PDF-MANUALS.com | User manual here!
User manual

User manual DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078

Operating instructions and pdf manual for use - DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078 User manual, User manual DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078, DJI, Ronin, 3-Axis, Brushless, Gimbal, Stabilizer, CP.ZM.0


User manual for DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078

Overall rating 4.0
Overall Rating: 4.0

80% of respondents would recommend this to a friend.
DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078
  • Manufacturer: DJI
  • Basic description and contents of package
  • Product classification: Professional Video - Tripods, Supports & Rigs - Gimbal Stabilizers
  • Safety instructions
  • Startup and operation of the gimbal stabilizers
  • Tips for setting up your DJI
  • Settings and expert assistance
  • Contact DJI service
  • Troubleshooting
  • Warranty information
We recommend checking out our discussion threads on the DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078, which address similar problems with connecting and setting up Gimbal Stabilizers DJI.



User manual for the DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078

The user manual for the DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078 provides necessary instructions for the proper use of the product Professional Video - Tripods, Supports & Rigs - Gimbal Stabilizers.

The Ronin 3-Axis Brushless Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 16 pounds, Ronin uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. The system is computer-controlled and boasts a precision of control of ±0.02°. An IMU (inertial measurement movement) detects movement and engages the motors to react, using algorithms to differentiate between intentional movement such as pans and tracking shots from unwanted shake. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.

The Ronin supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin to install your own receiver.

As with sled and vest style stabilizers, motorized gimbal systems require balancing before use. Once balanced, you can configure the Ronin for your particular camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. Because every camera and lens combination has a different mass and weight distribution, there is an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned. A gimbal tuning stand is provided so you won't have to hand-hold the rig during this process.

The included 4S lithium-polymer battery powers the Ronin for up to four hours. It is a "smart" battery, meaning power regulation and protection circuitry is built-in and there is no separate balancing lead, unlike many lithium-polymer batteries. A charger is also included, and it is important to always use chargers designed for the Ronin battery because of the smart circuitry. Two 12V DC PowerTaps and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin battery to simplify your charging regime and avoid unnecessary added weight.

A hard case is included to store and transport the gimbal and related accessories.
If you own a DJI gimbal stabilizers and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078 in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
User manual for DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078Download user manual for DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078
(PDF file, 26.28 MB)
Additional parameters of the DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078:
Specifications
    Electrical and Mechanical
    Motor Type 3 x Brushless
    Working Current Static Current: 300 mA at 16 V
    Dynamic Current: 600 mA at 16 V
    Locked Motor Current: Maximum of 10 A at 16 V
    Sensors IMU (inertial measurement unit)
    Temperature sensor
    Processing DJI 32-bit DSP processor
    Performance
    Precision of Control ±0.02°
    Maximum Controlled Rotation Speed Pan Axis: 90°/sec
    Tilt Axis: 100°/sec
    Roll Axis: 30°/sec
    Controlled Rotation Range Pan Axis Control: 360°
    Tilt Axis Control: 45° up to 120° down
    Roll Axis control: ±25°
    Receiver
    Frequency 2.4 GHz for proprietary Ronin transmitter
    Expandability 1 x Expansion port for third-party D-Bus/PPM receiver
    Connectivity
    Wireless Bluetooth for Assistant Software
    Wired 1 x Interface for DJI Lightbridge
    System Requirements
    Assistant Software Desktop
    Windows (32- or 64-bit): 8, 7, XP SP3

    Mobile
    iOS: 6.1 or above
    Hardware Mobile
    iPhone: 4s, 5, 5s
    iPod touch: 4, 5
    iPad: 3, 4, mini
    General
    Supported Camera Dimensions Maximum depth at center of mass on camera base plate: 5.5" / 140 mm

    Maximum height measured from top of camera base plate: 8.9" / 225 mm

    Maximum width: 7.7" / 195 mm
    Supported Camera Weight Up to 16 lb / 7.3 kg
    Power Requirements Battery Type: Ronin 4S
    Battery Life: Up to 4 hours
    Power Output 2 x PowerTap with regulated 12VDC output
    1 x USB type A female supplying 500 mW
    Operating Temperature 5 to 120°F / -15 to 50°:C
    Dimensions (W x D x H) 24.4 x 11 to 18 x 19.7" / 620 x 280 to 380 x 500 mm
    Weight 9.3 lb / 4.2 kg
    Packaging Info
    Package Weight 51.0 lb
    Box Dimensions (LxWxH) 30.0 x 20.0 x 14.0"
    B&H Hands-on Learning Videos
    1. DJI Ronin - Installation & Balancing Tutorial 7:31
    Product Demo
    The user manual for the DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078 can be downloaded in .pdf format if it did not come with your new gimbal stabilizers, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other DJI users keep a unique electronic library for DJI gimbal stabilizerss, where you can use our link to download the user manual for the DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078.

    The user manual lists all of the functions of the DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078, all the basic and advanced features and tells you how to use the gimbal stabilizers. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from DJI service.

    If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078. User manuals are also available on the DJI website under Professional Video - Tripods, Supports & Rigs - Gimbal Stabilizers.



    Discussion Question and answer discussion forum concerning user instructions and resolving problems with the DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078 - no comments have been made yet - be the first to add a comment

    Post new comment/question/response regarding the DJI Ronin 3-Axis Brushless Gimbal Stabilizer CP.ZM.000078

    Fields marked with * must be filled out.
    Your name *:
    E-mail :
    Subject *:
    Message text *:
    Enter the code *:
    (spam block)
    "manual"
    If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

     

    Can't find what you're looking for? Try Google Search!





    Current discussions
    Most recently discussed products:

    not charging. flasing battery with x - Energizer Family Charger NiMH Universal Battery Charger CHFC
    Posted by: Cindy Barton
    2018-04-22 17:53:00

    Not charging.. Flashing battery with an x in it...
    Key functions/punctuasion - Logitech Keyboard K120 920-002478
    Posted by: Wessel
    2018-04-22 14:46:29

    I need instrucions how to male use of punctuasion...
    rm06 - Trijicon RM06 RMR Adjustable LED Reflex Sight RM06-C-700216
    Posted by: Mattczar
    2018-04-21 21:32:39

    need manual...
    Self Adjusting Holding Clamp - Celestron LCD Digital Microscope II 44341
    Posted by: Jackie.easterling
    2018-04-21 20:23:51

    The self adjusting lever action holding clamp does not adjust to the slide when adjusting stage. ...
    Need Manual - Konus Konustart-900 60mm f/15 Refractor Telescope 1741 V2
    Posted by: adela
    2018-04-21 18:49:34

    I need a copy of the manual for the Konustart900. Thank you...

    Uploaded instruction manuals
    Upload a link to an instruction manual for a depicted product here:

    Link format "http://www.link2manual.com/manual.pdf"

    Enter the code: "manual"






    PDF-MANUALS.com - Community administered database of instructions for use and PDF user manuals
    sitemap.txt