|
User manual for Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ
- Manufacturer: Cubix
- Basic description and contents of package
- Product classification: Computers & Solutions - Computer Components - Expansion Chassis
- Safety instructions
- Startup and operation of the expansion chassis
- Tips for setting up your Cubix
- Settings and expert assistance
- Contact Cubix service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ,
which address similar problems with connecting and setting up Expansion Chassis Cubix.
|
User manual for the Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ
The user manual for the Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ provides
necessary instructions for the proper use of the product Computers & Solutions - Computer Components - Expansion Chassis.
The Xpander Rackmount 2 Gen 3 PCIe Expansion Enclosure from Cubix enables connection of graphics or other controllers to a host computer. The host must have a PCIe Gen 3.0 x16 expansion slot available for the Host Interface Controller (HIC). This Rackmount 2 provides two PCIe Gen 3.0 x16 slots and connects to an HIC in one host computer, providing the full, theoretical connection transfer rate of 128.0 Gb/s.
|
If you own a Cubix expansion chassis and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ:
Expansion Slots | 2 x PCIe Gen 3.0 x16 mechanical/electrical | Form-Factor Support | 2 x Double-wide, full-length, full-height controllers/adapters | Connecting Cable | External PCIe x16, 136-pin cable | Length | Standard: 6.6' (2.0 m) | Connector Duty Cycle | 250 mating cycles maximum per connector | PCIe Gen 3.0 Slot | 5.0 Gb/s x16 = 128 Gb/s data transfer rate (theoretical) | PCIe Gen 2.0 Slot | 5.0 Gb/s x16 = 80 Gb/s data transfer rate (theoretical) | PCIe Gen 1.0 Slot | 2.5 Gb/s x16 = 40 Gb/s data transfer rate (theoretical) | Front Panel LCD | Main Menu: Left button Sub Menu: Right button | Cubix Corporation | MIB assembly and revision Management firmware revision | Power Supply Status | Standard main power | Temperature Status | 3 x Sensor readouts in degrees Centigrade | Status | Fan status, voltage percent speed | PCIe Link Status | x16 Cable connected 8.0 Gb/s x16 link speed | x16 Cable | Connected or not connected status | Rear Panel | 1 x Power input receptacle 1 x PCIe x16 cable receptacle | Cooling Fans | 2 x fans at 112 cfm maximum | Fan Speed | Minimum: 50% (6 V) at 77°F (25°C) or less Maximum: 100% (12 V) at 122°F (50°C) or more Range: 77°F (25°C) to 122°F (50°C) in gradual, linear progression | Normal Operation | D1 LED: 1 x Pulse of 10 ms on for every 700 ms off | Error Indication | D1 LED: 4 x Pulses of 10 ms on for every 700 ms off | Error Conditions | No fan tachometer or no temperature sensor connected | Power Supply | Single-phase, auto-ranging, 100 - 240 VAC, 10 - 5 A, 50/60 Hz Total output power is not to exceed 700 W | Operating Temperature | 32 to 86°F (0 to 30°C) | Humidity | 5 to 80% (non-condensing) | Dimensions (WxHxD) | 19.0 x 3.5 x 16.0" (48.3 x 8.9 x 40.6 cm) | Weight | 18.5 lb (8.4 kg) | |
The user manual for the Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ can be downloaded in .pdf
format if it did not come with your new expansion chassis, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Cubix users keep a unique electronic library
for Cubix expansion chassiss,
where you can use our link to download the user manual for the Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ.
The user manual lists all of the functions of the Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ,
all the basic and advanced features and tells you how to use the expansion chassis.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Cubix service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ. User manuals are also
available on the Cubix website under Computers & Solutions - Computer Components - Expansion Chassis.
Question and answer discussion forum concerning user instructions and resolving problems with the Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Cubix Xpander Rackmount 2 Gen 3 PCIe Expansion XPRM-G3-2VIZ
|
|
|
|
|