|
User manual for K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I
- Manufacturer: K-Array
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - PA Speakers
- Safety instructions
- Startup and operation of the pa speakers
- Tips for setting up your K-Array
- Settings and expert assistance
- Contact K-Array service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I,
which address similar problems with connecting and setting up PA Speakers K-Array.
|
User manual for the K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I
The user manual for the K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - PA Speakers.
The KMT12 Mark I 1200W Powered Subwoofer with DSP from K-array is a complete audio system, featuring a 12” powered subwoofer, programmable on-board DSP, and multiple analog and digital inputs & outputs for creating a broad range of speaker configurations. Equipped with a codec that lowers the signal/noise ratio, the KMT12 Mark I Subwoofer comes with a 5 VDC power connector on the rear panel, and enhanced functionality for creating presets. The output AES/EBU is latency free (thru).
|
If you own a K-Array pa speakers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I:
Power Handling | 700 W | Maximum Power | 1200 W | Impedance | 8 ohms | Frequency Range | 45 Hz to 150 Hz | SPL | 1 W : 96 dB Maximum: 125 dB (cont.) to 131 dB (peak) | Type | 1 module class-D (DSP controlled) | Subwoofer Power Output | 1000 W @ 8ohms, 1% THD + NOISE | Speaker Power | Output: 1000 W @ 8 ohms, 1% THD + NOISE | Protections | Over Temperature (Power Limiting - Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection | Frequency Response | 20 Hz to 20 kHz (+0 -1 dB) for 1 W @ 8 ohms | Horizontal/Vertical | Omnidirectional | Type | Internal DSP controlled | Frequency | Low pass @ 150 Hz (maximum - preset dependent) | Type | 1 X 12" (30.5 cm) Neodymium magnet woofer with 3" (7.6 cm) voice coil | Connectors | Analog: 2 male + 2 female 3-pin balanced XLR Digital: 1 male + 1 female 3-pin balanced XLR | Connectors | 1 male + 1 female XLR parallel 1 USB B Jack serial converter | Power Input | 100 to 240 VAC at 50 to 60 Hz | Operating Range | 85 to 265 VAC (auto-range) | Consumption | 1/8 rated power @ 8 ohms: 300 W | IP | 20 (53 with K-AMPCOVER accessory) | Dimensions | 13 x 13 x 17" (33 x 33 x 43 cm) | Weight | 34.4 lb (15.6 kg) | |
The user manual for the K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I can be downloaded in .pdf
format if it did not come with your new pa speakers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other K-Array users keep a unique electronic library
for K-Array pa speakerss,
where you can use our link to download the user manual for the K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I.
The user manual lists all of the functions of the K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I,
all the basic and advanced features and tells you how to use the pa speakers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from K-Array service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I. User manuals are also
available on the K-Array website under Pro Audio - Live Sound - PA Speakers.
Question and answer discussion forum concerning user instructions and resolving problems with the K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the K-Array KMT12 Mark I 12" 1200W Powered Subwoofer KMT12 I
|
|
|
|
|