|
User manual for ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125
- Manufacturer: ETC
- Basic description and contents of package
- Product classification: Lighting & Studio - Lighting Accessories - DMX Devices
- Safety instructions
- Startup and operation of the dmx devices
- Tips for setting up your ETC
- Settings and expert assistance
- Contact ETC service
- Troubleshooting
- Warranty information
- Price: 995 USD
|
We recommend checking out our discussion threads on the ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125,
which address similar problems with connecting and setting up DMX Devices ETC.
|
User manual for the ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125
The user manual for the ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125 provides
necessary instructions for the proper use of the product Lighting & Studio - Lighting Accessories - DMX Devices.
The DIN-Rail Mount Gateway from ETC is a network data distribution device for lighting systems that is housed in a DIN installation enclosure. It is built for Net3 and uses industry-standard streaming protocols such as ACN and sACN. The Gateway also uses bi-directional Ethernet communication with other networked devices to send or receive DMX512 and Remote Device Management (RDM) signals. This DIN-rail gateway features an extruded aluminium enclosure and is fully compliant with DIN43880 mounting standard, ensuring it fits any standard 35mm symmetrical DIN rail.
|
If you own a ETC dmx devices and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125:
Compliances | RoHS, CE, ETL DIN43880 (35/7.5 mm rail) Net3/ACN (ANSI E1.31 and E1.17) RDM (ANSI E1.20) USITT DMX512 USITT DMX512-A (ANSI E1.11) IEEE 802.3i for 10BASE-T, 802.3u for 100BASE-TX, and 802.3af for Power over Ethernet | Functions | Advanced Input Patch (AIP) allows any incoming address to be associated with any sACN address Flexible Output Patch (FOP) allows a 512 address universe to begin at any output address Support for per-address or per-universe level priority | Configuration | Net3 Mode configuration provided by Gateway Configuration Editor (GCE) or directly from ACN Supports up to 512 DMX addresses per port Supports up to 63,999 streaming ACN universes Up to 2,048 channels in combination of data input or output DMX data input or output configurable by user Multiple outputs of a single DMX universe (DMX splitter) from a single gateway Supports discrete DMX universe outputs per port Multiple sources may be combined to the network with each source or address allowed an independent priority Individual port start address and offset User-configurable labeling | Processor | Maximum delay time from input to output not greater than one packet time Selectable DMX refresh rate with maximum 40 Hz | RJ45 Connector | For connection to lighting network | Buttons | Reset button for hard reset or forced reboot Menu button for backlight/paging control | Display | Backlit LCD display for identification and status reporting | Indicators | Blue power indicator; green network activity indicator Bi-color DMX activity indicator | Material | Extruded aluminum | Power | Supports IEEE802.3af Power over Ethernet or 8 to 28 VDC external power supply Maximum power consumption less than 5 W | Ambient Operating Temperature | 32 to 104°F (0 to 40°C) | Operating Humidity | 5 to 95% non-condensing | Storage Temperature | -40 to 158°F (-40 to 70°C) | Dimensions | 4.1 x 8.0 x 1.6" (10.5 x 20.4 x 4.1 cm) | Weight | 12.8 oz (382.9 g) | |
The user manual for the ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125 can be downloaded in .pdf
format if it did not come with your new dmx devices, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other ETC users keep a unique electronic library
for ETC dmx devicess,
where you can use our link to download the user manual for the ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125.
The user manual lists all of the functions of the ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125,
all the basic and advanced features and tells you how to use the dmx devices.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from ETC service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125. User manuals are also
available on the ETC website under Lighting & Studio - Lighting Accessories - DMX Devices.
Question and answer discussion forum concerning user instructions and resolving problems with the ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the ETC Net3 N34G-DIN Four-Port DMX/RDM DIN-Rail Mount 4260A1125
|
|
|
|
|