|
User manual for IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S
- Manufacturer: IDX System Technology
- Basic description and contents of package
- Product classification: Professional Video - Camcorder & Camera Peripherals - Wireless Transmission Systems
- Safety instructions
- Startup and operation of the wireless transmission systems
- Tips for setting up your IDX System Technology
- Settings and expert assistance
- Contact IDX System Technology service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S,
which address similar problems with connecting and setting up Wireless Transmission Systems IDX System Technology.
|
User manual for the IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S
The user manual for the IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S provides
necessary instructions for the proper use of the product Professional Video - Camcorder & Camera Peripherals - Wireless Transmission Systems.
The CW-7 Gold-Mount Uncompressed Wireless HD/SD-SDI Transmission System is a transmitter and receiver set that allows you to send an HD/SD-SDI signal up to 328 ft with zero frame delay (less than 1 ms). It supports resolutions up to 1080i60/50 uncompressed in YCbCr 4:2:2 10-bit with two channels of embedded audio. Featuring four discreet channels, the system supports unicast operation, wherein multiple transmitters and receivers can utilize the available channels, and multicast operation where one transmitter can send to up to four receivers at the same time.
The transmitter features one HD/SD-SDI input and one loop-output, and the receiver unit offers dual simultaneous HD/SD-SDI outputs. Both units feature a Gold-mount plates on both sides and a 4-pin XLR male power input. The transmitter is intended to be sandwiched in between a Gold-mount battery and Gold-mount plate on your camera. You can also use the XLR input to power the transmitter but it won't be able to pass power to the camera. Both units also have a 3/8"-16 thread for additional mounting options.
Both units have internal 24dBm antennas and operate on the license free 5 GHz frequency spectrum using a MIMO transmit method.
|
If you own a IDX System Technology wireless transmission systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S:
| Input / Output | Transmitter:
1x HD/SD-SDI input
1x HD/SD-SDI loop output
1x 4-pin XLR male power input
Receiver:
2x HD/SD-SDI outputs
1x 4-pin XLR male power input | | Frequency | 5.190 - 5.795 GHz | | Frequency Selection | 4 selectable channels and 1 DFS (Tx and Rx) | | Transmission Range | Up to 328 ft (100 m) in 1080i60/50 | | Transmission Power | 80 mW maximum | | Antenna | Internal 24 dBm (Tx and Rx) | | Transmit Method | MIMO (multiple in / multiple out) | | Modulation | OFDM (Orthogonal Frequency Diversity Multiplexing) | | Latency | Zero frame (less than 1 ms) | | Video Input | HD-SDI (SMPTE 292M); SD-SDI (SMPTE 259M-C) | | Video Format | YCbCr 4:2:2 10-bit | | Supported Resolutions | HD 1080: 60i, 59.94i, 50i, 29.97p, 25p, 24p, 23.98p, 30PsF, 29.97PsF, 25PsF, 24PsF, 23.98PsF
HD 720: 59.94p, 50p
SD 525: 59.94i 625: 50i | | Audio | Ch 1 and 2 SDI embedded | | Power Requirement | 11-17 V DC via battery plate or 12 V DC via 4-pin XLR connector | | Power Consumption | 12 W approx. | | Mounting Threads | 3/8"-16 thread on each unit | | Approvals | FCC, CE, MIC (TELEC), and RoHS specifications | | Dimensions | 6.2 x 7.4 x 2.8" (5.7 x 18.8 x 7.1 cm) | | Weight | Transmitter: 1.9 lb (0.86 kg), Receiver: 1.8 lb (0.82 kg) | | Package Weight | 4.9 lb | | Box Dimensions (LxWxH) | 15.2 x 9.6 x 4.5" | |
The user manual for the IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S can be downloaded in .pdf
format if it did not come with your new wireless transmission systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other IDX System Technology users keep a unique electronic library
for IDX System Technology wireless transmission systemss,
where you can use our link to download the user manual for the IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S.
The user manual lists all of the functions of the IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S,
all the basic and advanced features and tells you how to use the wireless transmission systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from IDX System Technology service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S. User manuals are also
available on the IDX System Technology website under Professional Video - Camcorder & Camera Peripherals - Wireless Transmission Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the IDX System Technology CW-7 Gold-Mount Uncompressed CW-7-3S
|
|
|
|
|
