User manual EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP
Operating instructions and pdf manual for use - EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP User manual, User manual EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP, EnGenius, EWS300AP, Neutron, Series, Indoor, Cei
User manual for EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP
Startup and operation of the wireless access points
Tips for setting up your EnGenius
Settings and expert assistance
Contact EnGenius service
Troubleshooting
Warranty information
Price: 190 USD
Click to enlarge image
We recommend checking out our discussion threads on the EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP,
which address similar problems with connecting and setting up Wireless Access Points EnGenius.
User manual for the EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP
The user manual for the EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Wireless Access Points.
With a low profile design the EWS300AP Neutron Series Indoor Ceiling-Mount Managed Access Point from EnGenius can be discretely mounted on the wall or the ceiling. Once mounted you can take advantage of 802.11a/b/g/n Wi-Fi network connectivity on the 2.4 GHz frequency for data transfer rates of up to 300 Mbps. Inside this access point you will find two 5 dBi internal high gain antennas with a transmit power of up to 29 dBm providing a strong wireless signal capable of reaching through walls and even onto adjacent floors. The possibilities are virtually endless as this access point can easily be incorporated into a larger network of over 1,000 APs and switches.
If you own a EnGenius wireless access points and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP:
Specifications
Wi-Fi Standards
IEEE 802.11b/g/n on 2.4 GHz IEEE 802.3af Power-over-Ethernet Radio I: 11b/g/n: 2.412-2.472 GHz
Antennas
2 x 5 dBi 2.4 GHz internal high gain antennas
Physical Interfaces
1 x 10/100/1000 Gigabit Ethernet port 1 x Reset button 1 x Power connector
Physical Security
Kensington security slot
LED Indicators
1 x Power 1 x WLAN (wireless connection) 1 x LAN
Power Source
DC Input: 12 VDC / 1 A PoE: Compatible with 802.3af
Power Consumption
Not specified by manufacturer
Mounting
Ceiling or wall mount
Memory Capacity
Memory: 128 MB Flash Memory: 16 MB
Wireless Radio Specifications
Single band
Operation Modes
Access point
Transmit Power
Up to 29 dBm on 2.4 GHz Max. transmit power is limited by regulatory power
Radio Chains/Spatial Streams
2x2: 2
Supported Data Rates
2.4 GHz: Max 300 802.11b: 1, 2, 5.5, 11 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15)
Supports 802.1q SSID-to-VLAN tagging VLAN Pass through Wireless Client List Independent VLAN settings can be enabled or disabled Any packet without a VLAN tag will be inserted into a PVID (Ethernet Port VID) Client Traffic Status
Spanning Tree
Supports 802.1d Spanning Tree Protocol
QoS
IEEE 802.11e/WMM
SNMP
v1, v2c, v3
MIB
I/II, Private MIB
Deployment
Standalone (Individually Managed) Managed by Neutron Series EWS Switch
Configuration
Web Interface (HTTP) SNMP v1/v2c/v3 with MIB I/II and private MIB CLI (Telnet)
Firmware Upgrade
Web interface or CLI (FTP/HTTP)
Backup / Restore
Revert to factory default settings
Control Features
CLI supported Multicast supported Wi-Fi scheduler PMKSA support for Fast Roaming Fast Handover Schedule Reboot/Auto Reboot Client Statistics E-Mail Alert RADIUS Accounting Guest Network IPv4/IPv6
Operating Temperature: 32 to 104°F / 0 to 60°C Storage Temperature: -4 to 140°F / -20 to 60°C Operating Humidity: 90% or less (non-condensing) Storage Humidity: 90% or less (non-condensing)
Dimensions
5.07 x 5.07 x 1.73" / 129.0 x 129.0 x 43.9 mm
Weight
0.45 lb / 202 g
The user manual for the EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP can be downloaded in .pdf
format if it did not come with your new wireless access points, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other EnGenius users keep a unique electronic library
for EnGenius wireless access pointss,
where you can use our link to download the user manual for the EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP.
The user manual lists all of the functions of the EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP,
all the basic and advanced features and tells you how to use the wireless access points.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from EnGenius service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP. User manuals are also
available on the EnGenius website under Computers & Solutions - Networking - Wireless Access Points.
Question and answer discussion forum concerning user instructions and resolving problems with the EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the EnGenius EWS300AP Neutron Series Indoor Ceiling-Mount EWS300AP - no comments have been made yet - be the first to add a comment