User manual DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S
Operating instructions and pdf manual for use - DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S User manual, User manual DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S, DATAPATH, VisionSD4, 1S, RGB/DVI/HD, SD, Video, VISIONSD
User manual for DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S
Manufacturer: DATAPATH
Basic description and contents of package
Product classification: A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories
Safety instructions
Startup and operation of the multi viewer accessories
Tips for setting up your DATAPATH
Settings and expert assistance
Contact DATAPATH service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S,
which address similar problems with connecting and setting up Multi Viewer Accessories DATAPATH.
User manual for the DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S
The user manual for the DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S provides
necessary instructions for the proper use of the product A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories.
The VisionSD4+1S RGB/DVI/HD and SD Video Capture Card from DATAPATH is a video capture card with five complete video capture channels supporting a single channel for up to 1920x1080 DVI or 2048x1536 Analog resolution, plus four SD Analog capture channels, and provides a maximum data rate of 650 MB/s. The card captures the Analog/DVI data and triple buffers it into on-board storage. This data is then copied using DMA to the host system for display, storage or streaming. When a Datapath graphics card is used, the VisionSD4+1S transfers the data directly to the graphics card thereby increasing performance.
When the RGB/DVI data is displayed on a non-Datapath graphics card, the VisionSD4+1S sends the data to system memory or direct to the graphics card, dependent on the software used for display.
The VisionSD4+1S video capture card is supplied with a software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI, Analog, or video source into the card, run the VisionSD4+1S application to automatically detect the video source format and display the captured video in a window on your desktop.
The VisionSD4+1S is a suitable solution for applications that require the capture of an RGB/DVI source simultaneously with up to four SD video sources, such as viewing Analog or DVI sources from PCs, MACs, industrial/medical equipment, cameras and other video equipment, streaming video applications, and video wall controllers. For streaming applications, the VisionSD4+1s can be used with Windows Media Encoder to compress and stream captured video. To replay the video, use Windows Media Player. Any application compatible with Windows DirectShow technology can use the VisionSD4+1s due to its built-in WDM support.
If you own a DATAPATH multi viewer accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S:
Specifications
Card Format
PCI Express x4 plug-in card PCI Express bus master with scatter gather DMA
Connectors
1 x DVI-I, video input 1 x Sub-D, SD video input
Data Rate
650 MB/s, maximum
Sample Rate
170 MHz RGB analogue or 165 MHz DVI Analog modes up to 340 MHz pixel clock can be captured using dual-pass sampling
Video Sampling
RGB: 24 bits per pixel, 8-8-8 format Video: 16 bits per pixel, YUV format
Capture Resolution
SD: 720 x 576 x 16-bit, maximum RGB Analog: 2048 x 1536 x 24-bit, maximum DVI: 1920 x 1200 x 24-bit, maximum
Maximum Cards Supported
32 (128 SD and 32 DVI-I capture channels)
Video Capture
Memory: 64 MB, triple buffered
Modes
RGB Analog: 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 2048 x 1536, custom modes DVI Single-Link: 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 1920 x 1200, custom modes HD: 1080p, 1080i, 720p, 576p, 576i, 480p and 480i using DVI/component or DVI/HDMI adapters
Input Detection
Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal
Pixel Format
RGB: 5-5-5, 5-6-5, or 8-8-8 (24-bit, 32-bit)
Update Rate
User defined, captured frame rate will match the source providing maximum data rate (650 MB/s) is not exceeded
Video Formats
Analog RGB, plus HSync and VSync (5 wire)
Operating System Support
Windows XP, Windows Vista, Windows Server 2003, Windows Server 2008, Windows 7, Windows 8, and Linux
Power Requirements
Maximum current at 3.3 V - 0.25 A Maximum current at 12 V - 1.2 A Maximum power 15 W
Temperature
Operating: 32 to 96°F (0 to 35°C) Storage: -4 to 158°F (-20 to 70°C)
Relative Humidity
5 - 90%, non-condensing
Dimensions
4.3 x 8.0" (110 x 204 mm)
The user manual for the DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S can be downloaded in .pdf
format if it did not come with your new multi viewer accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other DATAPATH users keep a unique electronic library
for DATAPATH multi viewer accessoriess,
where you can use our link to download the user manual for the DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S.
The user manual lists all of the functions of the DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S,
all the basic and advanced features and tells you how to use the multi viewer accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from DATAPATH service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S. User manuals are also
available on the DATAPATH website under A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the DATAPATH VisionSD4 1S RGB/DVI/HD and SD Video VISIONSD4 1S - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17