PDF-MANUALS.com | User manual here!
User manual

User manual Joemeek oneQ2 Master Studio Channel ONEQ2

Operating instructions and pdf manual for use - Joemeek oneQ2 Master Studio Channel ONEQ2 User manual, User manual Joemeek oneQ2 Master Studio Channel ONEQ2, Joemeek, oneQ2, Master, Studio, Channel, ONEQ2, Video


User manual for Joemeek oneQ2 Master Studio Channel ONEQ2

Joemeek  oneQ2 Master Studio Channel ONEQ2
  • Manufacturer: Joemeek
  • Basic description and contents of package
  • Product classification: Pro Audio - Recording - Channel Strips
  • Safety instructions
  • Startup and operation of the channel strips
  • Tips for setting up your Joemeek
  • Settings and expert assistance
  • Contact Joemeek service
  • Troubleshooting
  • Warranty information
  • Price: 1000 USD
We recommend checking out our discussion threads on the Joemeek oneQ2 Master Studio Channel ONEQ2, which address similar problems with connecting and setting up Channel Strips Joemeek.



User manual for the Joemeek oneQ2 Master Studio Channel ONEQ2

The user manual for the Joemeek oneQ2 Master Studio Channel ONEQ2 provides necessary instructions for the proper use of the product Pro Audio - Recording - Channel Strips.

The Joemeek oneQ2 Master Studio Channel is a mic preamp and channel strip that contains a suite of professional studio tools in a single, 2U chasis. An updated version of the orignal oneQ, it offers improved audio specifications, routing options, and metering.

Front- and rear-panel XLR mic inputs make session setup easy. Other input options include a front-panel instrument input, and a rear-panel line input. The transformer-coupled preamp is equipped with a high-end Cinemag transformer. Adjust the amount of amplification with the Preamp Gain control, and eliminate rumble, pops, and handling noise with a switchable high-pass filter. By activating the IRON switch, you can route line input through the transformer

The oneQ2 sports an optical compressor that includes Compress (threshold), Slope (ratio), Attack, Release, and Makeup Gain controls. The Comp Link button and it corresponding rear-panel jack make it possible to link up a second oneQ2 when recording stereo sources.

The 4-band "Meequalizer" EQ can be switched in or out of the signal chain. The low-frequency and high frequency are each switchable between two center frequencies, and the low-mid and high-mid bands have sweepable frequency ranges. The front-panel Post EQ switch moves the compressor from before the EQ in the signal chain to after.

The Enhancer section is designed to add clarity but not extra gain to the input signal. Controls include Effect, which sets amount of the Enhancer; Range, for setting the frequency above which the effect is applied; and Q, which adds a resonant peak at the Range frequency.

Turn on the De-Esser effect to reduce sibalence in vocals. It lets you adjust the gain-reduction frequency; listen to the output of the sidechain filter, and adjust the threshold above which reduction is applied. A large and accurate VU meter can be set to display output level, preamp level, or gain reduction.

