|
User manual for Earthworks CMK1 CloseMic Kit CMK1
- Manufacturer: Earthworks
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Small Diaphragm Condenser
- Safety instructions
- Startup and operation of the small diaphragm condenser
- Tips for setting up your Earthworks
- Settings and expert assistance
- Contact Earthworks service
- Troubleshooting
- Warranty information
- Price: 999 USD
|
We recommend checking out our discussion threads on the Earthworks CMK1 CloseMic Kit CMK1,
which address similar problems with connecting and setting up Small Diaphragm Condenser Earthworks.
|
User manual for the Earthworks CMK1 CloseMic Kit CMK1
The user manual for the Earthworks CMK1 CloseMic Kit CMK1 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Small Diaphragm Condenser.
The CMK1 CloseMic Kit from Earthworks is designed for close miking tom and snare. It is housed in a high impact case that will withstand the rigors of the road. The high impact cases allow you to store the Drum Periscope microphone with the RM1 attached, thus saving time in setup and teardown. This kit consists of the DP30/C Tom & Snare Drum Periscope Microphone, LevelPad, PW1 Foam Teardrop Windscreen, and RM1 RimMount.
The DP30/C Tom & Snare Drum Periscope Microphone is designed for close miking toms and snare drums, and will take a direct hit from a drumstick. A right angle mic head is mounted to the gooseneck for easy positioning. The Drum Periscope is mounted parallel to the drum shell with the RM1 RimMount.
|
If you own a Earthworks small diaphragm condenser and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Earthworks CMK1 CloseMic Kit CMK1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Earthworks CMK1 CloseMic Kit CMK1:
| Polar Pattern | Cardioid | | Frequency Range | 30 Hz to 30 kHz | | Signal to Noise Ratio | 72 dB A-Weighted | | Equivalent Noise Level | 20 dB A-Weighted | | Maximum SPL | 145 dB SPL | | Impedance | 65 ohms | | Load Impedance | 600 ohms | | Sensitivity | 10 mV/PA | | Power Requirements | 48 V | | Output Connectors | 3-pin XLR | | Operating Current Consumption | 10 mA | | Length | 10.75" (273.05 mm) | | Diameter | 0.86" (21.84 mm) | | Weight | 0.22 lb (100 g) | |
The user manual for the Earthworks CMK1 CloseMic Kit CMK1 can be downloaded in .pdf
format if it did not come with your new small diaphragm condenser, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Earthworks users keep a unique electronic library
for Earthworks small diaphragm condensers,
where you can use our link to download the user manual for the Earthworks CMK1 CloseMic Kit CMK1.
The user manual lists all of the functions of the Earthworks CMK1 CloseMic Kit CMK1,
all the basic and advanced features and tells you how to use the small diaphragm condenser.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Earthworks service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Earthworks CMK1 CloseMic Kit CMK1. User manuals are also
available on the Earthworks website under Pro Audio - Recording - Small Diaphragm Condenser.
Question and answer discussion forum concerning user instructions and resolving problems with the Earthworks CMK1 CloseMic Kit CMK1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Earthworks CMK1 CloseMic Kit CMK1
|
|
|
|
|
