User manual Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB
Operating instructions and pdf manual for use - Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB User manual, User manual Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB, Lynx, Studio, Technology, Aurora, 16, LT-USB, AD/DA, A
User manual for Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB
Manufacturer: Lynx Studio Technology
Basic description and contents of package
Product classification: Pro Audio - Computer Audio - AD/DA Converters
Safety instructions
Startup and operation of the ad/da converters
Tips for setting up your Lynx Studio Technology
Settings and expert assistance
Contact Lynx Studio Technology service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB,
which address similar problems with connecting and setting up AD/DA Converters Lynx Studio Technology.
User manual for the Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB
The user manual for the Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - AD/DA Converters.
The Lynx Aurora 16 LT-USB AD/DA Convertor is an analog to digital/digital to analog convertor that provides digital input and output to computers via its USB 2.0 port. It features 16 channels of analog I/O at up to 24-bit and 96kHz.
The Aurora 16 LT-USB offers a variety of control for its parameters. Its front panel provides you access to settings for sample rate, sync source, routing, and metering. The included Aurora Remote Control, or ARC, software allows you to adjust the trim settings of individual inputs. It also gives you control over the input and output routing of the Aurora 16 LT-USB, acting as a built-in digital mixer for the unit.
Designed to provide you with accurate conversion, the Aurora 16 LT-USB has Lynx's proprietary SynchroLock word clock integrated into the unit. SynchroLock provides the Aurora with reduced jitter from the USB bus input, which results in more accurate audio signals being converted. The unit has no EQ or limiting functions in order to preserve the sound going into the device.
If you own a Lynx Studio Technology ad/da converters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB:
Specifications
Analog Inputs
2x 25-pin female D-sub connectors 16 inputs (8 in dual-wire mode) Analog in 1 to 8 Analog in 9 to 16 Tascam pin-out standard
Input Impedance
Balanced mode: 24k Ω Unbalanced mode: 12k
Analog Outputs
2x 25-pin female D-sub connectors Analog out 1 to 8 Analog out 9 to 16 Tascam pin-out standard
Output Impedance
Balanced mode: 100 Ω Unbalanced mode: 50 Ω
Digital I/O
2x 25-pin female D-sub connectors Port A: channels 1 to 8 I/O Port B: channels 9 to 16 I/O Yamaha pin-out standard 24-bit AES/EBU format, transformer coupled
Level
4 dBu nominal / 20 dBu maximum Or -10 dBV nominal / 6 dBV maximum
Output
Driver: 600 Ω, 0.2 μF capacitance
System Requirements
Mac: OSX 10.6.4 and up Windows: XP, Vista (32 or 64-bit) or Windows 7 (32 or 64-bit) USB port
A/D Conversion
Type: 24-bit multi-level, delta-sigma
Sample Rates
All standard rates and variable rates up to 192 kHz in both single-wire and dual-wire modes
Frequency Response
Analog in: 20 Hz to 20 kHz, +/- 0.1 dB Analog output: 20 Hz to 20 kHz, +/- 0.1 dB
Dynamic Range
Analog in: 117 dB, A-weighted Analog out: 117 dB, A-weighted
Total Harmonic Distortion/Noise
Analog in: -108 dB (0.0004%) @ -1 DBFS, -104 dB (0.0006%) @ -6 DBFS, (@ 1 kHz 22Hz to 22 kHz BW) Analog out: -107 dB (0.00045%) @ -1 DBFS, -106 dB (0.00050%) @ -6 DBFS (@ 1 kHz, 22 Hz - 22 kHz BW)
Crosstalk
Analog in: -120 dB maximum, 1 kHz signal, -1 dBFS Analog out: -120 dB max, 1 kHz signal, -1 dBFS
Mixer
Type: digital, hardware based, low latency Routing: Ability to route any input to any or multiple outputs Mixing: Up to 4 input or playback signals to any output, 40-bit precision Status: Peak levels to -114 dB on all inputs and outputs
External Wordclock Input
75 Ω BNC word clock input and output
MIDI
2x 5 pin female DIN connectors (1x input, 1x output)
Remote Control
Function: Controls all I/O, levels, monitoring, routing and setting recall Method: AES16/AES16e: With PC or Macintosh IrDA: For compatible Pocket PCs and laptops MIDI: Selected MIDI devices
The user manual for the Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB can be downloaded in .pdf
format if it did not come with your new ad/da converters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Lynx Studio Technology users keep a unique electronic library
for Lynx Studio Technology ad/da converterss,
where you can use our link to download the user manual for the Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB.
The user manual lists all of the functions of the Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB,
all the basic and advanced features and tells you how to use the ad/da converters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Lynx Studio Technology service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB. User manuals are also
available on the Lynx Studio Technology website under Pro Audio - Computer Audio - AD/DA Converters.
Question and answer discussion forum concerning user instructions and resolving problems with the Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the Lynx Studio Technology Aurora 16 LT-USB AD/DA AURORA 16 USB - no comments have been made yet - be the first to add a comment