Operating instructions and pdf manual for use - Cisco SPA122 ATA with Router SPA122 User manual, User manual Cisco SPA122 ATA with Router SPA122, Cisco, SPA122, ATA, with, Router, SPA122, Video
User manual for Cisco SPA122 ATA with Router SPA122
Overall Rating: 4.5
90% of respondents would recommend this to a friend.
Manufacturer: Cisco
Basic description and contents of package
Product classification: Computers & Solutions - Networking - VoIP Accessories
Safety instructions
Startup and operation of the voip accessories
Tips for setting up your Cisco
Settings and expert assistance
Contact Cisco service
Troubleshooting
Warranty information
Price: 59 USD
We recommend checking out our discussion threads on the Cisco SPA122 ATA with Router SPA122,
which address similar problems with connecting and setting up VoIP Accessories Cisco.
User manual for the Cisco SPA122 ATA with Router SPA122
The user manual for the Cisco SPA122 ATA with Router SPA122 provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - VoIP Accessories.
The SPA122 ATA with Router from Cisco effectively combines VoIP services with an internal router for LAN connectivity. The SPA122 ATA comes equipped with two telephone ports allowing for either telephone or fax machine connectivity along with the integrated Ethernet port allowing for high speed Internet access. With its sleek design this router is an effective solution to a variety of settings including residential, home-office, and small business VoIP service offerings, including full-featured hosted or open source IP IBX environments.
If you own a Cisco voip accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Cisco SPA122 ATA with Router SPA122 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Cisco SPA122 ATA with Router SPA122:
Specifications
Data Networking
MAC address (IEEE 802.3) IPv4 (RFC 791) upgradeable to IPv6 (RFC 1883) Address Resolution Protocol (ARP) Domain Name System (DNS) A record (RFC 1706) and SRV record (RFC 2782) Dynamic Host Configuration Protocol (DHCP) server and client (RFC 2131) DHCP client reservation DHCP Options 159 and 160 Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516) Internet Control Message Protocol (ICMP) (RFC 792) TCP (RFC 793) User Datagram Protocol (UDP) (RFC 768) Real Time Protocol (RTP) (RFC 1889) (RFC 1890) Real Time Control Protocol (RTCP) (RFC 1889) Differentiated Services (DiffServ) (RFC 2475) and type of service (ToS) (RFC 791/1349) VLAN tagging (IEEE 802.1p) Simple Network Time Protocol (SNTP) (RFC 2030) Upload data rate limiting: static and automatic QoS voice packet prioritization over other packet types MAC address cloning Port forwarding SIP channels support both UDP and TCP transport VPN pass-through with IP Security encapsulating security payload (IPsec ESP), Point-to-Point Tunneling Protocol (PPTP), and Layer 2 Tunneling Protocol (L2TP)
Physical Interfaces
1 x WAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3) 1 x LAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3) 2 x RJ-11 FXS phone ports for analog circuit telephone device (tip and ring) 1 x Reset button
Voice Gateway
SIPv2 (RFC 3261, 3262, 3263, and 3264) SIP proxy redundancy: dynamic through use of DNS SRV A records Reregistration with primary SIP proxy server SIP support in Network Address Translation (NAT) networks (including Serial Tunnel [STUN]) Highly secure (encrypted) calling using Secure RTP (SRTP) Codec name assignment G.711 (A-law and μ-law) G.726 (32 kbps) G.729 A Dynamic payload Adjustable audio frames per packet Dual-tone multifrequency (DTMF): in-band and out-of-band (RFC 2833) (SIP information)
Voice Features
QoS (Ethernet port upstream bandwidth control) Independent configurable dial plans with interdigit timers and IP dialing (1 per port) Call progress tone generation Jitter buffer: Adaptive Frame loss concealment Full-duplex audio Echo cancellation (G.165 and G.168) Voice activity detection (VAD) Silence suppression Comfort noise generation (CNG) Attenuation and gain adjustments Flash hook timer Message waiting indicator (MWI) tones Visual messaging waiting indicator (VMWI) using frequency shift keying (FSK) Polarity control Hook flash event signaling Caller ID generation (name and number): Bellcore, DTMF, and European Telecommunications Standards Institute (ETSI) Streaming audio server: Up to 10 sessions Music on hold Call waiting, call