|
User manual for Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR
- Manufacturer: Manley Labs
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Dynamics Processors
- Safety instructions
- Startup and operation of the dynamics processors
- Tips for setting up your Manley Labs
- Settings and expert assistance
- Contact Manley Labs service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR,
which address similar problems with connecting and setting up Dynamics Processors Manley Labs.
|
User manual for the Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR
The user manual for the Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR provides
necessary instructions for the proper use of the product Pro Audio - Recording - Dynamics Processors.
The Stereo Variable MU Limiter Compressor Mastering Version with T-Bar Mod from Manley Labs is a dynamic signal processor using two single-pentode tubes wired in triode for peak reduction and compression. The tube circuit is constantly re-biased by the vacuum tube rectified side-chain control voltages, resulting in a smooth change in gain. This mastering version replaces all conductive plastic pots with Greyhill rotary switches. The 1% metal-film resistors on the Greyhill switches not only provide recall-ability, but also deliver an improvement in sound quality.
|
If you own a Manley Labs dynamics processors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR:
| Number of Channels | 2 | | Inputs | 2 x XLR transformer balanced (600 Ω) | | Outputs | 2 x XLR transformer balanced (600 Ω) | | Input Level | Input Level Switch: -4, -2, 0, +2, +4 dB | | Output Level | Output Level Switch (24 Detents): -11 to 0 dB (1/2 dB steps) | | Compression Threshold | Threshold Switch (24 Detents): -11.5 to +1 dB
Compressor (1/4 dB Steps): 6 dB range
Limiter (1/2 dB Steps): 12 dB range | | Ratio | Compressor: 1.5:1
Limiter: 4:1 to 20:1 | | Attack Time | Variable Attack: 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90 ms | | Release Time | Recovery 5 Steps (5 Detents): 0.2, 0.4, 0.6, 4.0, 8.0 sec | | Maximum Output Level | +30 dBu (26 Vrms) 26 dB Headroom | | Make-up Gain | +35 dB | | Frequency Response | 20 Hz to 25 kHz | | THD & Noise | <0.1% THD @ 1 kHz
Noise Floor: -85 dB typical | | Meter | Illuminated Sifam meters | | Tubes per Side | Fully Differential All-Tube Circuitry: 5670, 5751 (or 12AX7), 7044 (or 5687), & 12AL5
(T-Bar mod replaces 5670s with 2 pairs of 6BA6s) | | High Pass Filter | HP SC: High-Pass Side-Chain Filter:
-1 to -3 dB @ 100 Hz
-4 to -6 dB @ 50 Hz | | Rackmountable | 2 U | | Power Supply | 120 VAC, 80 W, 60 Hz | | Fuse | Mains Fuse Value: 1.25 A
Mains Fuse Type: MDA or MDL SLO-BLO Time Delay: 1-1/4" x 1/4" | | Dimensions (WxHxD) | 19.0 x 3.5 x 10.0" / 48.3 x 8.9 x 25.4 cm
Power Transformer protrudes 3.5" / 8.9 cm out back of chassis | | Weight | 14.0 lb / 6.4 kg | |
The user manual for the Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR can be downloaded in .pdf
format if it did not come with your new dynamics processors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Manley Labs users keep a unique electronic library
for Manley Labs dynamics processorss,
where you can use our link to download the user manual for the Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR.
The user manual lists all of the functions of the Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR,
all the basic and advanced features and tells you how to use the dynamics processors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Manley Labs service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR. User manuals are also
available on the Manley Labs website under Pro Audio - Recording - Dynamics Processors.
Question and answer discussion forum concerning user instructions and resolving problems with the Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR
Post new comment to Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR
| Subject: Alignment Varimu with T-Bar | | Date: 26.02.2022 13:03:32 | Author: Werner Scherrer-Tangen | | Hello, I just carefully did the T-Bone mod in the Vatimu for Brian Mørk Hansen here in Denmark. He resently also ordered a spare set tubes. I've balanced the T-Bar and replaced tubes. Now the unit has a significant Threshold offset. Where can I get allignment instructions? Thanks /Werner | | Reply |
Post new comment/question/response regarding the Manley Labs Stereo Variable MU Limiter Compressor MMSSLCTBAR
|
|
|
|
|
