|
User manual for Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB
Overall Rating: 4.5
90% of respondents would recommend this to a friend.
- Manufacturer: Focusrite
- Basic description and contents of package
- Product classification: Pro Audio - Computer Audio - Audio Interfaces & Systems
- Safety instructions
- Startup and operation of the audio interfaces & systems
- Tips for setting up your Focusrite
- Settings and expert assistance
- Contact Focusrite service
- Troubleshooting
- Warranty information
- Price: 150 USD
|
We recommend checking out our discussion threads on the Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB,
which address similar problems with connecting and setting up Audio Interfaces & Systems Focusrite.
|
User manual for the Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB
The user manual for the Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - Audio Interfaces & Systems.
The Scarlett 2i2 from Focusrite is a 2 input, 2 output portable USB recording interface featuring two Focusrite preamps, housed in an anodized-aluminum unibody chassis that is solid enough to take on the road. The preamps offer transparent, low-noise, and low-distortion performance with sufficient available headroom for using moving-coil, condenser, or ribbon microphones. Phantom power is switchable.
The front-panel Neutrik combo connectors can used to connect both line and instrument level signals as well as microphones. This makes it perfect for recording the output of a synthesizer or stage piano, while a flick of a switch caters for the output of an electric or acoustic guitar. Halo signal indicators help with maintaining correct levels. Red indicates a clipping signal, and with reduced gain the lights will momentarily turn amber before returning to green.
A large monitor dial provides control over the output level being sent to monitor speakers, while a high-quality amplifier provides a clean yet loud signal to headphones. A direct monitor switch routes audio directly from the inputs to both the headphone and speaker outputs, allowing for zero-latency monitoring. The included Scarlett Plug-In suite provides EQ, compression, gate, and reverb processing, and is cross-platform compatible with all major DAWs.
The Focusrite Red 2 and Red 3 Plug-In Suite (AAX, Audio Units, VST) delivers accurately modeled plug-ins based on the classic Focusrite Red 2 EQ and Red 3 Compressor hardware. The plug-ins allow for conveniently exploring the sound of the hardware originals from within Pro Tools (10 and above), along with other audio software. The software is a free download for new and current owners of the Scarlett 2i2.
In addition to the Red 2 and Red 3 Plug-in Suite, the interface includes the Softube Time and Tone Pack. TSAR-1R Reverb adds space, depth, and width to a sound. Change settings with a single slider, from realistic three-dimensional rooms to dramatic and dreamlike halls. Tube Delay is an echo effect that can go from clean to rude by overdriving its three modeled tube stages - delivering everything from realistic room echoes, to rockabilly style slap back, to dub reggae echo. Saturation Knob is a modeled output distortion unit that adds grit and warmth - use it to fatten up bass lines, add some harmonics and shimmer to vocals, or simply destroy a drum loop.
|
If you own a Focusrite audio interfaces & systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB:
| Type | USB 2.0 | | Converter | 24-bit, internal clock | | Sample Rates | 44.1, 48, 88.2 and 96 kHz | | Inputs | 2 x XLR/TRS combo Microphone/Line/Instrument | | Maximum Input Level | Microphone: -3 dBu
Instrument: -3 dBu
Line: +20 dBu | | Gain Range | Microphone: +10 dB to +55 dB
Instrument: +10 dB to +55 dB
Line: +10 dB to +35 dB | | Outputs | 2 x 1/4" TRS phone
1 x 1/4" TRS phone Headphone | | Output Impedance | <10 ohms | | Output Level | Nominal: 0 dBFS = 10 dBu, balanced
15 mW into 150 ohms
30 mW into 50 ohms | | Dynamic Range | Microphone/Line: 105 dB, A-weighted
Line Output: 117 dB, A-weighted | | THD + N | Microphone/Line: 0.002%, -1 dBFS, 22 Hz to 22 kHz BPF
Instrument: 0.005%, -8 dBu input, 22 Hz to 22 kHz BPF
Line Output: 0.001%, -1 dBFS, 22 Hz to 22 kHz BPF, unweighted | | Frequency Response | Inputs: 20 Hz to 20 kHz, +/-0.1 dB
Outputs: 20 Hz to 20 kHz, +/-0.2 dB | | Noise | Microphone EIN: <-120 dB, measured @ 55 dB of gain with 150 ohm termination (20 Hz to 22 kHz BPF)
Instrument: -87 dBu (22 Hz to 22 kHz BPF)
Line: -90 dBu (22 Hz to 22 kHz BPF) | | Signal to Noise Ratio | Line: >100 dB | | Crosstalk | Input to Input: better than 90 dB
Output to Output: better than 90 dB
Input to Output: better than 85 dB | | Power Requirements | USB bus | | System Requirements | Mac:
OS X 10.6.5 (32- and 64-bit) and above
PC:
Windows 7 (32- and 64-bit), Windows 8, and Windows 10 | | Dimensions (WxDxH) | 7 x 4 x 1.75" (175 x 100 x 45 mm) | | Weight | 1.3 lb (580 g) | | Package Weight | 2.1 lb | | Box Dimensions (LxWxH) | 9.8 x 6.8 x 4.0" | |
The user manual for the Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB can be downloaded in .pdf
format if it did not come with your new audio interfaces & systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Focusrite users keep a unique electronic library
for Focusrite audio interfaces & systemss,
where you can use our link to download the user manual for the Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB.
The user manual lists all of the functions of the Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB,
all the basic and advanced features and tells you how to use the audio interfaces & systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Focusrite service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB. User manuals are also
available on the Focusrite website under Pro Audio - Computer Audio - Audio Interfaces & Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Focusrite Scarlett 2i2 - Portable USB Audio SCARLETT 2I2 USB
|
|
|
|
|
