|
User manual for Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC
- Manufacturer: Comtek
- Basic description and contents of package
- Product classification: A/V Presentation - Assistive Listening - Assistive Listening Systems
- Safety instructions
- Startup and operation of the assistive listening systems
- Tips for setting up your Comtek
- Settings and expert assistance
- Contact Comtek service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC,
which address similar problems with connecting and setting up Assistive Listening Systems Comtek.
|
User manual for the Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC
The user manual for the Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC provides
necessary instructions for the proper use of the product A/V Presentation - Assistive Listening - Assistive Listening Systems.
The AT-216 Wireless Auditory Assistance Kit with Enviro-Mic Receiver from Comtek includes a PR-216 personal wireless receiver with Enviro-Mic option, an M-216 wireless transmitter, a CM-183RT omnidirectional lapel microphone and clip, an NTC-102 neckloop transductor, and an SM-N earphone assembly. It also features a TM-10 conference table microphone adapter, an FWA-216 flexible specialty antenna, a CB-36ST attenuator adapter cord, two BC-216 belt clips, two NH0-200 9-volt rechargeable batteries, an NBC 9-3-2 battery charger, and a C-216 carrying case.
The kit is designed to transmit both teacher's dialog and environmental sounds to your personal hearing aids or included earphone assembly for assistive listening purposes.
|
If you own a Comtek assistive listening systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC:
Connectors | 1x 1/8" (3.5 mm) Auxiliary Line Input (Also Used for Battery Charging) 1x 1/10" (2.5 mm) Mic/Antenna Input | Frequency Response | 80 Hz to 10 kHz | Distortion | Less than 1% @ 80% Modulation | Modulation | 5 kHz Deviation (Channels 1 to 40, Non-Companded) 10 kHz Deviation (Channels 41 to 60, Companded) | RF Output | 10 mW to the antenna system | Operating Frequency | 57 Synthesized Channels in the 216 to 217MHz LPRS Band Under FCC Part 95 | Emissions | Out of Band: Better than 45 dB below carrier | Current Drain | 17 mA constant current | Battery | 9 V Alkaline (Eveready 522 or Equivalent) - Up to 35 Hours 9 V NiMH Rechargeable - Up to 15 Hours | Dimensions (WxHxD) | 1.16 x 2.5 x 3.25" (27 x 57 x 83 mm) | Weight | 4 oz (110 g) | Audio Output | Headset Output: 16 dBu (low impedance) 1x 1/8" (3.5 mm) Stereo/Mono Connector | Controls | 1x Power On/Off switch 1x Volume control (50 dB range) 1x 99-Position rotary channel selector switches | Frequency Response | 80 Hz to 12 kHz | Total Harmonic Distortion | Less than 1% (80% modulation) | RF Frequency Range | 216 to 217 MHz | Frequency Stability | 0.002% Frequency Synthesized Crystal Controlled | RF Sensitivity | 0.5 uV for 12 dB SINAD | Adjacent Channel Isolation | 65 dB 50 kHz Off-Channel Rejection | Spurious Rejection | 60 dB (Image Excluded) | Ultimate Quieting | Better than 95 dB Companded Channels | Deviation Acceptance | Up to 10 kHz | Antenna | Integral with output cable | Current Drain | 15 mA (Nominal) | Power Requirements | 9 V Alkaline Battery Rechargeable Nickel Metal Hydride | Dimensions (WxHxD) | 1.16 x 2.5 x 3.25" (27 x 57 x 83 mm) | Type | Lapel Mic | Polar Pattern | Omnidirectional | Type | Conference Table Microphone Adapter | Frequency Response | 100 Hz to 10 kHz | Polar Pattern | Hemispherical Over Boundary | Output Impedance | 1 kΩ (Nominal) | Sensitivity | -28 dB @ 1 kHz (Reference: 1 V) | Output Noise | Equivalent: 23.5 dB (A-weighted) | Maximum SPL | 128 dB (@ 10 kHz load) | Signal to Noise Ratio | 70.5 dB | Dimensions (DxH) | 2 x 0.640" (5.08 x 1.625 cm) | Weight | 1.33 oz (38 g) (With Microphone) | Package Weight | 3.05 lb | Box Dimensions (LxWxH) | 10.1 x 8.9 x 3.4" | |
The user manual for the Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC can be downloaded in .pdf
format if it did not come with your new assistive listening systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Comtek users keep a unique electronic library
for Comtek assistive listening systemss,
where you can use our link to download the user manual for the Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC.
The user manual lists all of the functions of the Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC,
all the basic and advanced features and tells you how to use the assistive listening systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Comtek service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC. User manuals are also
available on the Comtek website under A/V Presentation - Assistive Listening - Assistive Listening Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Comtek AT-216 Auditory Assistance Kit AT-216 ENVIRO-MIC
|
|
|
|
|