|
User manual for Joemeek sixQ2 Studio Channel SIXQ2
- Manufacturer: Joemeek
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Channel Strips
- Safety instructions
- Startup and operation of the channel strips
- Tips for setting up your Joemeek
- Settings and expert assistance
- Contact Joemeek service
- Troubleshooting
- Warranty information
- Price: 660 USD
|
We recommend checking out our discussion threads on the Joemeek sixQ2 Studio Channel SIXQ2,
which address similar problems with connecting and setting up Channel Strips Joemeek.
|
User manual for the Joemeek sixQ2 Studio Channel SIXQ2
The user manual for the Joemeek sixQ2 Studio Channel SIXQ2 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Channel Strips.
The Joemeek sixQ2 Studio Channel is a single-rackspace, transformer-coupled mic preamp/channel strip with a wealth of studio features. An updated version of the original sixQ, it adds additional routing options, improved gain specs, and a high-end Cinemag transformer.
The sixQ2's preamp stage takes any mic or instrument source and amplifies it to the proper level for connection to a mixer or audio interface. By pressing the IRON switch, the line input can be routed through the transformer for a more colored sound. Having the line input makes it possible to send previously recorded tracks through the sixQ2 for processing.
You can adjust the amount of amplification using the Preamp Gain control. To control dynamics, turn on the optical compressor, which provides knobs for Compress (threshold), Slope (ratio), Attack, Release, and Make Up Gain. For tone shaping, press the EQ On button to switch in the 3-band "Meequalizer." It's equipped with sweepable low- and mid-frequency bands, and a high-frequency band that can be toggled between 6 and 12 kHz.
The Output Gain knob lets you adjust the level at the sixQ2's outputs. A 1/4" send-and-return jack makes it possible to patch an external processor into the signal chain between the compressor and the EQ.
Metering is provided via an 8-step LED bar graph that can be switched between displaying output and preamp levels. A separate display shows gain reduction. The Ø switch reverses the phase on all inputs.
The sixQ2 provides a comprehensive set of outputs. In the analog domain, you have a balanced XLR jack, and a 1/4" connector that can be switched between balanced (+4 dBU) and unbalanced (-10 dBv). Thanks to its built-in digital interface, the sixQ2 provides S/PDIF digital outputs on RCA and optical connectors.
|
If you own a Joemeek channel strips and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Joemeek sixQ2 Studio Channel SIXQ2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Joemeek sixQ2 Studio Channel SIXQ2:
| Number of Channels | Single | | Inputs | 1 x XLR Microphone (transformer balanced)
1 x 1/4" TRS phone Line (balanced)
1 x 1/4" TS phone Instrument (balanced)
1 x 1/4" TRS phone Channel 2 Analog Input (balanced) | | Insert | 1 x 1/4" TRS phone Send/Return (unbalanced) | | Analog Outputs | 1 x XLR (balanced)
1 x 1/4" TRS phone (balanced) | | Input Impedances | Mic: 1.2kΩ
Line: 10kΩ
Instrument: 2.2MΩ | | Preamp Overall Gain | -2 to 60 dB | | Equivalent Input Noise | -128.5 dBu (unweighted) | | Distortion | 0.001% (below compressor threshold) | | Frequency Response | 10 Hz to 70 kHz (-3 dB) | | Maximum Input Before Clipping | Mic: +24 dBu; Line: +45 dBu | | Headroom Before Clipping | +29 dBu | | Common Mode Rejection | 70 dB | | Pad | -20 dB | | Phantom Power | 48 V (switchable per channel) | | Nominal Output Levels | +4 dBu/-10 dBv | | Output Impedance | 75Ω | | Output Level Switch | 12 dB Attenuation | | Noise Floor | -85 dBu (typical, with -40 dB mic gain) | | VU Meter | 1 x 8-Segment LED Bargraph (switchable preamp/output level)
1 x 4-Segment LED Bargraph (gain reduction) | | Threshold Range | -6 dBu to +22 dBu (variable) | | Ratio | 1:1 to 10:1 (variable) | | Attack Time | 1 to 100 ms (adaptive) | | Release Time | 0.1 to 3 sec (adaptive) | | High-Pass Filter | 12 dB per octave, cut below 80Hz | | Q | 0.9 (1.6 octaves) | | Range (Boost/Cut) | ±15 dB On All Bands (bell response) | | Frequency Bands | Low-Frequency: 40 to 650 Hz (variable)
Mid-Frequency: 300 Hz to 5 kHz (variable)
High-Frequency: 6/12 kHz (switchable) | | Sampling | 24-bit | | Resolution | 24-bit delta sigma using Wolfson WM8738 ADC | | Sampling Rate | 44.1, 48, 88.2, or 96 kHz (selectable) | | Output Formats | S/PDIF Electrical, S/PDIF Optical | | Oversampling | 2.4 x Sample Frequency | | Noise Floor | Typically 92 dB A-weighted (referenced to 0 dBFS = +18 dBu). For a +4 dBu signal, the SNR is 78 dB | | Distortion | Typically 0.01% @ 0 dBu (20 Hz - 20 kHz) at 96 kHz sampling rate
Typically 0.02% @ 0 dBu (20 Hz - 20 kHz) at 48 kHz sampling rate
Typically 0.02% @ -1 dBFS (20 Hz - 20 kHz) at all sampling rates | | Crosstalk | Typically -67 dB (20 Hz - 20 kHz) | | Power Supply | 115 V/230 V AC Mains 50/60 Hz | | Power Consumption | 30 W | | Dimensions (WxDxH) | 19 x 8.7 x 3.5" (482 x 220 x 88) | | Weight | 6.6 lbs (3 kg) | | Package Weight | 8.8 lb | | Box Dimensions (LxWxH) | 24.0 x 10.8 x 3.6" | |
The user manual for the Joemeek sixQ2 Studio Channel SIXQ2 can be downloaded in .pdf
format if it did not come with your new channel strips, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Joemeek users keep a unique electronic library
for Joemeek channel stripss,
where you can use our link to download the user manual for the Joemeek sixQ2 Studio Channel SIXQ2.
The user manual lists all of the functions of the Joemeek sixQ2 Studio Channel SIXQ2,
all the basic and advanced features and tells you how to use the channel strips.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Joemeek service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Joemeek sixQ2 Studio Channel SIXQ2. User manuals are also
available on the Joemeek website under Pro Audio - Recording - Channel Strips.
Question and answer discussion forum concerning user instructions and resolving problems with the Joemeek sixQ2 Studio Channel SIXQ2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Joemeek sixQ2 Studio Channel SIXQ2
|
|
|
|
|
