|
User manual for Manley Labs CORE Tube Reference Channel Strip MCORE
- Manufacturer: Manley Labs
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Channel Strips
- Safety instructions
- Startup and operation of the channel strips
- Tips for setting up your Manley Labs
- Settings and expert assistance
- Contact Manley Labs service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Manley Labs CORE Tube Reference Channel Strip MCORE,
which address similar problems with connecting and setting up Channel Strips Manley Labs.
|
User manual for the Manley Labs CORE Tube Reference Channel Strip MCORE
The user manual for the Manley Labs CORE Tube Reference Channel Strip MCORE provides
necessary instructions for the proper use of the product Pro Audio - Recording - Channel Strips.
The CORE Tube Reference Channel Strip from Manley Labs is a single-channel signal processor with an intuitive front panel layout that allows for quick and easy adjustment over mic preamp, compressor, EQ, and limiter settings. The CORE incorporates many of Manley's technological innovations including the preamp from the VOXBOX, featuring a hand-wound iron transformer with nickel laminations, negative feedback gain circuit, and triode vacuum tube circuit. The direct input offers an all discrete solid-state path with a 10 MΩ impedance.
|
If you own a Manley Labs channel strips and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Manley Labs CORE Tube Reference Channel Strip MCORE in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Manley Labs CORE Tube Reference Channel Strip MCORE:
| Input / Output | 1 x Mic Input: Balanced transformer coupled XLR at 1.2 kΩ
1 x Line Input: Balanced XLR at 10 kΩ
1 x Direct Input: Unbalanced 1/4" at 10 MΩ
1 x Main Output: Balanced XLR at 50 Ω
1 x Direct Output: Balanced XLR at 50 Ω
1 x Insert: 1/4" TRS send at 50 Ω return at 13 kΩ | | EQ Section | Baxandall Low Shelf: 90 Hz ±12 dB
Baxandall High Shelf: 12 kHz ±12 dB
Mid-Range Switchable Bell EQ: 100Hz to 1kHz or 1kHz to 10kHz ±10 dB | | Compressor | Maximum Gain Reduction: 16 dB
Attack Time: 14 to 150 ms for 6dB compression
Release Time: 2.63 to 150 ms for 6dB compression | | Limiter | Attack Time: 115 μs
Release Time: 2.3 to 300 ms | | Tubes | 1 x 12AX7WA for gain
1 x 6922 White Follower output | | Maximum Input | Maximum Mic Input
Low Gain Setting: -5 dBu or 435mV RMS @ 0.5% THD
High Gain Setting: -25 dBu or 44mV RMS @ 0.5% THD
Max Line Input
Low Gain Setting: +13 dBu or 3.5V RMS @ 0.5% THD
High Gain Setting: -8 dBu or 300mV RMS @ 0.5% THD
Direct Input
Low Gain Setting: +24 dBu or 12V RMS @ 0.5% THD
High Gain Setting: +17 dBu or 5.5V RMS @ 0.5% THD
Insert Return: +20 dBu or 7.8V RMS @ 0.5% THD | | Maximum Output | Maximum Preamp Output (Insert Send): +35 dBu or 43V RMS @ 0.5% THD
Maximum Main Output: +20 dBu
Main Output Impedance: 50 Ohms
Direct Output Headroom (Referenced to +4 dBv): 31 dB
Main Output Headroom (Referenced to +4 dBv): 16 dB | | Dynamic Range | >90 dB | | Frequency Response (Audio) | 10 Hz to 20 kHz ±0.5 dB | | THD & Noise | THD & Noise (1kHz @ +4 dBm): 0.02% at Low Gain setting | | Noise Floor | Noise Floor (Gain Set to Minimum): -70 dB wideband typical | | Gain | Microphone Input: 40 or 60 dB
Line Input: 20 or 40dB
EQ and Limiter Section: 10 dB | | Power | Universal Power Supply: 90 to 254 VAC
Power Consumption: 35 W
Mains Voltage Frequency: 50~60 Hz | | Rackmountable | 2U | | Dimensions (W x H x D) | 19.0 x 3.5 x 7.0" / 48 x 9.0 x 18 cm | | Weight | 8 lb / 4 kg | | Package Weight | 11.7 lb | | Box Dimensions (LxWxH) | 23.4 x 11.1 x 8.9" | |
The user manual for the Manley Labs CORE Tube Reference Channel Strip MCORE can be downloaded in .pdf
format if it did not come with your new channel strips, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Manley Labs users keep a unique electronic library
for Manley Labs channel stripss,
where you can use our link to download the user manual for the Manley Labs CORE Tube Reference Channel Strip MCORE.
The user manual lists all of the functions of the Manley Labs CORE Tube Reference Channel Strip MCORE,
all the basic and advanced features and tells you how to use the channel strips.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Manley Labs service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Manley Labs CORE Tube Reference Channel Strip MCORE. User manuals are also
available on the Manley Labs website under Pro Audio - Recording - Channel Strips.
Question and answer discussion forum concerning user instructions and resolving problems with the Manley Labs CORE Tube Reference Channel Strip MCORE - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Manley Labs CORE Tube Reference Channel Strip MCORE
|
|
|
|
|
