|
User manual for For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS
- Manufacturer: For.A
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Video & Audio Processing
- Safety instructions
- Startup and operation of the video & audio processing
- Tips for setting up your For.A
- Settings and expert assistance
- Contact For.A service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS,
which address similar problems with connecting and setting up Video & Audio Processing For.A.
|
User manual for the For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS
The user manual for the For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Video & Audio Processing.
The For.A UFM-80TSCS TS Changeover Switcher is a modular-type unit featuring 2 inputs, which can be mounted in a UFM frame. This TS automatic seamless switcher constantly monitors 2 TS signals output from the same encoder on a redundant circuit for errors, and switches the output seamlessly to the other line when an error occurs. To prevent an error on the transmission path, this switcher further increases the reliability of duplex transmission.
|
If you own a For.A video & audio processing and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS:
Standard | DVB-ASI | Format | Data Packet, Burst, 188 bytes/204 bytes | Bit Rate | 1 to 160 Mb/s | Connector | 2 x 75 Ω unbalanced BNC | Standard | DVB-ASI (EN50083-9) compliant | Format | Data Packet; Packet size can be set to INPUT/188 fixed/204 fixed (burst input is converted to packet output). | Bit Rate | 1 to 160 Mb/s | Connector | 2 x 75 Ω unbalanced BNC (selected input signal is bypassed (high-frequency relay) to output1 when the power is off). | Control System | Delay Adjustment Range: Input signal phase difference within ±500 ms System Delay: Standard 50 ms (2 to 1,200 ms according to set offset value) Error Detection Item (On/Off settable): Packet loss (including illegal code error), SYNC byte/loss error, transport error indicator, CC error (1 to 4 PMT series only), PID error (packet arrival error) (1 to 4 PMT series only), NULL only error CC Error Details (ON/OFF settable): Automatically Detected PID: PAT_CC, PMT_CC, VIDEO_CC, AUDIO1_CC, AUDIO2_CC, AAC AUDIO1_CC, AAC AUDIO2_CC, DATA1_CC, DATA2_CC USER_PID: USER1_PID_CC, USER2_PID_CC, USER3_PID_CC | GPI | Programmable assignment from GUI Over 36 different parameters including In/Out settings can be set for each of the 7 ports, such as input selection monitoring and control, signal status monitoring for each input, operating mode control, output signal status monitoring, and more. Input: Photo coupler (7 mA or higher control current 50 ms or longer short-circuit protection time) Output: Open collector (40 V maximum voltage, 100 mA maximum current) | Ethernet | 10BASE-T/100BASE-TX Remote Control by Dedicated GUI: Signal status monitoring / Main unit setting / Event log viewer / Log CSV file auto-save function, and more SNMP Support: Main unit control and notification of errors and event traps for up to 4 different IP addresses For Maintenance: Firmware updates | Power / Consumption | 24 VDC supplied from the UFM frame / 20 W | Temperature / Humidity | 32 to 104°F (0 to 40°C) / 85% or less (no condensation) | Dimensions | Front (W x D): 4.2 x 11.5" (106.0 x 293.2 mm) Rear (W x D x H): 4.3 x 3.8 x 0.8" (108.5 x 96.0 x 20.0 mm) | Weight | Approximately 2.2 (1.0 kg) | |
The user manual for the For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS can be downloaded in .pdf
format if it did not come with your new video & audio processing, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other For.A users keep a unique electronic library
for For.A video & audio processings,
where you can use our link to download the user manual for the For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS.
The user manual lists all of the functions of the For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS,
all the basic and advanced features and tells you how to use the video & audio processing.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from For.A service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS. User manuals are also
available on the For.A website under Professional Video - Signal Processing & Distribution - Video & Audio Processing.
Question and answer discussion forum concerning user instructions and resolving problems with the For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the For.A UFM-80TSCS TS Changeover Switcher (2 Inputs) UFM-80TSCS
|
|
|
|
|