|
User manual for Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI
- Manufacturer: Marshall Electronics
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Wired IP Cameras
- Safety instructions
- Startup and operation of the wired ip cameras
- Tips for setting up your Marshall Electronics
- Settings and expert assistance
- Contact Marshall Electronics service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI,
which address similar problems with connecting and setting up Wired IP Cameras Marshall Electronics.
|
User manual for the Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI
The user manual for the Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired IP Cameras.
The PS-541-HDSDI 2MP 1080p H.264 Network Camera with Built-In Producer Station and HD-SDI Video Output from Marshall Electronics utilizes a 1/2.5", 1920 x 1080 CMOS sensor and a 20x optical zoom lens. It features a motorized ICR (IR-cut filter), WDR (Wide Dynamic Range), and BLC (Back Light Compensation). This network camera allows dual streaming of real-time imagery in H.264 and MJPEG formats at a resolution of 1920 x 1080 at up to 30 fps.
The Producer Station firmware takes the IP feed of the camera and processes it for automatic transport to the StreamVu TV server via any high speed broadband / Internet connection. The streaming process becomes an automatic function where all you have to do is set up a StreamVu TV account, plug the camera into your internet connection and the Producer Station automatically locates the StreamVu TV server upon connection to the Internet and power-up. It performs a series of discovery tests & analyses, establishes the communication link to the server, and readies the initiation of the broadcast. During a broadcast you have complete control of PTZ and camera settings via our built in Web Browser.
Each event is scheduled and setup by you via the Producer Portal prior to start a broadcast. The Producer Station receives its command and control information via the Internet upon connection, a simple click of a mouse via the Producer Portal enables the beginning of the broadcast as well as terminates the broadcast.
|
If you own a Marshall Electronics wired ip cameras and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI:
| Image Sensor | 1/2.5" progressive CMOS image sensor | | Focal Length | 4.7 to 94 mm | | Aperture | f/1.6 to 3.5 | | Focus | infinity to 1 cm | | Zoom | 20x optical
12x digital | | Horizontal Angle of View | 54.1° (Wide) to 3.0° (Tele) | | Minimum Illumination | 1.0 lux (B&W), f/1.8 with 50 IRE | | S/N Ratio | 50 dB or more | | AE Mode | Auto, Manual, Bright, Shutter Priority, Iris Priority, Spot | | Iris Control | Auto / Manual (f/1.8 to f26, close) | | Gain Control | Auto / Manual (-3 to 18 dB) | | Shutter Control | Auto / Manual (1/2 to 1/10,000 sec) | | White Balance | Auto / Manual (red, blue gain adjustable) | | DSS Limit | 1/60 to 1/2 or 1/50 to 1/2 | | Day & Night | Auto / Day / Night (ICR) | | BLC | Auto / Manual | | Wide Dynamic Range | On / Off | | Aperture Control | 16 steps | | Standards | Main Stream: H.264
Secondary Stream: H.264/MJPEG | | Output | 1 x HD-SDI | | Resolution | 1920 x 1080 to 352 x 240, 18 resolution steps | | Maximum Frame Rate | H.264/MJEPG: 30 fps @ all resolutions | | Algorithm | G.711 / AAC | | Sample Rate | G.711: 8 kHz
AAC: 32 kHz | | Bitrate | G.711: 64 kb/s
AAC: 64 kb/s, 128 kb/s | | System Mode | Encoder | | Network Interface | Ethernet 10 / 100Base-T (RJ-45) | | Network Protocol | TCP/IP, UDP, Multicast, DHCP, SMTP, HTTP, SNMP, RTP, RTSP | | Video Standards | Main Stream: H.264 | | Bitrate | 32 to 10,240 kb/s | | Resolution | 1920 x 1080/60i to 352 x 240 / 30fps, 18 resolution steps | | Frame Rate Range | 1 to 30 fps | | Audio Standards | AAC | | Sample Rate | AAC: 32 kHz | | Data Rate | AAC: 64 kb/s, 128 kb/s | | Audio | Input: 1 x Line-In (RCA Mono)
Output: 1 x Line-Out (RCA Mono) | | Serial Port | 1 x RS-485 | | Data Rate | 2,400 b/s to 115,200 b/s | | Sensor Input | 1 x Photo-Coupler input | | Alarm Output | 1 x Relay Output (normal open) | | Reset Button | Factory reset button | | System Status | LED | | Software | True NVR/CMS: Live Monitoring, Recording, Search & Playback, Backup | | Power | Supply: 12 V / 0.7 A
PoE+(Power over Ethernet): 802.3af
Consumption: 8.5 W | | Operation Temperature | 14 to 122°F (-10 to 50°C) | | Dimensions (L x W x H) | 6.6 x 2.9 x 2.9" (16.7 x 7.3 x 7.3 cm) | | Weight | 1.5 lb (0.6 kg) | |
The user manual for the Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI can be downloaded in .pdf
format if it did not come with your new wired ip cameras, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Marshall Electronics users keep a unique electronic library
for Marshall Electronics wired ip camerass,
where you can use our link to download the user manual for the Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI.
The user manual lists all of the functions of the Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI,
all the basic and advanced features and tells you how to use the wired ip cameras.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Marshall Electronics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI. User manuals are also
available on the Marshall Electronics website under Surveillance - Surveillance Video - Wired IP Cameras.
Question and answer discussion forum concerning user instructions and resolving problems with the Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Marshall Electronics PS-541-HDSDI 2MP 1080p H.264 PS-541-HDSDI
|
|
|
|
|