waiting and caller ID Caller ID with name and number Caller ID blocking Selective and anonymous call rejection Call forwarding: No answer, busy, and all Do not disturb Call transfer, call return, and call back on busy Three-way conference calling with local mixing Per-call authentication and associated routing Call blocking with toll restriction Distinctive ringing: Calling and called number Off-hook warning tone Advanced inbound and outbound call routing Hotline and warmline calling Long silence (configurable time setting) silence threshold Disconnect tone (for example, reorder tone) Configurable ring frequency Ring validation time setting Tip and ring voltage adjustment setting Ring indication delay setting
Fax Capability
Fax tone detection pass-through Fax pass-through using G.711 Real-time fax over IP using T.38 fax relay (T.38 support is dependent on fax machine and network and transport resilience)
Security
Password-protected system reset to factory default Password-protected administrator and user access authority Provisioning, configuration, and authentication HTTPS with factory-installed client certificate HTTP digest: Encrypted authentication using MD5 (RFC 1321) Up to 256-bit Advanced Encryption Standard (AES) encryption SIP Transport Layer Security (TLS)
Administration
Web browser administration and configuration using integral web server Telephone keypad configuration with interactive voice prompts Automated provisioning and upgrade using HTTPS, HTTP, and Trivial File Transfer Protocol (TFTP) TR-069 Asynchronous notification of upgrade availability using Notify Nonintrusive, in-service upgrades Report generation and event logging Statistics in Bye message Debug and syslog server records: Per-line configurable web browser Ping and traceroute diagnostics Configuration management: Backup and restore Support for Bonjour
Subscriber Line Interface Circuit
Ring voltage: 40-90 Vpk configurable Ring frequency: 20-25 Hz Ring waveform: Trapezoidal Maximum ringer load: 5 ringer equivalence numbers (RENs) On-hook voltage (tip and ring): -46 to -56V Off-hook current: 18-25 mA Terminating impedance: 600 ohm resistive or 270 ohm + 750 ohm 150 nF complex impedance Frequency response: 300-3400 Hz Return loss (600 ohm, 300-3400 Hz): up to 20 dB Insertion loss (1 Vrms at 1 kHz): 3-4 dB Total harmonic distortion (THD) (350 mV peak at 300 Hz): up to 3% Idle channel noise: 72 dB (typical) Longitudinal balance: 55 dB (typical) Off-hook threshold (line seizure): Rdc < 1000 ohm On-hook threshold (line release): Rdc >10000 ohm Rdc DC supervisory range: Rdc > 450 ohm
Regulatory Compliance
FCC (Part 15 Class B), CE, ICES-003, A-Tick certification, Restriction of Hazardous Substances (RoHS), and UL
Power Supply
DC input voltage: 5V DC at 2.0A maximum Power consumption: 5W Switching type (100-240V) automatic Power adapter: 100-240V and 50-60 Hz (26-34 VA) AC input, with 1.8m cord
Indicator Lights
Phone 1, phone 2, Internet, and power
Environmental Requirements
Operating Temperature: 32-113°F (0-45°C) Storage Temperature: -77-158°F (-25-70°C) Operating Humidity: 10 to 90% non condensing Storage Humidity: 10-90% non condensing
The user manual for the Cisco SPA122 ATA with Router SPA122 can be downloaded in .pdf
format if it did not come with your new voip accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Cisco users keep a unique electronic library
for Cisco voip accessoriess,
where you can use our link to download the user manual for the Cisco SPA122 ATA with Router SPA122.
The user manual lists all of the functions of the Cisco SPA122 ATA with Router SPA122,
all the basic and advanced features and tells you how to use the voip accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Cisco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Cisco SPA122 ATA with Router SPA122. User manuals are also
available on the Cisco website under Computers & Solutions - Networking - VoIP Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Cisco SPA122 ATA with Router SPA122 - no comments have been made yet - be the first to add a comment
Please, send me the user manual for Ibanez M510E-BS Mandolin in PDF. Thak You!...Vortex 8x42 HD Talon binocular Manual - Vortex Talon HD 8x42 Roof Prism Binocular TLN-4208-HD Posted by: Pierre Gagnon 2024-04-12 23:06:37
Would like your PDF manual.
Thanks for this convenience.
Fantastic binocular....