|
User manual for DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144
Overall Rating: 4.0
80% of respondents would recommend this to a friend.
- Manufacturer: DJI
- Basic description and contents of package
- Product classification: Professional Video - Tripods, Supports & Rigs - Gimbal Stabilizers
- Safety instructions
- Startup and operation of the gimbal stabilizers
- Tips for setting up your DJI
- Settings and expert assistance
- Contact DJI service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144,
which address similar problems with connecting and setting up Gimbal Stabilizers DJI.
|
User manual for the DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144
The user manual for the DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144 provides
necessary instructions for the proper use of the product Professional Video - Tripods, Supports & Rigs - Gimbal Stabilizers.
The Ronin-M 3-Axis Handheld Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 8 pounds, the Ronin-M uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. The system is computer-controlled and features a tilt range of 105⁰ up / 165⁰ down plus a roll range of ±110⁰. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.
The Ronin-M supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin-M itself moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin-M to install your own receiver.
As with sled and vest style stabilizers, motorized gimbal systems require balancing before use. Once balanced, you can configure the Ronin-M for your particular camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. Because every camera and lens combination has a different mass and weight distribution, there is an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned. A gimbal tuning stand is provided so you won't have to hand-hold the rig during this process.
The included 4S lithium-polymer battery powers the Ronin-M for up to six hours. It is a "smart" battery, meaning power regulation and protection circuitry is built-in and there is no separate balancing lead, unlike many lithium-polymer batteries. A charger is also included, and it is important to always use chargers designed for the Ronin-M battery because of the smart circuitry. Two 12V DC PowerTaps and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin-M battery to simplify your charging regime and avoid unnecessary added weight.
|
If you own a DJI gimbal stabilizers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144:
| Load Weight (Reference Value) | 8 lb / 3.6 kg | | Angular Vibration Range | ±0.02° | | Maximum Controlled Rotation Speed | Pan Axis: 90°/s
Tilt Axis: 100°/s
Roll Axis: 30°/s | | Mechanical Endpoint Range | Pan Axis Control: 360°/s
Tilt Axis Control: +105° /-165°/s
Roll Axis Control: ± 110°/s | | Controlled Rotation Range | Pan Axis Control: 360°/s
Tilt Axis Control: +105° /-165°/s
Roll Axis Control: ± 25°/s | | Motor Type | 3 x Brushless | | Working Current | Static Current: 300 mA (at 16 VDC)
Dynamic Current: 600 mA (at 16 VDC)
Locked Motor Current: 10 A maximum (at 16 VDC) | | Sensors | Independent IMU module
Temperature sensor | | Processing | 32-bit DSP processor | | Frequency | 2.4 GHz | | Expandability | D-Bus receiver supported | | Wireless | 2.4 GHz for transmitter (remote controller)
Bluetooth 4.0 | | Wired | 2 x 12 VDC regulated PowerTap
1 x USB power output (500 mW)
1 x DJI Lightbridge interface | | Assistant Software | Desktop: Windows (32- or 64-bit): 8, 7, XP SP3
Mac OS X: 10.9 or above
Mobile:
iOS 7.0 or later | | Control Modes | Underslung Mode
Upright Mode
Briefcase Mode | | Supported Camera Dimensions | Maximum depth at center of mass on camera base plate: 4.7" / 120 mm
Maximum height measured from top of camera base plate: 7.7" / 195 mm
Maximum width: 6.3" / 160 mm | | Power Requirements | 4S Ronin-M Battery | | Operating Temperature | -5 to 122°F / -15 to 50°C | | Dimensions (W x D x H) | 19.7 x 8.3 x 16.5" / 500 x 210 x 420 mm | | Weight | 5.07 lb / 2.3 kg (fully loaded with handlebar) | | Package Weight | 15.85 lb | | Box Dimensions (LxWxH) | 18.8 x 12.5 x 11.5" | |
The user manual for the DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144 can be downloaded in .pdf
format if it did not come with your new gimbal stabilizers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other DJI users keep a unique electronic library
for DJI gimbal stabilizerss,
where you can use our link to download the user manual for the DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144.
The user manual lists all of the functions of the DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144,
all the basic and advanced features and tells you how to use the gimbal stabilizers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from DJI service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144. User manuals are also
available on the DJI website under Professional Video - Tripods, Supports & Rigs - Gimbal Stabilizers.
Question and answer discussion forum concerning user instructions and resolving problems with the DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer CP.ZM.000144
|
|
|
|
|
