|
User manual for Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT
- Manufacturer: Atlas Sound
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Install Sound Mixers
- Safety instructions
- Startup and operation of the install sound mixers
- Tips for setting up your Atlas Sound
- Settings and expert assistance
- Contact Atlas Sound service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT,
which address similar problems with connecting and setting up Install Sound Mixers Atlas Sound.
|
User manual for the Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT
The user manual for the Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Install Sound Mixers.
The Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer with Priority Sense is designed for applications where paging, priority music override or remote input selection with level control are required. Use alone or in conjunction with amplifiers in meeting rooms, digital signage, luxury suites, and other applications requiring versatile, stereo or mono multi source mix control.
The unit includes one mic/balanced line input via removable Phoenix style connector and three stereo 3.5mm inputs. Switchable phantom power is provided for the mic input to facilitate condenser microphones. The low noise internal mic preamps ensure clarity and quiet operation without unwanted coloration. A 12dB/octave high pass filter at 125Hz also is available on the mic input to minimize bass rumble and low frequency feedback.
The TSD-MIX42RT can be used in conjunction with an Atlas Audio WPD-MIX42RT decor style wall plate that is designed for remote activation of the TSD-MIX42RT mic/line mixer. When connected to the TSD-MIX42RT and the Juke Box Override, any page made through the system will override the selected source so that the page can be heard clearly.
Priority paging can be accomplished via contact closure or VOX trigger on Input 1 that will mute Inputs 2, 3, or 4 (assignable). Remote level control feature allows use of the Atlas Sound AAVC-10K or WPD-VC10K decorative wall plate control for remote adjustment of either the entire master mix bus or inputs 1, 2, 3. A variable output limiter provides system protection by reducing clipping and distortion which can be useful when mixing mic and/or line sources with varying volumes. The unit requires a power supply (not included) for operation.
|
If you own a Atlas Sound install sound mixers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT:
| Type | 3x Unbalanced 1/8" (3.5 mm) stereo
1x Balanced mic or line selectable removable 3 position captive screw 1/8" (3.5 mm) spacing | | Impedance | 1/8": 10 kΩ
Captive Screw: 1.2 kΩ (balanced), 600 Ω (unbalanced) | | Input Level | 1/8": 316 mV (-10 dB) = 2 V (+6 dBV) Balanced Output, Maximum Input 1.6 V (4.1 dBV) | | Phantom Power | Captive Screw: 24 VDC, defeatable | | Low Cut Filters | Captive Screw: 125 Hz/12 dB, defeatable | | Line Input Level | 1 V (0 dBV) Balanced = 2 V (+6 dBV) Balanced Output, Maximum Input 6 V (15 dBV) | | Mic Input Level | 46 dB Gain, 1 0mV (-40 dB) Balanced = 2 V (+6 dBV) Balanced Output, Maximum Input 40 mV (-27 dBV) | | Type | 2x Balanced line (L & R) removable 3 position captive screw 1/8" (3.5 mm) spacing | | Impedance | Balanced: 300 Ω
Unbalanced: 150 Ω | | Line Output Level | 1 V (0 dBV) In = 2 V (+6 dBV), Maximum Output 6 V (15 dBV) | | Input Level | 4x Removable knobs with security covers | | Mute | Mute CC: Contact closure, removable 2 position captive screw 1/8" (3.5 mm) spacing
VOX Mute Sens: Trim adjust for mic sensitivity | | Limiter | Output Limiter: Threshold adjust | | Remote | Remote Level: Control port 10 kΩ external pot, removable 2 position captive screw 1/8" (3.5 mm) spacing | | Voltage Output | DC 12 V Output: 12 V DC to power wall controller LED, removable 2 position captive screw 1/8" (3.5 mm) spacing | | DIP Switch | Dip Switch # 1: 24 VDC Phantom Power
Dip Switch # 2: Input 4 Mic or Line Select
Dip Switch # 3: Low Cut Filter 125 Hz
Dip Switch # 4: Juke Box Override
Dip Switch # 5: Juke Box Override Mute Hold Delay
Dip Switch # 6: Input 3 Mute Receive
Dip Switch # 7: Input 2 Mute Receive
Dip Switch # 8: Input 1 Mute Receive
Dip Switch # 9: Outputs Left and Right Stereo/Mono
Dip Switch # 10: Remote Level Master/Inputs 1,2,3
Dip Switch # 11: Wall Plate Activation Note: Juke Box Override will not work when Remote Wall Plate is activated
Dip Switch # 12: Not Used | | Input Signal | 1x Green, 25 mV ON Threshold | | Peak | 1x Red -3 dB Before Clip | | Limiter | 1x Red, Limiter Activation | | Power | 1x Blue | | Frequency Response | 2 0Hz to 20 kHz (±1 dB) | | THD | 0.06% @ 1 kHz | | Signal to Noise Ratio | Line to Line: 85 dBV
Mic to Line: 78 dBV | | Limiter | Output Limiter: Threshold Adjust 50 mV Minimum Output to No Limit | | Voltage | 24 VDC, 60 mA | | Power Consumption | Current: 60 mA
VA Watts: 1.4 W | | Chassis | Aluminum | | Dimensions (H x W x D) | 1.5 x 4 x 2.5" (39 x 101 x 2.5 mm) | | Weight | 13.4 oz (300 g) | | Package Weight | 1.0 lb | | Box Dimensions (LxWxH) | 5.19 x 3.5 x 2.5" | |
The user manual for the Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT can be downloaded in .pdf
format if it did not come with your new install sound mixers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Atlas Sound users keep a unique electronic library
for Atlas Sound install sound mixerss,
where you can use our link to download the user manual for the Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT.
The user manual lists all of the functions of the Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT,
all the basic and advanced features and tells you how to use the install sound mixers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Atlas Sound service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT. User manuals are also
available on the Atlas Sound website under Pro Audio - Installation Sound - Install Sound Mixers.
Question and answer discussion forum concerning user instructions and resolving problems with the Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Atlas Sound TSD- MIX42RT 4x2 Mic/Line Mixer TSD-MIX42RT
|
|
|
|
|
