User manual B W Series 8 486 UV/IR Cut Filter 66-1070165
Operating instructions and pdf manual for use - B W Series 8 486 UV/IR Cut Filter 66-1070165 User manual, User manual B W Series 8 486 UV/IR Cut Filter 66-1070165, B, W, Series, 8, 486, UV/IR, Cut, Filter, 66-1070165, Video
User manual for B W Series 8 486 UV/IR Cut Filter 66-1070165
Manufacturer: B+W
Basic description and contents of package
Product classification: Photography - Filters - IR Control
Safety instructions
Startup and operation of the ir control
Tips for setting up your B+W
Settings and expert assistance
Contact B+W service
Troubleshooting
Warranty information
Price: 137 USD
We recommend checking out our discussion threads on the B W Series 8 486 UV/IR Cut Filter 66-1070165,
which address similar problems with connecting and setting up IR Control B+W.
User manual for the B W Series 8 486 UV/IR Cut Filter 66-1070165
The user manual for the B W Series 8 486 UV/IR Cut Filter 66-1070165 provides
necessary instructions for the proper use of the product Photography - Filters - IR Control.
B+W's Series 8 486 UV/IR Cut Filter has a completely colorless glass carrier coated with a number of extremely thin, partially reflecting layers with precisely computed thicknesses, similar to a multi layer coating. This filter does not block by means of absorption, but rather by interference of the unwanted UV and IR radiation that is repeatedly reflected between these layers, affecting the wavelengths on both sides of the visible spectrum with a steep cut-off. It is used mainly on digital and video cameras with CCD sensors without an integrated IR protection filter, because the IR sensitivity of the CCD sensor would otherwise cause color changes and un-sharpness. That un-sharpness results from the chromatic aberration of the lenses that are only corrected for visible light. In the visible range, the transmission curve is very high and straight. This filter is completely clear and it requires no increase in exposure.
The Multi-Resistant Coating (MRC) is not only an extraordinarily effective multiple layer coating, it is also harder than glass, so that it protects filters from scratches (for instance when cleaning the filters), and it is also water and dirt repellent, thus facilitating filter maintenance.
This filter uses the standard B+W F-Pro filter mount, which has a front accessory thread and is made of brass. Compared to the earlier standard mount introduced in 2001, the F-Pro mount has become thinner. Now it can be used with wide angle lenses, including most 24mm focal lengths on a full frame body, without vignetting. Another advantage of the F-Pro mount is it's modified retaining ring, which is no longer threaded in from the front, but holds the filter glass in place from the back. When removing a filter or lens hood that has been screwed on too tight to the filter, the retaining ring is not at risk of loosening.
If you own a B+W ir control and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the B W Series 8 486 UV/IR Cut Filter 66-1070165 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the B W Series 8 486 UV/IR Cut Filter 66-1070165:
Specifications
Type
UV/IR Control
Size
Series 8
Filter Factor
1
Multi-Coated
Yes
The user manual for the B W Series 8 486 UV/IR Cut Filter 66-1070165 can be downloaded in .pdf
format if it did not come with your new ir control, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other B+W users keep a unique electronic library
for B+W ir controls,
where you can use our link to download the user manual for the B W Series 8 486 UV/IR Cut Filter 66-1070165.
The user manual lists all of the functions of the B W Series 8 486 UV/IR Cut Filter 66-1070165,
all the basic and advanced features and tells you how to use the ir control.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from B+W service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the B W Series 8 486 UV/IR Cut Filter 66-1070165. User manuals are also
available on the B+W website under Photography - Filters - IR Control.
Question and answer discussion forum concerning user instructions and resolving problems with the B W Series 8 486 UV/IR Cut Filter 66-1070165 - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the B W Series 8 486 UV/IR Cut Filter 66-1070165 - no comments have been made yet - be the first to add a comment