The oneQ2's outputs include XLR and 1/4" analog line outs, as well as AES/EBU, S/PDIF, and optical digital outputs. Wordclock input and output jacks on BNC connectors allow for synchronization with external clock sources or devices.
If you own a Joemeek channel strips and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the Joemeek oneQ2 Master Studio Channel ONEQ2 in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Joemeek oneQ2 Master Studio Channel ONEQ2:
Specifications
    Preamp
    Number of Channels Single
    Inputs 2 x XLR Microphone (transformer balanced)
    1 x 1/4" TRS Line(balanced)
    1 x 1/4" TS Instrument(balanced)
    1 x 1/4" TRS Channel 2 Analog Input(balanced)
    Input Impedances Mic: 1.2kΩ
    Line: 20kΩ
    Preamp Overall Gain -10 to 60 dB
    Common Mode Rejection 70 dB
    Equivalent Input Noise -128.5 dBu (unweighted)
    Frequency Response 15 Hz to 70 kHz (-3 dB)
    Maximum Input Before Clipping +21 dBu; Line: +45 dBu
    Distortion 0.001% (below Compressor threshold)
    Headroom Before Clipping +21 dBu
    Pad 20 dB attenuation
    High-Pass Filter 12 dB per octave cut below 80 Hz
    Phantom Power 48 V (switchable)
    Analog Outputs 1 x XLR (balanced)
    1 x 1/4" TRS (balanced, switchable between +4 dBu and -10 dBv) Nominal Output Levels +4 dBu/-10 dBv
    Nominal Output Levels +4 dBu/-10 dBv
    Output Impedance Output Impedance: 75Ω
    Output Level Switch 12 dB attenuation
    Noise Floor -85 dBu (typical, with -40 dB mic gain)
    VU Meter Analog movement
    Insert 1 x 1/4" TRS Send and Return
    Compressor
    Threshold Range -6 dBu to +22 dBu (variable)
    Ratio 1:1 to 10:1 (variable)
    Attack Time 1 to 100 ms (adaptive)
    Release Time 0.1 to 3 sec (adaptive)
    Equalizer
    Range (Boost/Cut) ±15 dB on all bands (bell response)
    Frequency Bands Low Frequency: 80/120 Hz (switchable)
    Low-Mid Frequency: 200 Hz to 2 kHz (variable)
    High-Mid Frequency: 1 to 6 kHz (variable)
    High Frequency: 7/14 kHz(switchable)
    Q 0.9 (1.6 octaves)
    Digital Interface
    Sampling 24-bit
    Resolution 24-bit delta sigma using Wolfson WM8738 ADC
    Sampling Rate 44.1, 48, 88.2, or 96 kHz (selectable)
    Output Formats AES3 compliant (balanced), S/PDIF electrical
    Oversampling 2.4 x sample frequency
    Noise Floor Typically 92 dB A-weighted (referenced to 0 dBFS = +18 dBu). For a +4 dBu signal, the SNR is 78 dB
    Distortion Typically 0.01% @ 0 dBu (20 Hz - 20 kHz) at 96 kHz sample rate Typically 0.02% @ 0 dBu (20 Hz - 20 kHz) at 48 kHz sample rate Typically 0.02% @ -1 dBFS (2 0Hz - 20 kHz) at all sample rates
    External Wordclock Input 75Ω, 1.25 V - TTL level, 44.1 kHz to 96 kHz (auto synchronising)
    Wordclock I/O 1 x BNC Input 1 x BNC Output
    Crosstalk Typically -67 dB (20 Hz - 20 kHz)
    Power
    Power Supply 115V/230V AC mains, 50/60 Hz
    Power Consumption 30 W
    Physical
    Dimensions (WxDxH) 19 x 8.7 x 3.5" (482 x 220 x 88 mm)
    Weight 6.6 lb (3 kg)
    Packaging Info
    Package Weight 10.8 lb
    Box Dimensions (LxWxH) 24.2 x 10.8 x 5.3"
    The user manual for the Joemeek oneQ2 Master Studio Channel ONEQ2 can be downloaded in .pdf format if it did not come with your new channel strips, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other Joemeek users keep a unique electronic library for Joemeek channel stripss, where you can use our link to download the user manual for the Joemeek oneQ2 Master Studio Channel ONEQ2.

    The user manual lists all of the functions of the Joemeek oneQ2 Master Studio Channel ONEQ2, all the basic and advanced features and tells you how to use the channel strips. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from Joemeek service.

    If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the Joemeek oneQ2 Master Studio Channel ONEQ2. User manuals are also available on the Joemeek website under Pro Audio - Recording - Channel Strips.



    Discussion Question and answer discussion forum concerning user instructions and resolving problems with the Joemeek oneQ2 Master Studio Channel ONEQ2 - no comments have been made yet - be the first to add a comment

    Post new comment/question/response regarding the Joemeek oneQ2 Master Studio Channel ONEQ2

    Fields marked with * must be filled out.
    Your name *:
    E-mail :
    Subject *:
    Message text *:
    Enter the code *:
    (spam block)
    "manual"
    If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

     

    Can't find what you're looking for? Try Google Search!



    Current discussions
    Most recently discussed products:

    Manual MU118 - Rolls MU118 Digital Multimeter MU118
    Posted by: Benito Camela Vergara
    2024-04-19 17:10:17

    Manden el manual de servicio y el de usuario...
    Ripple after runing - Drytac JM55 Force JetMounter Electric Laminator JM55-FORCE
    Posted by: Project Printed
    2024-04-19 16:06:58

    The laminate continues to ripple after running. Can’t we to do long runs without the laminate rippling and causing damage to print. ...
    Sigma manual - Sigma 70-300mm f/4-5.6 APO DG Macro Lens for Nikon AF-D 5A8306
    Posted by: Ash
    2024-04-17 16:17:29

    Do you have a manual for the sigma 70-300 lens ass suggested on this page...
    Please, send me the user manual - Ibanez M510E A-Style Acoustic/Electric Mandolin M510BS
    Posted by: Jaroslav Bodnar
    2024-04-15 15:18:12

    Please, send me the user manual for Ibanez M510E-BS Mandolin in PDF. Thak You!...
    Vortex 8x42 HD Talon binocular Manual - Vortex Talon HD 8x42 Roof Prism Binocular TLN-4208-HD
    Posted by: Pierre Gagnon
    2024-04-12 23:06:37

    Would like your PDF manual. Thanks for this convenience. Fantastic binocular....

    Uploaded instruction manuals
    Upload a link to an instruction manual for a depicted product here:

    Link format "http://www.link2manual.com/manual.pdf"

    Enter the code: "manual"






    PDF-MANUALS.com - Community administered database of instructions for use and PDF User manual
    sitemap.txt alx