|
User manual for DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S
- Manufacturer: DATAPATH
- Basic description and contents of package
- Product classification: A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories
- Safety instructions
- Startup and operation of the multi viewer accessories
- Tips for setting up your DATAPATH
- Settings and expert assistance
- Contact DATAPATH service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S,
which address similar problems with connecting and setting up Multi Viewer Accessories DATAPATH.
|
User manual for the DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S
The user manual for the DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S provides
necessary instructions for the proper use of the product A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories.
The VisionRGB-E2S DVI/RGB/HD Video Capture Card from DATAPATH is a stand-alone PCI Express x4 plug-in video capture card, with two complete capture channels supporting up to 1920x1200 DVI or 2048x1536 Analog resolution, and a 650MB/s transfer bus bandwidth. The card captures the Analog/ DVI data and triple buffers it into on-board storage. This data is then copied using DMA to the host system for display, storage or streaming. When a Datapath graphics card is used, the VisionRGB-E2S transfers the data directly to the graphics card, thereby increasing performance. The VisionRGB-E2S sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilizes the hardware and increases performance.
When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E2S sends the data to system memory or direct to the graphics card, dependent on the software used for display.
The VisionRGB-E2S video capture card is supplied with a software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E2S application to automatically detect the video source format and display the captured video in a window on your desktop.
The VisionRGB-E2S is a suitable solution for applications that require the capture of analog or DVI sources in real time, such as viewing Analog or DVI sources from PCs, MACs, industrial/medical equipment, cameras and other video equipment, streaming video applications, and video wall controllers. For streaming applications, the VisionRGB-E2S can be used with Windows Media Encoder to compress and stream captures video. To replay the video, use Windows Media Player. Any application compatible with Windows Direct-Show technology can use the VisionRGB-E2S video capture card due to its built in WDM support.
|
If you own a DATAPATH multi viewer accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S:
Card Format | PCI Express x4 half size card PCI Express bus master with scatter gather DMA providing | Connectors | 2 x DVI-I, video input | Sample Rate | 170 MHz RGB analogue or 165 MHz DVI Analogue modes up to 340 MHz pixel clock can be captured using dual-pass sampling | Data Rate | 650 MB/s, maximum | Video Sampling | RGB: 24-bit per pixel, 8-8-8 format | Video Capture | Memory: 64 MB (updated in real-time), triple buffered | Modes | RGB Analogue: 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 2048 x 1536, and custom modes DVI Single Link: 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 1920 x 1200, and custom modes HD: 1080p, 1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector | Input Modes | Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal | Pixel Format | RGB: 5-5-5, 5-6-5, or 8-8-8 (24-bit, 32-bit) YUV: 4:2:2, UYVY, YUY2, YVYU | Update Rate | User defined, capture frame rate will match the source providing maximum data rate (650 MB/s) is not exceeded Triple-buffered to eliminate tearing artifacts | Video Formats | RGB Analogue plus HSync and VSync (5 wire) RGB Analogue with Composite Sync (4 wire) RGB Analogue with Sync on Green/ YPbPr (3 wire) DVI Single Link | Operating System Support | Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows Server 2012, Windows 7 (x86 and x64 operating systems), Windows 8 and Linux support | Power Requirements | Maximum current at 12 V - 1.2 A Maximum current at 3.3 V - 0.25 A Maximum power 15 W | Temperature | Operating: 32 to 95°F (0 to 35°C) Storage: -4 to 158°F (-20 to 70°C) | Relative Humidity | 5 - 90%, non-condensing | Analog Input | Range: 0.5 Vp-p minimum, 1.0 Vp-p maximum | Input | Offset: ±2 V 75 ohms, terminated | Sync | Hsync: 15 - 110 kHz Vsync: No hardware limits, typically 25 - 200 Hz for real signals | Separate Sync | Polarity: Positive or negative (Separate H & V sync, Composite sync) On Green Polarity: Negative | Dimensions | 4.3 x 6.7" (110 x 170 mm) | |
The user manual for the DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S can be downloaded in .pdf
format if it did not come with your new multi viewer accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other DATAPATH users keep a unique electronic library
for DATAPATH multi viewer accessoriess,
where you can use our link to download the user manual for the DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S.
The user manual lists all of the functions of the DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S,
all the basic and advanced features and tells you how to use the multi viewer accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from DATAPATH service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S. User manuals are also
available on the DATAPATH website under A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the DATAPATH VisionRGB-E2S DVI/RGB/HD Video Capture VISIONRGB-E2S
|
|
|
|
|