|
User manual for Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI
- Manufacturer: Marshall Electronics
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Wired IP Cameras
- Safety instructions
- Startup and operation of the wired ip cameras
- Tips for setting up your Marshall Electronics
- Settings and expert assistance
- Contact Marshall Electronics service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI,
which address similar problems with connecting and setting up Wired IP Cameras Marshall Electronics.
|
User manual for the Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI
The user manual for the Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired IP Cameras.
The VS-571A-HDSDI 2MP True Day/Night Vandal Proof IP Speed Dome Camera with HD-SDI Video Output from Marshall Electronics utilizes a 1/2.8", 1920 x 1080 CMOS sensor and a 20x optical zoom lens. It features a mechanical ICR (IR-cut filter), WDR (Wide Dynamic Range), and BLC (Back Light Compensation). This dome camera allows dual streaming of real-time imagery in H.264 and MJPEG formats at a resolution of 1920 x 1080 at up to 30 fps.
|
If you own a Marshall Electronics wired ip cameras and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI:
| Image Sensor | 1/2.8" progressive CMOS image sensor | | Focal Length | 4.45 to 89 mm | | Aperture | f/1.6 to 2.9 | | Zoom | 20x optical
12x digital | | Horizontal Angle of View | 55.4° (Wide) to 2.9° (Tele) | | Minimum Illumination | Normal: 1.7 lux (color), 0.3 lux (B&W, ICR On) with 50 IRE
High Sensitivity: 0.5 lux (color), 0.095 lux (B&W ICR On) with 50 IRE | | Electronic Shutter | 1/1 to 1/10,000 sec | | Privacy Masking | 8 regions | | Mode | Flip: Horizontal, vertical | | Image Enhancement | AE, AWB, AGC, TDN, WDR, BLC, DNR, DSS | | Compression | H.264, MJPEG | | Maximum Frame Rate | 30 fps @ 1920 x 1080 | | Bitrate | Primary: 32 kb/s to 10 Mb/s
Secondary: 32 kb/s to 1 Mb/s | | Resolution | 352 x 240 to 1920 x 1080 | | Streaming | Primary: H.264
Secondary Stream: H.264/MJPEG | | Output | HD-SDI | | Audio Compression | G.711 , AAC-LC | | Audio Sampling Rate | G.711: 8 KHz, AAC: 32 KHz | | Output | 1 x Line-Out (Mini-stereo, stereo signal) | | Audio Input/Output | 1 x Line In (mono, RCA type), 1 x Line Out (mono, RCA type) | | Bitrate | G.711: 64 kb/s
AAC: 64 kb/s, 128 kb/s | | Streaming | Full duplex | | Panning Range | 360° | | Tilting Range | 90° | | PTZ Functionalities | Preset (128), Pattern (4), Swing (8), Group (8), Auto parking, Zoom proportional jog, Freeze on position move, Power-up action, Event holding | | Speed | Continuous (Jog) move speed: 0.1 to 360°/sec
Position move speed: 2 to 500°/sec | | Network Interface | Ethernet 10/100base-T (RJ-45) | | Network Protocol | IPv4/v6, TCP, UDP, IGMP(Multicast), ICMP, DHCP, HTTP, HTTPS, RTP, RTSP, FTP, SNMP, SMTP, UPnP, WS-Discovery, Zero Configuration, NTP, DDNS | | Security | Password protection, IP address filtering, HTTPS encryption | | Application Programming Interface | MEI Protocol/SDK, ONVIF, PSIA, MPEG-TS | | Event | Sources: Motion, sensor input, slient disconnection
Actions: Notification (E-mail), FTP, PTZ preset, alarm control, recording | | Software | True NVR/CMS: Live Monitoring, Recording, Search & Playback, Backup | | Environment | Waterproof IP67, vandal proof | | Power | Supply: Minimum 12 VDC /3.0 A, 24 VAC / 2.5 A
PoE+(Power over Ethernet): 802.3at
Consumption: 12 VDC
PoE+: Maximum 21.6 W, 24 VAC, 48 W | | Operation Temperature | 14 to 122°F (-10 to 50°C) | | Dimensions | Dome: 5.9" (149.8 mm) | | Weight | Wall: Approximately 8.4 lb (3.8 kg)
Ceiling: Approximately 7.0 lb (3.1 kg) | |
The user manual for the Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI can be downloaded in .pdf
format if it did not come with your new wired ip cameras, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Marshall Electronics users keep a unique electronic library
for Marshall Electronics wired ip camerass,
where you can use our link to download the user manual for the Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI.
The user manual lists all of the functions of the Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI,
all the basic and advanced features and tells you how to use the wired ip cameras.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Marshall Electronics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI. User manuals are also
available on the Marshall Electronics website under Surveillance - Surveillance Video - Wired IP Cameras.
Question and answer discussion forum concerning user instructions and resolving problems with the Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Marshall Electronics VS-571A-HDSDI 2MP True VS-571A-HDSDI
|
|
|
|
|
