User manual Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt
Operating instructions and pdf manual for use - Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt User manual, User manual Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt, Cinetics, Three, Axis360, Pro, Motorized, Slider, Pan, Til
User manual for Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt
Overall Rating: 3.0
60% of respondents would recommend this to a friend.
Manufacturer: Cinetics
Basic description and contents of package
Product classification: Professional Video - Tripods, Supports & Rigs - Camera Sliders
Safety instructions
Startup and operation of the camera sliders
Tips for setting up your Cinetics
Settings and expert assistance
Contact Cinetics service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt,
which address similar problems with connecting and setting up Camera Sliders Cinetics.
User manual for the Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt
The user manual for the Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt provides
necessary instructions for the proper use of the product Professional Video - Tripods, Supports & Rigs - Camera Sliders.
The Three Axis360 Pro Motorized Slider, Pan and Tilt from B&H lets you create dynamic video and timelapse photography sequences with fluid and precise motorized slides, pans, and tilts. The kit includes the Axis360 Pro Motorized Slider--complete with a 32" slider, AxisPro Motor, Controller, and Mini Tripod Kit with Ballhead--and two additional Axis360 Motors and Controllers for 3-axis motorized movements.
The system centers around three powerful Axis360 digital stepper motor, which provides smooth or incremental movements, and works with most DLSR, mirrorless, and digital cinema cameras weighing up to 11 pounds. Each Axis360 Motor provides a 1/4"-20 mounting thread and a motor drive with a 1/4"-20 threaded screw for attaching your camera or a mounting bracket. Use one motor to drive the pulley system on the 32" slider, one to pan the camera, and one to tilt the camera.
Each motor is run by the Controller unit, which uses CineMoco software to control movement and synchronized timelapse photos. The Controller works with most video cameras and can sync moves and timelapse photos on most Canon and Nikon DLSR cameras using included cables. A built-in rechargeable battery provides six hours of continuous operation on a single charge or up to 24 hours in power save mode. In video mode, the Controller unit provides speeds up to 110° per second. For timelapse photography, it enables incremental movements as small as 0.03°. Controllers can be controlled individually or daisy chained together with a standard 3.5mm stereo cable for synchronized control.
The 32" aluminum slider provides a platform for side-to-side and forward/backward movements. The sliding platform rolls on eight urethane coated bearings and has adjustable drag. You can move it by hand or with a belt and pulley system driven by one of the Axis360 motors and Controller. An Arca-type quick-release plate for balancing larger cameras or cameras with long lenses To configure your camera and Axis360 motor for tilt movements, a set of quick-release clamps and L Brackets are included. Mount this configuration to the slider, or to the included mini tripod kit.
Please see the links below for more information on the components of this kit.
If you own a Cinetics camera sliders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt:
Specifications
Cinetics Axis360 Pro Motorized Motion Control System and Slider
Load Capacity
Slides 11 lb (5 kg) vertically or horizontally up to 1.4 cm/s
Travel Speed
Variable speeds up to 2.4 cm/s or 110°/s, and accurate to 0.1°
Battery
Built-in rechargeable battery
Battery Runtime
6 hours in continuous mode 24 hours in power saving mode
Video functions do not require a camera cable, and many cameras support time-lapse with a built-in intervalometer (no camera cable necessary). The Controller controls the camera shutter with included camera cables for many Canon and Nikon cameras, and cables are available optionally for a variety of other cameras.
Software Compatibility
Compatible with Dragonframe stop motion animation software
Rail Length
32" (81.3 cm); breaks down into four 16" (40.6 cm) sections
How To Set Up Axis360 Controller for Pan, Tilt, and Slide
How To Sync Multiple Axis360 Controllers
Product Demo 1
Setting Up
The user manual for the Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt can be downloaded in .pdf
format if it did not come with your new camera sliders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Cinetics users keep a unique electronic library
for Cinetics camera sliderss,
where you can use our link to download the user manual for the Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt.
The user manual lists all of the functions of the Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt,
all the basic and advanced features and tells you how to use the camera sliders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Cinetics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt. User manuals are also
available on the Cinetics website under Professional Video - Tripods, Supports & Rigs - Camera Sliders.
Question and answer discussion forum concerning user instructions and resolving problems with the Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt - no comments have been made yet - be the first to add a comment