|
User manual for Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212
- Manufacturer: Lectrosonics
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Networked Audio Systems
- Safety instructions
- Startup and operation of the networked audio systems
- Tips for setting up your Lectrosonics
- Settings and expert assistance
- Contact Lectrosonics service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212,
which address similar problems with connecting and setting up Networked Audio Systems Lectrosonics.
|
User manual for the Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212
The user manual for the Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Networked Audio Systems.
The DNT0212 from Lectrosonics is a processor that subscribes to channels on a Dante network and delivers them to an internal digital matrix for automatic mixing and processing, and to Dante network transmit channels. In addition, two analog line level inputs are provided for use with local audio sources such as voice evacuation announcements.
The outputs of the matrix can be assigned to a Dante transmit channel, an analog output and/or routed back to an input to be further mixed and processed with another input channel or matrix mix.
|
If you own a Lectrosonics networked audio systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212:
| Audio Inputs | (Balanced microphone/line level inputs with digitally programmable gain may be configured as unbalanced inputs)
Audio Input Channels
Digital: 32 Dante channels
Analog: 2 line level analog (for paging)
Gain: -20 dB to +20 dB
Impedance: 15kΩ differential, 3.75kΩ common
Maximum Analog Input Level: 20 dBu
Dynamic Range: 102 dB
THD + Noise: 0.01%
A-D Sampling Rate: 48 kHz, fixed | | Audio Outputs | Digital: 16 Dante transmit channels
Analog: 12 channels
Level: 0 dBu nominal
Impedance: <50Ω source to drive 600Ω minimum load
Channels 9~12 include 20 dB and 40 dB attenuators | | Dante Interface | Provides dual RJ-45 connectors on the rear panel and an Ethernet switch built into the processor
Supported Sampling Rate: 48 kHz
Data Rate LED: 100 Mbps/1 Gbps
Activity LED: Blinks when active
Modes of Operation
Switched mode using either connector
Redundant mode with primary and secondary networks using both connectors | | Network Connectivity | Dante interface and Ethernet control can be connected to the same network | | Filters | All filters have zero processing delay
EQ Stages: 4 per input channel | | Internal Signal Generator | Swept Sine
Modes: Single sweep, continuous sweep
Waveforms: Sawtooth (up or down), triangle
Sweep Rate: Linear, logarithmic
Parameters: Start freq, stop freq, level (dBu), sweep time (sec)
White Noise Parameter: Level (dBu)
Pink Noise Parameter: Level (dBu)
Tone (Sine Wave) Parameters: Level (dBu), frequency | | Filter Type | Low Pass
Butterworth 6, 12, 18, 24 dB/octave
Bessel 6, 12, 18, 24 dB/octave
Linkwitz-Riley 12, 24 dB/octave
Additional Parameters: Frequency (Hz)
High Pass
Butterworth 6, 12, 18, 24 dB/octave
Bessel 6, 12, 18, 24 dB/octave
Linkwitz-Riley 12, 24 dB/octave
Additional Parameters: Frequency (Hz)
Low Shelving
Butterworth 6, 12, 18, 24 dB/octave
Bessel 6, 12, 18, 24 dB/octave
Additional Parameters: Frequency (Hz), boost/cut (dB)
High Shelving
Butterworth 6, 12, 18, 24 dB/octave
Bessel 6, 12, 18, 24 dB/octave
Additional Parameters: Frequency (Hz), boost/cut (dB)
Peaking EQ Parametric
Parameters: Frequency (Hz), bandwidth (octave), boost/cut (dB) | | Compressor | Soft knee with RMS level detector eliminates need for separate attack and delay settings
0.1 ms increments
1 second maximum
Continuously adjustable ratio | | Power Requirements | 100~240 VAC, 50/60 Hz 20 W maximum consumption | | Dimensions (WxDxH) | 19 x 7.7 x 1.75" (483 x 196 x 44 mm) | | Weight | 5.3 lb (1.7 kg) | | Package Weight | 1.3 lb | | Box Dimensions (LxWxH) | 25.0 x 15.0 x 7.0" | |
The user manual for the Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212 can be downloaded in .pdf
format if it did not come with your new networked audio systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Lectrosonics users keep a unique electronic library
for Lectrosonics networked audio systemss,
where you can use our link to download the user manual for the Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212.
The user manual lists all of the functions of the Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212,
all the basic and advanced features and tells you how to use the networked audio systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Lectrosonics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212. User manuals are also
available on the Lectrosonics website under Pro Audio - Installation Sound - Networked Audio Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Lectrosonics DNT0212 - Dante 2 In/12 Out Network DNT0212
|
|
|
|
|
