PDF-MANUALS.com | User manual here!
User manual

User manual Benchmark DAC2 DX Digital to Analog Audio 500-15300-500

Operating instructions and pdf manual for use - Benchmark DAC2 DX Digital to Analog Audio 500-15300-500 User manual, User manual Benchmark DAC2 DX Digital to Analog Audio 500-15300-500, Benchmark, DAC2, DX, Digital, to, Analog, Audio, 500-15300-500


User manual for Benchmark DAC2 DX Digital to Analog Audio 500-15300-500

Benchmark DAC2 DX Digital to Analog Audio 500-15300-500
  • Manufacturer: Benchmark
  • Basic description and contents of package
  • Product classification: Pro Audio - Recording - Monitoring Accessories
  • Safety instructions
  • Startup and operation of the monitoring accessories
  • Tips for setting up your Benchmark
  • Settings and expert assistance
  • Contact Benchmark service
  • Troubleshooting
  • Warranty information
Benchmark DAC2 DX Digital to Analog Audio 500-15300-500 Benchmark DAC2 DX Digital to Analog Audio 500-15300-500
Click to enlarge image

We recommend checking out our discussion threads on the Benchmark DAC2 DX Digital to Analog Audio 500-15300-500, which address similar problems with connecting and setting up Monitoring Accessories Benchmark.



User manual for the Benchmark DAC2 DX Digital to Analog Audio 500-15300-500

The user manual for the Benchmark DAC2 DX Digital to Analog Audio 500-15300-500 provides necessary instructions for the proper use of the product Pro Audio - Recording - Monitoring Accessories.

The black DAC2 DX Digital to Analog Audio Converter from Benchmark is a digital to analog converter with XLR AES digital input and dual stereo balanced/unbalanced analog output. The DAC2 system supports multi-mode asynchronous USB system. It features digital XLR, coaxial, optical and USB inputs and converts the audio into analog XLR, and RCA stereo outputs. This half rack 1RU provides low noise, low distortion, improved accuracy, and a high sample-rate asynchronous USB audio interface. All inputs are fully isolated from interface jitter by the UltraLock2 jitter attenuation system. Internal digital processing and conversion is 32-bits, and includes 3.5 dB of headroom above 0 dBFS. Three balanced 32-bit D/A converter are summed together for the main output bus. Two channels are reserved for the auxiliary RCA output bus. DSD (in DoP 1.1 format) is automatically detected on the USB, coaxial, and XLR digital inputs. The system switches between native DSD and native PCM conversion.

The DAC2 DX combines active analog gain control, passive low-impedance attenuators, a 32-bit digital gain control, and a servo-driven volume control. The gain coefficients are filtered and passed to a 32-bit high-headroom DSP system. The 32-bit output of this system is connected to the 32-bit digital to analog converters. The DSP system is designed to preserve L/R balance and stereo imaging.

This unit supports USB Audio 2.0, DSD, and USB Audio 1.1. It is frequency agile, and will follow sample rate changes initiated by the computer and/or the media playback software. The USB communications are asynchronous in all modes. This USB mode can be selected from the front panel or from the remote control (sold separately). The driverless USB Audio 1.1 mode allows quick plug-and-play connections to Windows, MAC, iOS, and many Linux operating systems without installing drivers. The USB subsystem remains active when the DAC2 DX converter is powered down. This prevents interruptions to the computer playback operations and eliminates the need to reconfigure the computer every time the converter is turned on.

The DAC2 DX has a low-jitter master clock which controls the transfer of audio data from the computer to the USB sub-system. The computer asynchronously transfers audio data to a buffer in the DAC2 DX. The Asynchronous USB system supports USB Audio 2.0 for high-resolution 192kHz, and DSD playback. No drivers are required for MAC operating systems. An easy-to-install driver adds 192 kHz and DSD capabilities to Windows operating systems.

The DAC2 DX has two analog output buses. Each bus can be placed in a volume-control bypass mode in order to provide a full-level output to a downstream analog volume control. The bypass function should be enabled whenever a Hi-Fi pre-amplifier is inserted between the converter and the power amplifier. The second coaxial input can be reconfigured as a digital output. In output mode, any selected digital input (including USB) will pass through to the coaxial output. The digital pass through is bit-transparent and even supports DSD (DoP 1.1). Dolby digital and DTS formats can be passed through to a surround processor.

