|
User manual for Interlogix S731DV Video / Data Transmitter & S731DVPKG
- Manufacturer: Interlogix
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Signal Extenders
- Safety instructions
- Startup and operation of the signal extenders
- Tips for setting up your Interlogix
- Settings and expert assistance
- Contact Interlogix service
- Troubleshooting
- Warranty information
- Price: 959 USD
|
We recommend checking out our discussion threads on the Interlogix S731DV Video / Data Transmitter & S731DVPKG,
which address similar problems with connecting and setting up Signal Extenders Interlogix.
|
User manual for the Interlogix S731DV Video / Data Transmitter & S731DVPKG
The user manual for the Interlogix S731DV Video / Data Transmitter & S731DVPKG provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
The General Electric S731DV Video / Data Transmitter & Receiver Package (Standalone) features a standalone multimode transmitter, a standalone multimode receiver and 2 power supplies. The transmitter converts analog baseband composite video to 8-bit digital format. It transmits the converted video over 1 or 2 fibers to the receiver, and accepts return multiprotocol data that allows PTZ cameras at the camera station to be controlled remotely.
Support for major video formats allows the system to be retained even if there is a change of video control systems. The transmitter supports relay/contact closure from the camera station to the control station. The data translation function allows conversion of data from one format to another. Data formats can be set during installation and then be changed easily in the field via rotary switch.
Featuring 6.5 MHz video bandwidth and video SNR greater than 55 dB, the transmitter sends clear, high-quality images at resolutions of up to 520 TVL over an operating distance up to 3.2 miles (5.2 km). Optical Automatic Gain Control (OAGC) helps compensate for loss in signal strength. SMARTS diagnostic technology features a video test pattern generator that allows failures to be identified from the monitor. In addition, the transceiver features LEDs that give a visual indication of the system status. Featuring a polycarbonate construction, the transmitter comes in a standalone configuration and offers solid-state short circuit protection. The S731DV comes with 2 power supplies, each supporting 100-240 VAC input power and operating at 18 W.
|
If you own a Interlogix signal extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Interlogix S731DV Video / Data Transmitter & S731DVPKG in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Interlogix S731DV Video / Data Transmitter & S731DVPKG:
| Channels | 1 simplex | | Format | NTSC and PAL | | I/O | 1.0 V pk - pk composite | | Bandwidth | 6.5 MHz | | SNR | >55 dB | | Video Resolution | 520 TVL | | I/O Impedance | 75 ohms | | Differential Phase | <3° | | Differential Gain | 3% | | Channels | 1 simplex (RX to TX) | | Formats | RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire), Manchester, Biphase, SensorNet | | Baud Rate | 250 kbps to 512 kbps (depending on data format) | | Relay/Contact Closure | 1 simplex channel (TX to RX) | | Relay/Contact Rating | 0.5 A at 30 VDC | | Bit Error Rate | <1.0E-9 | | Mode | Multimode | | Optical Budget | 13 dB | | Emitter Outputs | LED | | Wavelength | 850 nm and/or 1300 nm | | Operating Distance | Up to 3.2 miles (5.2 km) | | Gain Control | Optical Automatic Gain Control (OAGC) | | Others | Launch Power: -15 dBm Receiver Sensitivity: -28 dBm | | Input Power | 24 VAC or 13.5 VDC regulated | | Current Requirements | 450 mA | | Power Consumption | 6 W | | Protection | Solid-state short circuit protection | | Operating Temperature | -40 to 167°F (-40 to 75°C) | | Humidity | 95% relative, noncondensing (maximum) | | Construction | Polycarbonate | | Weight | 1.20 lb (0.55 kg) | | Dimensions | 5.0 x 4.8 x 1.5" (12.7 x 12.2 x 3.8 cm) | | Input Power | 100 - 240 VAC, 60/50 Hz | | Output Voltage | 13.5 VDC regulated | | Output Current | 1.3 A Maximum | | Power Consumption | 18 W | | Connection | Connects to standard wall outlet | | Weight | 0.79 lb (0.36 kg) | | Dimensions | 1.27 x 2.3 x 4.35" | |
The user manual for the Interlogix S731DV Video / Data Transmitter & S731DVPKG can be downloaded in .pdf
format if it did not come with your new signal extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Interlogix users keep a unique electronic library
for Interlogix signal extenderss,
where you can use our link to download the user manual for the Interlogix S731DV Video / Data Transmitter & S731DVPKG.
The user manual lists all of the functions of the Interlogix S731DV Video / Data Transmitter & S731DVPKG,
all the basic and advanced features and tells you how to use the signal extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Interlogix service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Interlogix S731DV Video / Data Transmitter & S731DVPKG. User manuals are also
available on the Interlogix website under Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the Interlogix S731DV Video / Data Transmitter & S731DVPKG - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Interlogix S731DV Video / Data Transmitter & S731DVPKG
|
|
|
|
|
