 dBu
    Ducking Release: 5 to 1000 ms/dB
    Ducking Depth: 0 to -30 dB, -∞
    Enable Ducking at Matrix Mixer
    Metering: Input
    Gate
    Threshold -80 to 20 dBu
    Range Off, 100 to 0 dB
    Attack 0.2 to 50 ms/dB
    Release 5 to 1000 ms/dB
    Metering Key signal, gate LED, graphical
    Power Requirements
    Power At 50 Hz
    Nominal (Automatic Sensing SMPS): 120 VAC
    Operating Range: 70 to 135 VAC
    Minimum Power-Up: 85 VAC

    At 60 Hz
    Nominal (Automatic Sensing SMPS): 240 VAC
    Operating Range: 140 to 270 VAC
    Minimum Power-Up: 170 VAC
    Connector Power Cable Connector: 20 A powerCON
    Maximum Output Power Per Channel, Low-Z Output, All Channels Driven
    2/4/8 Ω: 400 W
    Output Low Z Output, Bridge Mode, All Channels Driven: 800 W (4/8 Ω)
    70V, 100V Output, All Channels Driven: 400 W (70/100 V (per channel)
    Power Draw Sleep Mode: < 1 W
    Standby Mode: 40 W
    Idle (No Signal): 70 W

    All Channels Driven

    Current Draw For 120 VAC
    Sleep Mode: 0.1 A
    Standby Mode: 0.70 A
    Idle (No Signal): 1.30 A

    For 240 VAC
    Sleep Mode: 0.05 A
    Standby Mode: 0.35 A
    Idle (No Signal): 0.65 A

    Maximum, All Channels Driven, Typical Input
    1/8 Max Power @ 2 Ω): 5 A for 120 VAC, 2.5 A for 240 VAC

    Dissipation Thermal Dissipation: Sleep Mode: <3.4 BTU/hr
    Standby Mode: 136 BTU/hr
    Idle (no signal): 238 BTU/hr
    Typical (1 / 8 Max Power @ 2 Ω): 595 BTU/hr

    All Channels Driven

    LED Indicators Front Panel LED Indicators
    White: Power Switch: On, off, standby (flashing)

    Red LED:
    Clip / Mute Per Channel: Clip @ 1 dB below full output / mute
    Protect: On (fault condition or shut down), Off

    Green LED:
    Signal Per Channel: -18 dBu, below rated output
    Bridge Per Channel Pair: On, off
    Com: On, for Ethernet data or device ID
    Current Per Channel: Proportional to output

    Yellow LED:
    Temperature Per Channel: On dim at 90% maximum operating temperature, full bright + protect at 100%
    Sleep: On, amplifier is asleep from audio inactivity
    Disable: On, power switch & front panel attenuators are disabled
    General
    Voltage Gain Selectable at 26, 32, or 38 dB, and 1.4 V

    0 dBu = 0.775 VRMS

    Damping Factor >250 (8 Ω load <1 kHz)
    Filter Input High Pass Filter: 80 Hz 2nd order
    Distortion <0.5% SMPTE, typical
    <0.5% THD-N, typical (8 Ω, 10 dB below rated power, 20 Hz to 20 kHz)
    Channel Separation -75 dB (dB from full output, 1 kHz)
    Signal / Noise 20 Hz to 20 kHz, un-weighted
    >105 dB
    Frequency Response 20 Hz to 20 kHz, ±0.05 dB
    Connector Balanced Input Connector: Euroblock 3.5 mm, 1/4" TRS and XLR combo jack
    Input Impedance 10 kΩ
    Maximum Input Level 21 dBu
    Speaker Output Connector: Neutrik & speakON
    Network Control Network: Compatible with standard 100 MB Ethernet
    AUX Outputs Connector: Balanced Euroblock 3.5 mm
    Maximum Output Level: 21 dBu
    Contact Closure Remote Standby: Euroblock 3.5 mm, close contact to GND for standby mode
    Preset Recall: Euroblock 3.5 mm, close contact to GND for preset 1-4 recall
    Data Data Connection: Euroblock 3.5 mm - Gnd, 18 V, in, out
    Outputs Fault Condition Logic Outputs: 4 x 3.5 mm Euroblock
    Attenuation Front panel, software, offset link group, and remote per channel, fully off = mute
    Protection Circuits Inrush current limitation, temperature monitoring, output over-power protection, and mains fuses
    Cooling Continuously variable temperature controlled axial fans
    Environmental Non-condensing 32 to 113°F (0 to 45°C)
    Dimensions (W x H x D) 19.0 x 3.5 x 16.8" (48.3 x 8.9 x 42.8 cm)
    Weight 32.4 lb (14.8 kg)
    Packaging Info
    Package Weight 32.5 lb
    The user manual for the Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004 can be downloaded in .pdf format if it did not come with your new power amplifiers, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other Ashly users keep a unique electronic library for Ashly power amplifierss, where you can use our link to download the user manual for the Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004.

    The user manual lists all of the functions of the Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004, all the basic and advanced features and tells you how to use the power amplifiers. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from Ashly service.

    If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004. User manuals are also available on the Ashly website under Pro Audio - Live Sound - Power Amplifiers.



    Discussion Question and answer discussion forum concerning user instructions and resolving problems with the Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004 - no comments have been made yet - be the first to add a comment

    Post new comment/question/response regarding the Ashly nXp Series NXP4004 4-Channel 400W Power Amplifier NXP4004

    Fields marked with * must be filled out.
    Your name *:
    E-mail :
    Subject *:
    Message text *:
    Enter the code *:
    (spam block)
    "manual"
    If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

     

    Can't find what you're looking for? Try Google Search!



    Current discussions
    Most recently discussed products:

    User's manuals downloading help - Linhof Compendium Lens Shade Master Technika 1926
    Posted by: Jean-Louis LLECH
    2024-03-28 18:30:04

    Hi, I am 75 years old, I live in Beauvais, France. I was during 43 years a S.E. in the french civil service of Equipment and Housing, now retired. I have been practicing photography for over half a century. I mostly use Large and Medium Format f...
    Simmons 6-24x50 - Simmons 6-24x50 Predator Varmint Riflescope 656245
    Posted by: Stuart Williams
    2024-03-26 12:36:48

    I have located manual for this on your site but how do I download / print it please ?...
    USER MANUAL TSP2 17 BUN - Telmax TSP2-17-BUN Dual 17" Presidential TSP2-17BUN
    Posted by: AYO
    2024-03-26 10:07:35

    MANUAL REQUIRED TO SET UP...
    lens servo - Fujinon ESM-15A-SA Digital Servo Unit for Fujinon ESM-15A-SA
    Posted by: julia yoko
    2024-03-25 22:07:20

    i would like to know where the lens manual can be found...
    NEPVS14-17 - ITT Night Enforcer PVS-14 Pinnacle Night Vision ITTE-NEPVS14-17
    Posted by: Keller Bradshaw
    2024-03-25 17:57:35

    Hi, I would like a user manual for the NEPVS14-17...

    Uploaded instruction manuals
    Upload a link to an instruction manual for a depicted product here:

    Link format "http://www.link2manual.com/manual.pdf"

    Enter the code: "manual"






    PDF-MANUALS.com - Community administered database of instructions for use and PDF User manual
    sitemap.txt alx