|
User manual for dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24
- Manufacturer: dB Technologies
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Crossovers
- Safety instructions
- Startup and operation of the crossovers
- Tips for setting up your dB Technologies
- Settings and expert assistance
- Contact dB Technologies service
- Troubleshooting
- Warranty information
- Price: 299 USD
|
We recommend checking out our discussion threads on the dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24,
which address similar problems with connecting and setting up Crossovers dB Technologies.
|
User manual for the dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24
The user manual for the dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Crossovers.
The ASX 24 2-Way/3-Way Stereo with 4-Way Mono Active Crossover from dB Technologies features a 2x XLR-input with 25 Hz high-pass filter switch and a 6x XLR-output with high quality 24 dB/ octave slope. It has an adjustable delay time up to 2ms for outputs. The LOW SUM function conveys the whole LF range of L&R channels to a mono sub out.
|
If you own a dB Technologies crossovers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24:
Connectors | XLR balanced/unbalanced RF filtered | Impedance | Balanced: 50 kOhms Unbalanced: 25 kOhms | Input Level | Maximum: 22 dB typical (balanced/unbalanced) | CMRR | >40 dB typically >55 dB @ 1 kHz | Connectors | XLR balanced/unbalanced RF filtered | Impedance | Balanced: 60 ohms Unbalanced: 30 ohms | Maximum Input Level | >+20 dB (Balanced/unbalanced) | Bandwidth | 20 Hz to 20 kHz, +/- 0.5 dB | Frequency Response | <5 hz to>90 Hz, +/- 0.3 dB | Signal to Noise | Reference: 4 dBU, 20 Hz to 20 kHz, unweighted | Output | Stereo: Low: >93 dBu Mid: >95 dBu High: >90 dB Mono: Low: >93 dBu Low to Mid: >94 dB Mid to High: >94 dBu High: >88 dB | Dynamic Range | >106 dB unweight | THD & Noise | Stereo: Limiter Off: <0.04%
Mono: Limiter On: <0.5% | Crosstalk | High to Low: <93 dBu High to Mid: <94 dBu Mid to Low: <95 dBu High to High-Mid: <95 dBu High to High-Mid: <95 dBu HIgh-Mid to Low-Mid: <95 dBu Low-Mid to Low: <92 dBu | Filter Type | Linkwitz-Riley, 24 dB/octave | Frequency | Stereo Mode (2 or 3-Way): x1 Low/High or Low/Mid: 44 Hz to 930 Hz Mid/High: 440 Hz to 9.3 kHz Mono Mode (4-Way): x1 Low/Low-Mid: 44 Hz to 930 Hz Low-Mid/High-Mid: 440 Hz to 9.3 kHz High-Mid/High: 440 Hz to 9.3 kHz Stereo Mode (2 or 3-Way): x10 Low/High or Low/Mid: 440 Hz to 9.3 kHz Mono Mode (4-Way): x10 Low/Low to Mid: 440 Hz to 9.3 kHz | Front Panel | Low Cut: Activates 25 Hz Butterworth, 12 dB/octave High-pass filter | Mute | Mutes the individual output | Phase Invert | Inverts the phase at individual ouput | Horn | CD: Corrects CD horn frequency response above 3.5 kHz | Limiter | Activates the limiter function for all outputs | Rear Panel Controls | Crossover frequency: Multiplies crossover frequency range by 10 Mode: Selects stereo/mono, selects 2/3/4 way operation LF Sum: Selects normal stereo or normal summed low frequency operation | Inputs | Controls the input gain (+/-12 dB) | Crossover Frequency | Controls the crossover frequency | Delay | Controls the delay at low output (0 to 2 ms) | Gain | Controls the output gain (+/-6 dB) | Threshold | Controls the threshold of the limiter (-6 dB to off) | Stereo Output | Yellow LED | Mono Output | Yellow LED | Input | Green LED | Limiter | Red LED | Power On | Green LED | Voltage | Internal Voltage Setup:
110 to 120 VAC @ 50 to 60 Hz 220 to 240 VAC @ 50 to 60 Hz | Fuse | 110 to 120 VAC @ T250 mAL, 250 V 220 to 240 VAV @ T500 mAL, 250 V | Power Consumption | 17 W | Dimensions (W x D x H) | 19.0 x 7.7 x 1.7" (48.2 x 19.5 x 4.4 cm) | Weight | 6.6 lb (3.0 kg) | |
The user manual for the dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24 can be downloaded in .pdf
format if it did not come with your new crossovers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other dB Technologies users keep a unique electronic library
for dB Technologies crossoverss,
where you can use our link to download the user manual for the dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24.
The user manual lists all of the functions of the dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24,
all the basic and advanced features and tells you how to use the crossovers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from dB Technologies service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24. User manuals are also
available on the dB Technologies website under Pro Audio - Live Sound - Crossovers.
Question and answer discussion forum concerning user instructions and resolving problems with the dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the dB Technologies ASX 24 2-Way/3-Way Stereo with 4-Way Mono ASX 24
|
|
|
|
|