We recommend checking out our discussion threads on the Bogen Communications LMM1S Microphone/Line Input Module LMM1S,
which address similar problems with connecting and setting up Modules & Cards Bogen Communications.
User manual for the Bogen Communications LMM1S Microphone/Line Input Module LMM1S
The user manual for the Bogen Communications LMM1S Microphone/Line Input Module LMM1S provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Modules & Cards.
The LMM1S Microphone/Line Input Module with Screw Terminal Connector from Bogen Communications is an actively balanced plug-in module designed to pre-amplify microphone inputs to line-level. It is compatible with the Vector mixer/pre-amplifier model VMIX. A mic/line switch sets the input gain range for the intended input device. Jumpers are used to select between 4 levels of priority; the LMM1S can mute lower priority modules and can be muted from higher priority modules plugged into the same VMIX. When using the module with condenser microphones, a jumper can be set for the module to supply 24V phantom power. This input module features bass & treble, gain/trim, and gate threshhold & duration controls.
If you own a Bogen Communications modules & cards and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Bogen Communications LMM1S Microphone/Line Input Module LMM1S in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Bogen Communications LMM1S Microphone/Line Input Module LMM1S:
Specifications
Compatibility
Vector mixer/pre-amplifier VMIX
Gain
Microphone: 18 to 60 dB Line: -2 to 40 dB
Frequency Response
20 Hz - 50 kHz (+0/-3 dB)
S/N
20 Hz - 20 kHz: -76 dBV @ 60 dB gain
Distortion
< 0.01%
Input Impedance
Microphone mode: 2 kΩ Line mode: 15 kΩ
Gate Threshold
2 - 25 mV @ minimum gain
Gate
0.5 - 5 second duration
Priority
4 levels
Tone
± 10 dB @ 100 Hz and 10 kHz
CMRR
> 80 dB @ 1 kHz
Controls
1 x gain 1 x bass 1 x treble 1 x threshold 1 x duration
Connector
1 x 3-position pluggable Euro screw, microphone/line input
The user manual for the Bogen Communications LMM1S Microphone/Line Input Module LMM1S can be downloaded in .pdf
format if it did not come with your new modules & cards, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Bogen Communications users keep a unique electronic library
for Bogen Communications modules & cardss,
where you can use our link to download the user manual for the Bogen Communications LMM1S Microphone/Line Input Module LMM1S.
The user manual lists all of the functions of the Bogen Communications LMM1S Microphone/Line Input Module LMM1S,
all the basic and advanced features and tells you how to use the modules & cards.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Bogen Communications service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Bogen Communications LMM1S Microphone/Line Input Module LMM1S. User manuals are also
available on the Bogen Communications website under Pro Audio - Installation Sound - Modules & Cards.
Question and answer discussion forum concerning user instructions and resolving problems with the Bogen Communications LMM1S Microphone/Line Input Module LMM1S - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17