|
User manual for Crest Audio CM 2204 Professional Installation Amplifier 01000540
- Manufacturer: Crest Audio
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Power Amplifiers
- Safety instructions
- Startup and operation of the power amplifiers
- Tips for setting up your Crest Audio
- Settings and expert assistance
- Contact Crest Audio service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Crest Audio CM 2204 Professional Installation Amplifier 01000540,
which address similar problems with connecting and setting up Power Amplifiers Crest Audio.
|
User manual for the Crest Audio CM 2204 Professional Installation Amplifier 01000540
The user manual for the Crest Audio CM 2204 Professional Installation Amplifier 01000540 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The 2RU CM 2204 Professional Installation Amplifier from Crest Audio drives 4 independent channels into low impedance or 70V loads. Each channel can drive 4Ω, and up to 4 channels are allowed. A switch allows selection of 0.775 Volt sensitivity or x40 gain. A high-pass filter is selectable per channel. The on-board protection suite includes Crest Audio's proprietary ACL (Automatic Clip Limiting) circuitry, which prevents the amplifier from sending potentially damaging clipped signals to the loudspeakers. It also features 4 Clip, 4 Signal, 4 Protect, and Active safeguards for each channel, all referenced on the front panel with LED indicators along with the power indicator. The Instantaneous Gain Modulation (IGM) circuit adjusts the channel gain to a safe level. The featured AUTORAMP signal control attenuates the signal while the speakers are disconnected. This unit is cooled by a variable speed fan with front-to-side airflow.
|
If you own a Crest Audio power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Crest Audio CM 2204 Professional Installation Amplifier 01000540 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Crest Audio CM 2204 Professional Installation Amplifier 01000540:
Power Rating | Bridge 8 Ω: 320 W Bridge 140 V: 440 W 1 channel x 4 Ω: 160 W 1 channel x 8 Ω: 245 W 70.7 V, 24 Ω: 220 W 4 channel x 4 Ω: 155 W 4 channel x 8 Ω: 240 W 4 channel x 70.7 V: 180 W | Damping Factor | >200:1 @ 20 Hz - 1 kHz @ 8 Ω | Input Sensitivity | 0.775 V (0 dBu setting) | Input Impedance | Balanced: 20 kΩ Unbalanced: 10 kΩ | Minimum Load Impedance | 4 Ω | Voltage Gain | x40 or 0 dBu (x90) | Crosstalk | > -60 dB @ 1 kHz at rated power @ 8 Ω | Hum and Noise | > -97 dB, below rated output, 22 Hz - 22 kHz | Frequency Response | 5 Hz - 20 kHz, -1 dB @ 1 W (8 Ω load) | Total Harmonic Distortion (THD) | <0.02% @ rated power, 1 kHz (70.7 V) | Input CMRR | > -60 dB @ 1 kHz | Connectors | 4 x 3-position Euro-style detachable terminal block, input (1 per channel) 4 x 2-position Euro-style detachable terminal block, output (1 per channel) 1 x 3-pin IEC, power input | Controls | 4 x Channel input signal attenuator (1 per channel) 4 x Channel HPF selection switch (1 per channel) 4 x Channel gain selection switch (1 per channel) 1 x On/Off switch | LED Indicators | 4 x Clip (1 per channel) 4 x Signal (1 per channel) 4 x Protect (1 per channel) 1 x Active | Cooling | Variable speed, front panel mounted, front-to-side airflow | Current Draw | 2.8 A @ 1/8 power 4.4 A @ 1/3 power < 1 A @ idle | Emission | Thermal @ 1/8 Power: 473 BTU/hour Thermal @ 1/3 Power: 621 BTU/hour | Class | D | Power Requirements | 120 VAC 60 Hz (AB), 230 VAC 50 Hz (DV) | Dimensions | 3.5 x 19.0 x 17.05" (8.8 x 48.3 x 43.3 cm) | Weight | 34.0 lb (15.4 kg) | |
The user manual for the Crest Audio CM 2204 Professional Installation Amplifier 01000540 can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Crest Audio users keep a unique electronic library
for Crest Audio power amplifierss,
where you can use our link to download the user manual for the Crest Audio CM 2204 Professional Installation Amplifier 01000540.
The user manual lists all of the functions of the Crest Audio CM 2204 Professional Installation Amplifier 01000540,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Crest Audio service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Crest Audio CM 2204 Professional Installation Amplifier 01000540. User manuals are also
available on the Crest Audio website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Crest Audio CM 2204 Professional Installation Amplifier 01000540 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Crest Audio CM 2204 Professional Installation Amplifier 01000540
|
|
|
|
|