User manual for Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V
- Manufacturer: Crown Audio
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - 70-Volt Amplifiers
- Safety instructions
- Startup and operation of the 70-volt amplifiers
- Tips for setting up your Crown Audio
- Settings and expert assistance
- Contact Crown Audio service
- Warranty information
We recommend checking out our discussion threads on the Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V,
which address similar problems with connecting and setting up 70-Volt Amplifiers Crown Audio.
User manual for the Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V
The user manual for the Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - 70-Volt Amplifiers.
The Crown CTs-600 is a two-channel power amplifier housed in a 2RU rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters, and an advanced level of well designed overload protection circuitry.
If you own a Crown Audio 70-volt amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V:
| Power Rating || 300W @ 8 Ohms, Dual (Per Channel) |
| Damping Factor || 10Hz - 100Hz : >3000 |
| Input Sensitivity || Switchable: |
1.4V (8/4 Ohms)
2.46V (4 Ohm Load)
3.47V (8 Ohm Load)
| Input Impedance || 10 kOhms balanced (nominal), 5 kOhms unbalanced (nominal) |
| Gain || 35:1 (31dB) |
| Frequency Response || 20Hz - 20kHz ±0.25dB @ 1W |
| Signal-to-Noise Ratio || 105dB A-Weighted, below rated power (20Hz - 20kHz) |
| Total Harmonic Distortion (THD) || < 0.1%, at full rated power (20Hz - 20kHz) |
| Input Connections || 2 x Balanced 3-Pin Terminal Block Connectors (one per channel) |
| Output Connectors || 1 x 4-Pole Terminal Strip (Ch 1, Ch 2) |
| Controls Front Panel || 1 x Power Switch |
| Controls (Rear) || 1 x Reset Switch |
1 x Rotary Channel Level Control (per channel)
1 x 2-Position Operation Mode Switch
1 x Highpass Filter Switch (per channel)
1 x "Y" Input Switch
1 x Interior 3-Position Input Sensitivity Switch (per channel)
| Indicators || Front Panel: |
1 x Yellow LED Bridge Mode Indicator
1 x Green LED Ready Indicator
3 x Green LED Signal Indicators (per channel)
1 x Red LED Clip Indicator (per channel)
1 x Red LED Thermal Indicator (per channel)
1 x Red LED Fault Indicator
1 x Yellow LED Data Indicator (per channel)
1 x Blue LED Power Indicator
Back Panel: No Indicators on Back Panel
| Cooling || Continuously Variable Speed Fans |
Ventilation Grille (Front)
Cooling Vents (Back)
Front-to-Rear forced airflow
| Power Consumption || 24W (230VAC Mains) |
| Dimensions || 19 x 3.5 x 14.25" (483 x 89 x 362mm) |
| Weight || 22.8 lbs (10.3kg) |
| Specialties || Variable Speed Fan Cooling |
Thermal Level Control
JTS Limiting Circuitry
The user manual for the Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V can be downloaded in .pdf
format if it did not come with your new 70-volt amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Crown Audio users keep a unique electronic library
for Crown Audio 70-volt amplifierss,
where you can use our link to download the user manual for the Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V.
The user manual lists all of the functions of the Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V,
all the basic and advanced features and tells you how to use the 70-volt amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Crown Audio service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V. User manuals are also
available on the Crown Audio website under Pro Audio - Installation Sound - 70-Volt Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Crown Audio CTs-600 Two-Channel Power Amplifier CTS600230V
Can't find what you're looking for? Try Google Search!|
|Uploaded instruction manuals