The DAC2 features the HPA2 high-current, zero-ohm headphone power amplifier designed to deliver the full performance of the DAC2 to the headphones. The HPA2 maintains less than 0.0003% THD+N under full load. The DAC2 has two 1/4" headphone jacks on the front panel. The performance of the HPA2 remains consistent even when two headphones are being driven simultaneously.
If you own a Benchmark monitoring accessories and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the Benchmark DAC2 DX Digital to Analog Audio 500-15300-500 in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Benchmark DAC2 DX Digital to Analog Audio 500-15300-500:
Input Connectors 1 x USB audio input
1 x AES XLR input
2 x optical inputs
2 x coaxial inputs (or 1 input and 1 pass-through)
Frequency Setting Fs = 44.1 to 96 kHz, 20 to 20 kHz BW, 1 kHz test tone, 0 dBFS = +24 dBu (unless noted)
Signal to Noise Ratio (SNR) NR - A-Weighted, 0 dBFS = +20 to +29 dBu 126 dB
SNR - Unweighted, 0 dBFS = +20 to +29 dBu 123 dB
Total Harmonic Distortion(THD) + N THD+N, 1 kHz at 0 dBFS -109 dBFS, -109 dB, 0.00035%
THD+N, 1 kHz at -1 dBFS -110 dBFS, -109 dB, 0.00035%
THD+N, 1 kHz at -3 dBFS -113 dBFS, -109 dB, 0.00035%
THD+N, 20 to 20 kHz test tone at -3 dBFS -112 dBFS, -108 dB, 0.00040%
Frequency Response Fs=96 kHz +0 dB, -0.04 dB (20 to 20 kHz)
-0.04 dB at 10 Hz
0.04 dB at 20 kHz
-0.04 dB at 40 kHz
-0.7 dB at 45 kHz
Fs=48 kHz +0 dB, -0.04 dB (20 to 20 kHz)
-0.04 dB at 10 Hz
-0.04 dB at 20 kHz
Crosstalk -116 dB at 20 kHz
-130 dB at 1 kHz
-137 dB at 20 Hz
Max Amplitude Maximum Amplitude of Jitter Induced Sidebands (10 kHz 0 dBFS test tone, 12.75 UI sinusoidal jitter at 1 kHz): < -144 dB
Maximum Amplitude of Spurious Tones with 0 dBFS test signal: < -138 dB
Maximum Amplitude of Idle Tones: < -147 dB Maximum Amplitude of AC line related Hum & Noise: < -140 dB
Inter-channel Differential Phase (Stereo Pair - any sample rate): +/- 0.25 degrees at 20 kHz
Differential Phase (Between DAC2 HGC Units Fs<110 khz) any sample rate: +>
Audio Performance Lock Time after Fs change: 400 ms
Soft Mute Ramp Up/Down Time: 50 ms
Mute on Receive Error: Yes
Mute on Lock Error: Yes
Mute on Idle Channel: No
50/15 us De-Emphasis Enable Automatic in Consumer Mode
De-Emphasis Method Digital IIR
De-Emphasis Supported at Fs = 32, 44.1, 48 kHz
Group Delay 1.36 ms at 44.1 kHz
1.27 ms at 48 kHz
0.90 ms at 88.2 kHz
0.82 ms at 96 kHz
0.51 ms at 176.4 kHz
0.47 ms at 192 kHz
Digital Audio Inputs 1 x USB
2 x Optical
1 x AES
2 x Coaxial
Number of Channels: 2
Input Sample Frequency Range: 28 to 210 kHz (Coaxial and XLR)
28 to 96 kHz (Optical)
44.1, 48, 88.2, 96, 176.4, 192 kHz (USB)
Maximum Input Word Length: 24-bits
Digital Input Impedance: 75 Ohms Coaxial, 110 Ohms XLR
DC Blocking Capacitors on Digital Inputs: Yes (Coaxial and XLR Inputs)
Transient and Over-Voltage Protection on Digital Inputs: Yes (Coaxial and XLR Inputs)
Transformer Coupling on Digital Inputs: Yes (XLR Input)
Minimum Digital Input Level: 250 mV p-p (Coaxial and XLR Inputs)
Jitter >12.75 UI sine, 100 Hz to 3 kHz
>1.5 UI sine at 20 kHz
>1.5 UI sine at 40 kHz
>1.5 UI sine at 80 kHz
>1.5 UI sine at 90 kHz
>0.25 UI sine above 160 kHz
Jitter Attenuation Method Benchmark UltraLock2- all inputs
Balanced Audio 2 x XLR male, Gold-pin Neutrik, analog output
Output Impedance: 60 ohms (attenuator off), 425 ohms (attenuator = 10 dB), 135 ohms (attenuator = 20 dB)
Analog Output Clip Point: +30 dBu
Factory Set Bypass Level (at 0 dBFS): +24 dBu (attenuator = 0 dB)
Output Level Range (at 0 dBFS) In 'Variable' Mode Off to +24 dBu (attenuator off)
Off to +14 dBu (attenuator = 10 dB)
Off to +4 dBu (attenuator = 20 dB)
Output Level Variation with Sample Rate (44.1 kHz vs. 96 kHz): < +/- 0.006 dB
Unbalanced Audio 4 x RCA, analog output
Output Impedance: 30 ohms
Analog Output Clip Point: +13.5 dBu
Factory Set Home Theater Bypass Output Level (at 0 dBFS): +8.2 dBu (2 Vrms)
Output Level Range (at 0 dBFS): Off to +8.2 dBu
Output Level Variation with Sample Rate (44.1 kHz vs. 96 kHz): < +/- 0.006 dB
Headphone Output 2 x 1/4" TRS, with switch on left-hand jack, HPA2
Output Impedance < 0.11 Ohms Output Level Control: Stereo Control, front panel
Output Level Range (at 0 dBFS) into 60-Ohm Load: Off to +17 dBu
Maximum Output Current: 250 mA
Overload Protection (independent per channel): Current limited at 300 mA, Thermal
Bandwidth: > 500 kHz
THD+N: -106 dB, 0.0005% into 30 Ohms at +18 dBu (1.26 W)
Status Display Indicators Type and Location: 16 LED's on front panel
Selection/Status Indication:
2 - Dim/Mute
6 - Input
2 - Bypass/Calibrated Output
2 - Word length
4 - Sample Rate
AC Power Requirements Nominal Input Operating Voltage Range (VAC RMS): 100 - 240 V
Frequency: 50 - 60 Hz
Power: < 0.5 W, idle
12 W, typical program
15 W, maximum
Fuses: 5 x 20 mm (2 required)
0.5 A, 250 V, Slo-Blo type
Min/Max Operating Range (VAC RMS): 90 - 260
47 - 63 Hz
Dimensions With Connectors: 9.33 x 9.50 x 1.725" (23.7 x 24.9 x 4.45 cm)
Without Connectors: 8.5 x 9.5 x 1.725" (21.6 x 24.9 x 4.45 cm)
Weight 3 lb (1.4 kg)
The user manual for the Benchmark DAC2 DX Digital to Analog Audio 500-15300-500 can be downloaded in .pdf format if it did not come with your new monitoring accessories, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other Benchmark users keep a unique electronic library for Benchmark monitoring accessoriess, where you can use our link to download the user manual for the Benchmark DAC2 DX Digital to Analog Audio 500-15300-500.

