We recommend checking out our discussion threads on the FLIR HS-307 Patrol 30Hz Thermal Monocular (NTSC) TFT233MN6HN307P,
which address similar problems with connecting and setting up Thermal Imagers FLIR.
User manual for the FLIR HS-307 Patrol 30Hz Thermal Monocular (NTSC) TFT233MN6HN307P
The user manual for the FLIR HS-307 Patrol 30Hz Thermal Monocular (NTSC) TFT233MN6HN307P provides
necessary instructions for the proper use of the product Optics - Night & Thermal Vision - Thermal Imagers.
The NTSC configuration of HS-307 Patrol 30Hz Thermal Monocular from FLIR is a handheld thermal monocular capable of outputting the transmitting image to a remote monitor or recording device. The 320x240 VOx thermal sensor measures the heat signature within the field of view and enables the operator to see beyond smoke, dust, and fog obscuring the visual scene. Thermal imaging creates an image by discriminating between differences in temperature, allowing the HS-307 to consistently operate in daylight, pitch dark, and dynamic lighting conditions. To optimize the transmitted image for specific applications, this monocular features two selectable polarity modes and five selectable brightness levels.
If you own a FLIR thermal imagers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the FLIR HS-307 Patrol 30Hz Thermal Monocular (NTSC) TFT233MN6HN307P in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the FLIR HS-307 Patrol 30Hz Thermal Monocular (NTSC) TFT233MN6HN307P:
Specifications
Array Configuration
320 x 240 VOx microbolometer
Sensitivity
<50 mk at f>
Spectral Response
7.5 - 13.5 µm
Field of View
7 x 5°
Lens System
65 mm
Eye Relief
Not specified by mfr
Minimum Focus Distance
Not specified by mfr
Diopter Correction
+/- 2
Refresh Rate
30Hz
Video Output
NTSC via composite video
Start-Up Time
1.5 seconds (from stand-by)
Power Source
(4) rechargeable NiMh AA batteries
Runtime
Up to 6 hours of continuous operation at room temperature (with included batteries)
The user manual for the FLIR HS-307 Patrol 30Hz Thermal Monocular (NTSC) TFT233MN6HN307P can be downloaded in .pdf
format if it did not come with your new thermal imagers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other FLIR users keep a unique electronic library
for FLIR thermal imagerss,
where you can use our link to download the user manual for the FLIR HS-307 Patrol 30Hz Thermal Monocular (NTSC) TFT233MN6HN307P.
The user manual lists all of the functions of the FLIR HS-307 Patrol 30Hz Thermal Monocular (NTSC) TFT233MN6HN307P,
all the basic and advanced features and tells you how to use the thermal imagers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from FLIR service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the FLIR HS-307 Patrol 30Hz Thermal Monocular (NTSC) TFT233MN6HN307P. User manuals are also
available on the FLIR website under Optics - Night & Thermal Vision - Thermal Imagers.
Question and answer discussion forum concerning user instructions and resolving problems with the FLIR HS-307 Patrol 30Hz Thermal Monocular (NTSC) TFT233MN6HN307P - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17