PDF-MANUALS.com | User manual here!
User manual

User manual Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT

Operating instructions and pdf manual for use - Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT User manual, User manual Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT, Korg, MS-20, Kit, Monophonic, Analog, Synthesizer, K


User manual for Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT

Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT
  • Manufacturer: Korg
  • Basic description and contents of package
  • Product classification: Pro Audio - Musical Instruments - Synthesizer Keyboards
  • Safety instructions
  • Startup and operation of the synthesizer keyboards
  • Tips for setting up your Korg
  • Settings and expert assistance
  • Contact Korg service
  • Troubleshooting
  • Warranty information
We recommend checking out our discussion threads on the Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT, which address similar problems with connecting and setting up Synthesizer Keyboards Korg.



User manual for the Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT

The user manual for the Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT provides necessary instructions for the proper use of the product Pro Audio - Musical Instruments - Synthesizer Keyboards.

The MS-20 Kit from Korg is a kit for self-assembling a real MS-20 synthesizer according to the directions given in the owner's manual. Assembly does not require knowledge of soldering or electronic circuitry, since most of the steps consist of simply tightening screws or fitting parts together. The MS-20 Kit is a full-size unit with a standard-sized keyboard, and full sized 1/4" phone plugs.

A development team led by the original engineers strove to painstakingly replicate the MS-20, both in sound and form. The sound comes from an architecture featuring two oscillators (one with ring modulation) and envelope generators with hold and delay. The VCA (Voltage Controlled Amplifier) maintains the basic design of the original.

The original MS-20 used different VCF circuits depending on the date of production, with earlier units featuring a filter noted for its distinctive distortion and self-oscillation, while the filters used in later units had a low-noise design with a mellower character. The kit includes both filters allowing you to switch between the two by moving a jumper on the circuit board.

The External Signal Processor (ESP) allows for using the pitch or volume of an external audio source to control the synthesizer. You can input an electric guitar and use the MS-20 kit as a guitar synthesizer, or connect a microphone for use as a vocal synthesizer. A flexible patching system is provided that allows for creating different modulation routing, and by following the front panel printed flow chart, even beginners can take advantage of these patching possibilities right away.

The synthesizer features a MIDI In jack for receiving note messages, and a USB-MIDI connector that can transmit and receive note messages (there is no velocity information). Connecting the unit to a computer allows it to be triggered from a sequencer.
If you own a Korg synthesizer keyboards and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT:
Specifications
    Keyboard 37-note keyboard
    Main Controller Control wheel (center click)
    Momentary switch -->GND
    Polyphony Monophonic
    Multitimbral No
    Synthesis Method Voltage controlled analog
    Control Section Voltage Controlled Oscillator 1 (VCO 1)
    Scale: 32, 16, 8, 4' (6 octaves, +cent, -cent)
    Waveform: Triangle, Sawtooth, PW-Square, White Noise, (x 4 modes)
    Pulse Width Adjust: 1:1 to 1:Infinity

    Voltage Controlled Oscillator 2 (VCO 2)
    Scale: 16, 8, 4, 2' (6 octaves, +cent, -cent)
    Waveform: Sawtooth, Square, Pulse, Ring Modulator, (x 4 modes)
    Pitch: +/-1 Octave

    VCO Master Control
    Master Tune: +/- 100 cents
    Portamento: Maximum 10 s
    Frequency Modulation Intensity by MG/T.EXT: -5V to +5V
    Frequency Modulation Intensity by EG1/EXT: -5V to 0V

    VCO Mixer
    VCO 1 Level
    VCO 2 Level

    Voltage Controlled High Pass Filter (VCF HPF)
    Cutoff Frequency: 50 Hz to 15 kHz
    Peak: Flat to self OSC
    Cutoff Frequency Modulation Intensity by MG/T.EXT: -5V to +5V
    Cutoff Frequency Modulation Intensity by EG2/EXT: -5V to +5V

    Voltage Controlled Low Pass Filter (VCF LPF)
    Cutoff Frequency: 50 Hz to 15 kHz
    Peak: Flat to self OSC
    Cutoff Frequency Modulation Intensity by MG/T.EXT: -5V to +5V
    Cutoff Frequency Modulation Intensity by EG2/EXT: -5V to +5V

    Envelope Generator 1
    Delay Time: 10 s
    Attack Time: 10 s
    Release Time: 10 s

    Envelope Generator 2
    Hold Time: 20 s
    Attack Time: 10 s
    Decay Time: 10 s
    Sustain Time: 10 s
    Release Time: 10 s

    Modulation Generator (LFO)
    Waveform: Positive Sawtooth - Triangle - Negative Sawtooth, Wide Pulse - Square - Narrow Pulse
    Frequency: 0.1 Hz to 20 Hz

    Manual Controller
    Control Wheel (center click)
    Momentary Switch --> Ground

    Power switch and Volume
    Volume

    Indicators
    Keyboard Trigger LED
    Modulation Generator Rate LED
    Power On LED
    External Signal Processor Control Section
    Input Signal Level
    Low Cut Frequency: 50 Hz to 2.5 kHz
    High Cut Frequency: 100 Hz to 5 kHz
    CV Adjust
    Threshold Level

    Input and Output
    Signal In
    Amplifier Out
    Band Pass Filter Out
    CV Out: 0 to +8.4V
    ENV Out: 0 to +5V
    Trig Out: +5V --> Ground

