User manual Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI
Operating instructions and pdf manual for use - Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI User manual, User manual Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI, Imagine, Communications, Videotek, CMVS-DVI, Compa
User manual for Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI
Manufacturer: Imagine Communications
Basic description and contents of package
Product classification: Professional Video - Signal Processing & Distribution - Video & Audio Signal Generators
Safety instructions
Startup and operation of the video & audio signal generators
Tips for setting up your Imagine Communications
Settings and expert assistance
Contact Imagine Communications service
Troubleshooting
Warranty information
Price: 10 USD
We recommend checking out our discussion threads on the Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI,
which address similar problems with connecting and setting up Video & Audio Signal Generators Imagine Communications.
User manual for the Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI
The user manual for the Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Video & Audio Signal Generators.
The Videotek CMVS-DVI Compact Monitor and Signal Generator Package from Imagine Communications consists of the CMN-41-3GB and the VSG-401 mounted in the DRT-4 dual rackmount chassis. The CMN compact monitor and VSG-401 will support dual-link, 3G/HD/SD-SDI signal formats, and provide test signals and Black burst or Tri level sync to test the system signal path integrity. The CMN-41-3GB provides a DVI-D output to connect to any standard DVI-D monitor for display of waveform, vector, timing, audio, and other displays.
The VSG-401 provides four copies of the SDI test signal output with selectable format, frame rate and signal type, and up to 16 channels of embedded audio, with group enabled settings and global settings for amplitude and frequency. There are two AES outputs, with one output selectable as word clock or digital audio reference signal (DARS). Also included are two copies of the sync output selectable as blackburst or tri-level sync along with a looping reference input that accepts blackburst or tri-level sync. The test signal outputs on the VSG-401 allow source ID selection up to 19 characters. You can add continuous motion of a bouncing block to any test pattern except check field.
If you own a Imagine Communications video & audio signal generators and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI:
CC608: EIA/CEA-608-E CC708/DTVCC: EIA/CEA-708-D Teletext: EN 300 706 Presentation Level 1 teletext and subtitles HD Teletext: OP-47 delivery of EN 300 706 teletext and subtitles
VSG-401 Compact Video and Audio Signal Generator (1 RU, Half Rack)
Genlock Input
Input Connector: 1 x BNC Input Impedance: Hi-Z Black Burst Input Amplitude (nominal with ± 6 dB tolerance): NTSC: 286 mV, PAL: 300 mV Return Loss: ≥40 dB to 10 MHz Lock Range: ± 6 ppm (NTSC Fsc ± 21 Hz, PAL Fsc ± 26 Hz) Black Burst Subcarrier Jitter: <1 ns (p-p) over one horizontal line Tri-Level Sync Amplitude: 600 mV p-p nominal Tri-Level Sync Amplitude Tolerance: ± 3 dB
Outputs
Black Burst / Tri-level Sync (TLS): Output Connectors: 2 x BNC female Load Impedance: 75 ohms nominal Return Loss: ≤ -40 dB (100 kHz to 10 MHz) Black Burst Signal Level (nominal): NTSC: 286 mV, PAL: 300 mV Black Burst Subcarrier Jitter: <1 ns (p-p) over one horizontal line Tri-Level Signal Level: 600 mV p-p DC Offset: 0 V ± 0.5 V SC/H Phase: 0° ± 10º Reference to Output Timing: ± 100 ns
SDI Output
Output Connectors: 4 x BNC female Output Impedance: 75 ohms nominal Output Return Loss: 1.485 to 3 GHz ≤ -10 dB 5 MHz to 1.485 GHz ≤ -15 dB Output Signal Level: 800 mV ± 10% Output DC Offset: 0 V ± 0.5 V Output Rise and Fall Time: @ 2.97 GHz: <135 ps (20 to 80% amplitude), not differing by more than 50 ps @ 1.484 GHz: <270 ps (20 to 80% amplitude), not differing by more than 100 ps @ 270 MHz: 400 to 700 PS (20 to 80% amplitude), not differing by more than 500 PS Jitter: @ 2.97 GHz: <0.3UI @ 1.484 GHz: <0.2 UI @ 270 MHz: <0.2 UI
Color Bars: 100% color bars, 75% color bars, RP-219 with +I, RP-219 with -I, RP-219 100% white, RP-219 75% white, SMPTE bars Patterns: Check field, 4:3 in 16:9, circle, co-sited pulse, cross hatch, flat field 0%, 50%, 100%, red field, visible field, line sweep, multiburst, multiburst Y only, pulse bar, limit ramp, shallow ramp, ramp Y only, 5 step Y only, zone plate, V2A timing
Audio
Audio Formats: AES or DARS, unbalanced Sample Rate: 48 kHz Output Impedance: 75 ohms Output Connectors: 2 x BNC AES Output Return Loss: ≤ -25 dB @ -0.1 to 6 MHz Output Signal Level: 1 V p-p (75 ohms terminated) AES Jitter: 0.25 UI
Word Clock
Output Connector: 1 x BNC female (shared with AES/DARS) Output Impedance: 75 ohms nominal Output Level: 5 V TTL (with 75 ohms load)
Embedded Audio
Output Sample Rate: AES, 48 kHz Output Level: 0, -9, -12, -20 dBFS and silence, user-selectable Output Frequency: Fixed selections of 400 Hz, 1 kHz, and 10 kHz
Interface Connector
1 x RJ45, 10/100 Base-T Ethernet port
Network Interface
IEEE 802.3 (Ethernet), 10/100 Base-T for web browser control
Typical Applications
SMPTE RP 184-2004, SMPTE RP 165-1994, SMPTE RP 219, SMPTE 259M, SMPTE 272M, SMPTE 274M-2005, SMPTE 291M, SMPTE 292M-2006, SMPTE 295M, SMPTE 296M, SMPTE 299M, SMPTE 318M, SMPTE 352M, SMPTE 372M, SMPTE 424M, SMPTE 425M AB, SMPTE RP 184-2004, SMPTE RP 165-1994, SMPTE RP 219, SMPTE 318M, AES3-2003, AES11-2003
Power Requirements
15 VDC nominal (11 to 18 VDC)
Power Connector
4-pin XLR, power input
Temperature
Operating: 32° to 122° F (0° to 50° C) Storage:- 22° to 149° F (- 30° to 65° C)
Humidity
Operating: 20% to 80% (non-condensing) Non-operating: 5% to 90% (non-condensing)
Dimensions
1.75 x 8.5 x 6.60" (4.45 x 21.59 x 16.76 cm)
Weight
1.66 lb (0.753 kg)
The user manual for the Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI can be downloaded in .pdf
format if it did not come with your new video & audio signal generators, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Imagine Communications users keep a unique electronic library
for Imagine Communications video & audio signal generatorss,
where you can use our link to download the user manual for the Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI.
The user manual lists all of the functions of the Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI,
all the basic and advanced features and tells you how to use the video & audio signal generators.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Imagine Communications service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI. User manuals are also
available on the Imagine Communications website under Professional Video - Signal Processing & Distribution - Video & Audio Signal Generators.
Question and answer discussion forum concerning user instructions and resolving problems with the Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the Imagine Communications Videotek CMVS-DVI Compact HAR-CMVS-DVI - no comments have been made yet - be the first to add a comment