In-Line Mic Accessories Schoeps User manual

Instruction manual - In-Line Mic Accessories Schoeps

Pro Audio - Recording - In-Line Mic Accessories - Instructions for use

Schoeps LP 40 U Active Low-Pass Filter LP 40 U The Schoeps LP 40 U Active Low-Pass Filter is designed for use with phantom-powered microphones. The low-frequency response of any directional microphone is inherently inferior to that of omnidirectional (pressure) microphones. Wh... Schoeps LC 120 U Active Low-Cut Filter LC 120 U The Schoeps LC 120 U Active Low-Cut Filter is an electronic filter that can be inserted anywhere in the microphone cable path. Under extreme conditions the LC 120 U can be used, though it may have an audible effect on the sound of... Schoeps LC 60 U Active Low-Cut Filter LC 60 U The Schoeps LC 60 U Active Low-Cut Filter is an electronic filter that can be inserted anywhere in the microphone cable path. With a roll-off of 18 dB / octave, the LC 60 U suppresses low-frequency acoustic interference such as wi... Schoeps DMS Splitter Box for Double-M/S DMS SPLITTER BOX The Schoeps DMS Splitter Box for Double-M/S Microphone Set adapts an XLR-7 cable to two M/S matrices and a center socket. This passive device simplifies connecting a double M/S microphone array to the phantom-powered inputs of pre... Schoeps Mini-DA42 Digital Microphone Powering Box and MINI-DA42 The Mini-DA42 Digital Microphone Powering Box and D/A Converter by Schoeps provides power for digital microphones and has been designed especially with the Schoeps SuperCMIT in mind. It converts digital output to analog signals fo... Schoeps PSD 2U Digital Phantom Power Box PSD 2U The PSD 2U Digital Phantom Power Box by Schoeps provides 10 volt digital phantom power (DPP) for digital microphones with AES42 output connectors. It's an ideal solution for connecting these mics to input devices such as digital c... Schoeps MDZ10U -10dB Pad for Condenser Microphones MDZ 10 U The Schoeps MDZ10U -10dB Pad is an in-line attenuator for phantom powered condenser microphones. The pad simply installs between the microphone cable and amplifier. It provides -10dB of attenuation and eliminates distortion due to...