    Indicators
    Peak Indicator LED
    Trigger Indicator LED
    Patch Panel Keyboard
    Keyboard Control Voltage Output (Exponential): 0 to +8V
    Keyboard Trigger Output: +5V --> Ground
    VCO-1 + VCO-2 Control Voltage Input (Linear Response): 0 - +8V
    VCO-2 Control Voltage Input (Linear Response): 0 - +8V

    VCO
    VCO-1 + VCO-2 External Frequency Control Input (Oct/V): -5V to +5V

    VCF
    External Signal Input: 3Vp-p maximum
    External High Pass Filter Cutoff Frequency Control Input (2 Oct/V): -5V to +5V
    External Low Pass Filter Cutoff Frequency Control Input (2 Oct/V): -5V to +5V

    VCO + VCF
    Total External Modulation Input (T.EX): -5V to +5V

    VCA
    External Initial Gain Control Input: 0 to +5V

    EG
    EG 1 Envelope Signal Normal Output: -5V to 0V
    EG 1 Envelope Signal Reverse Output: +5V to 0V
    EG 1 + EG 2 Trigger Input: --> Ground
    EG 1 Trigger Input: --> Ground
    EG 2 Envelope Signal Reverse Output: +5V to 0V

    MG
    Triangle Output: Positive Sawtooth - Triangle - Negative Sawtooth (5Vp-p)
    Rectangle Output: Wide Pulse - Square - Narrow Pulse (0 to +5V)

    Noise Generator
    Pink Noise Output: 5Vp-p
    White Noise Output: 5Vp-p

    Sample and Hold
    Clock Trigger Input: --> Ground
    Sample Signal Input: 5Vp-p maximum
    S/H Output: 5Vp-p maximum

    Modulation VCA
    Control Voltage Input: 0 to +5V)
    Signal Input: -5V to +5V
    Signal Output: -5V to +5V

    Manual controller
    Control Wheel Output: -5V <-- 0v --> +5V
    Momentary Switch Output: --> Ground
    Connectors 1 x 1/4" TS Signal Output (2Vp-p, output impedance 3.5kΩ)
    1 x 1/4" TS External Signal Input
    1 x 1/4" TRS Headphone (33Ω 48mW)
    12V DC
    1 x 5-pin DIN MIDI In*
    1 x USB Type B**
    * Only note messages received (velocity not used)
    ** Only note messages transmitted and received (velocity not used)
    Power Requirements 12V DC via included external power supply
    9W consumption
    Dimensions (WxDxH) 22.6 x 12.4 x 9.8" (573 x 316 x 248 mm)
    Weight 13.9 lb (6.3 kg)
    The user manual for the Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT can be downloaded in .pdf format if it did not come with your new synthesizer keyboards, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other Korg users keep a unique electronic library for Korg synthesizer keyboardss, where you can use our link to download the user manual for the Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT.

    The user manual lists all of the functions of the Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT, all the basic and advanced features and tells you how to use the synthesizer keyboards. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from Korg service.

    If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT. User manuals are also available on the Korg website under Pro Audio - Musical Instruments - Synthesizer Keyboards.



    Discussion Question and answer discussion forum concerning user instructions and resolving problems with the Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT - no comments have been made yet - be the first to add a comment

    Post new comment/question/response regarding the Korg MS-20 Kit - Monophonic Analog Synthesizer Kit MS-20 KIT

    Fields marked with * must be filled out.
    Your name *:
    E-mail :
    Subject *:
    Message text *:
    Enter the code *:
    (spam block)
    "manual"
    If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

     

    Can't find what you're looking for? Try Google Search!



    Current discussions
    Most recently discussed products:

    User's manuals downloading help - Linhof Compendium Lens Shade Master Technika 1926
    Posted by: Jean-Louis LLECH
    2024-03-28 18:30:04

    Hi, I am 75 years old, I live in Beauvais, France. I was during 43 years a S.E. in the french civil service of Equipment and Housing, now retired. I have been practicing photography for over half a century. I mostly use Large and Medium Format f...
    Simmons 6-24x50 - Simmons 6-24x50 Predator Varmint Riflescope 656245
    Posted by: Stuart Williams
    2024-03-26 12:36:48

    I have located manual for this on your site but how do I download / print it please ?...
    USER MANUAL TSP2 17 BUN - Telmax TSP2-17-BUN Dual 17" Presidential TSP2-17BUN
    Posted by: AYO
    2024-03-26 10:07:35

    MANUAL REQUIRED TO SET UP...
    lens servo - Fujinon ESM-15A-SA Digital Servo Unit for Fujinon ESM-15A-SA
    Posted by: julia yoko
    2024-03-25 22:07:20

    i would like to know where the lens manual can be found...
    NEPVS14-17 - ITT Night Enforcer PVS-14 Pinnacle Night Vision ITTE-NEPVS14-17
    Posted by: Keller Bradshaw
    2024-03-25 17:57:35

    Hi, I would like a user manual for the NEPVS14-17...

    Uploaded instruction manuals
    Upload a link to an instruction manual for a depicted product here:

    Link format "http://www.link2manual.com/manual.pdf"

    Enter the code: "manual"






    PDF-MANUALS.com - Community administered database of instructions for use and PDF User manual
    sitemap.txt alx