The user manual lists all of the functions of the Benchmark DAC2 DX Digital to Analog Audio 500-15300-500, all the basic and advanced features and tells you how to use the monitoring accessories. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from Benchmark service.

If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the Benchmark DAC2 DX Digital to Analog Audio 500-15300-500. User manuals are also available on the Benchmark website under Pro Audio - Recording - Monitoring Accessories.



Discussion Question and answer discussion forum concerning user instructions and resolving problems with the Benchmark DAC2 DX Digital to Analog Audio 500-15300-500 - no comments have been made yet - be the first to add a comment

Post new comment/question/response regarding the Benchmark DAC2 DX Digital to Analog Audio 500-15300-500

Fields marked with * must be filled out.
Your name *:
E-mail :
Subject *:
Message text *:
Enter the code *:
(spam block)
"manual"
If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

 

Can't find what you're looking for? Try Google Search!



Current discussions
Most recently discussed products:

Simmons 6-24x50 - Simmons 6-24x50 Predator Varmint Riflescope 656245
Posted by: Stuart Williams
2024-03-26 12:36:48

I have located manual for this on your site but how do I download / print it please ?...
USER MANUAL TSP2 17 BUN - Telmax TSP2-17-BUN Dual 17" Presidential TSP2-17BUN
Posted by: AYO
2024-03-26 10:07:35

MANUAL REQUIRED TO SET UP...
lens servo - Fujinon ESM-15A-SA Digital Servo Unit for Fujinon ESM-15A-SA
Posted by: julia yoko
2024-03-25 22:07:20

i would like to know where the lens manual can be found...
NEPVS14-17 - ITT Night Enforcer PVS-14 Pinnacle Night Vision ITTE-NEPVS14-17
Posted by: Keller Bradshaw
2024-03-25 17:57:35

Hi, I would like a user manual for the NEPVS14-17...
YS 03 above water - Sea & Sea YS-03 Universal Lighting System SS-03541
Posted by: sameer
2024-03-24 22:26:52

Hello Would like to know is it safe to use YS 03 strobe outside water for practice purpose ? Regards...

Uploaded instruction manuals
Upload a link to an instruction manual for a depicted product here:

Link format "http://www.link2manual.com/manual.pdf"

Enter the code: "manual"






PDF-MANUALS.com - Community administered database of instructions for use and PDF User manual
sitemap.txt alx