User manual Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027
Operating instructions and pdf manual for use - Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027 User manual, User manual Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027, Moog, Minimoog, Voyager, XL, Monophonic, Synthesizer,
User manual for Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027
Manufacturer: Moog
Basic description and contents of package
Product classification: Pro Audio - Musical Instruments - Synthesizer Keyboards
Safety instructions
Startup and operation of the synthesizer keyboards
Tips for setting up your Moog
Settings and expert assistance
Contact Moog service
Troubleshooting
Warranty information
Click to enlarge image
We recommend checking out our discussion threads on the Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027,
which address similar problems with connecting and setting up Synthesizer Keyboards Moog.
User manual for the Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027
The user manual for the Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027 provides
necessary instructions for the proper use of the product Pro Audio - Musical Instruments - Synthesizer Keyboards.
The tolex Moog Minimoog Voyager XL Monophonic Synthesizer is a 61-key programmable monophonic analog synthesizer based on the Minimoog Model D and Voyager synths. Its controls include a velocity sensitive keyboard with after-pressure, a ribbon controller with pitch and gate CV outputs, and a touch surface controlled with X,Y,A, and gate outs. The synth has 1,024 presets, 896 of which are user writable.
The Voyager XL's sound engine is powered by 3 analog oscillators with continuously variable waveforms that can be manipulated by a variety of on-board parameters including 2 active attenuators, a 4 input CV mixer, dual LFOs, 2 modulation busses, and more. The synth also features external audio inputs, allowing you to use the Voyager XL to manipulate your tracks. Its expansive CV, gate, and modulation options can be routed via the front-panel patchbay with the 10 included patch cables.
If you own a Moog synthesizer keyboards and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027:
Specifications
Type
Programmable monophonic analog synthesizer
Sound Generation
3x Oscillators with continuously variable waveform control, 1x Noise Source, 5-input Mixer 2x Filters 2x Envelope Generators 1x LFO 2x Programmable Modulation Sections, Glide and Fine Tune controls
Program Memory
1024 Presets in 8 Banks 896 locations are user rewritable
Keyboard
61-note velocity sensitive keyboard with after-pressure (C to C) Transmits polyphonic MIDI Note On/Off messages along with velocity and aftertouch
Controls
Pitch Wheel: programmable, up to ± 31 semitones (2 octaves and a 5th) Modulation Wheel: 0 to 100% Glide and Release Switches: On/Off Ribbon Controller: Single axis controller that generates CV and Gate control signals based on the position of the player's finger. Touch Surface: Programmable, three dimensional surface that generates continuously variable control signals based on the position of the player's finger and the amount of contact area the finger makes with the surface. Master Volume Control: 0 to 100%
User Interface
Mode Controls: Preset, Edit and Master function buttons Selection/Navigation Controls: Cursor, Enter, and -1/+1 buttons
Patch Panel
Pedal/Control Jacks (14 inputs for external control of various CV and Gate functions, 23 CV and Gate outputs) 2x Bi-Directional Attenuators with Offset Four-Input Mixer section with Offset and Master Attenuator LAG Processor (1 ms to 1 s) A Six-waveform, 2 Output LFO processor with MIDI SYNC and External Clock capabilities
Back Panel I/O Ports
AC Power Inlet (universal power supply, 100 to 250 V AC, 50-60 Hz) Power ON/OFF switch Stereo Audio Output jacks (unbalanced outputs) External Audio In jack Mixer Out/Filter In jack 2x TNC Lamp Sockets: supplies 12 V 0.5A (5 W bulb maximum) per connector MIDI In, Out and Thru connections
Audio Output
2x 1/4" (6.3 mm) unbalanced outs (L,R) 1x 1/4" (6.3 mm) TRS with dedicated volume control
Control Voltage Out
Keyboard Pitch (with internal trim to calibrate to 1 V/Octave) Keyboard Velocity Keyboard After Pressure Touch Surface X Touch Surface Y Touch Surface A (area) Pitch Bend Wheel Mod Wheel MOD 1 Signal (signal at MOD 1 input) MOD 2 Signal (signal at MOD 2 input) LFO Triangle Wave LFO Square Wave Mod Wheel Mod Buss Output Pedal/On Mod Buss Output Filter Envelope Volume Envelope Sample and Hold Step Sample and Hold Smooth Noise Ribbon Controller CV Output (-5 V to 5 V)
Envelope Rate CV (-5 V to 5 V) Ring-Powered OSC Pitch CV (adj. to 1 V/Octave) (-5 V to 5 V) Ring-Powered OSC Wave CV (all three oscillators affected) (0 V to 5 V) Ring-Powered FILTER Cut-Off CV (-5 V to 5 V) Ring-Powered VCA Volume CV (0 V to 5 V) Ring-Powered VCA Pan CV (-2.5 V to 2.5 V) Ring-Powered LFO Rate CV (-5 V to 5 V) Ring-Powered MOD Mod1 CV (0 V to 5 V) Ring-Powered MOD Mod2 CV (0 V to 5 V) Ring-Powered S&H CV (-5 V to 5 V) Ring-Powered
Gate Inputs
NV Release ON/OFF (0 V OFF, 5 V ON) ENV Gate Input (0 V OFF, 5 V ON) LFO Sync ON/OFF (0 V OFF, 5 V ON) S&H Gate Input (0 V OFF, 5 V ON) No footswitch input
Active Attenuators
2x Active Attenuators Channel 1 is normalled to LFO 2 output. So, if nothing is connected to the Channel 1 input jack, the output of Channel 1 will be the attenuated version of the LFO 2 output Channel 2 is normalled to Ribbon output. So, if nothing is connected to the Channel 2 input jack, the output of Channel 2 will be the attenuated version of the Ribbon controller Expression Pedals can be connected to the Attenuator inputs (i.e. they are ring-powered inputs) Amount controls gain of -1 (CCW) to 1 (CW). Thus, the attenuators can create an inverted version of the waveform Offset control allows you to add a DC voltage of -5 V to 5 V to the input signal. The Attenuator output will be clipped to approximately +/-10 V
Mixer
4 Input Mixer Inputs 1 and 2 can be attenuated via front-panel knobs Inputs 1 and 3 can be controlled by Expression Pedals (i.e. ring-powered) Two output CVs (+) and (-) DC offset can be added to signal via OFFSET knob Overall output of Mixer can be adjusted via the Master knob
Lag Processor
Rise and Fall time constants are adjustable from 1 ms to 1 s (middle is 100 ms)
LFO2
A MIDI-syncable second LFO source has been added to the Voyager XL. The default frequency range is 0.02 Hz (50 s) to 20 Hz (0.05 s). This range was made to augment the current Voyager LFO which does not go slow-enough for some very slow modulations
Inputs: LFO 2 can be Free-running (adjusted by the Rate knob on the front panel) MIDI Sync from external MIDI clock Directly Clocked from a Gate CV via the front panel Clock jack Controlled via external CV or Expression Pedal via the front panel Rate CV jack
OUTPUTS: LFO 2 has two complementary LFO outputs labeled (+) and (-). In default mode, these are the same waveform 180 degrees out of phase.
The user manual for the Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027 can be downloaded in .pdf
format if it did not come with your new synthesizer keyboards, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Moog users keep a unique electronic library
for Moog synthesizer keyboardss,
where you can use our link to download the user manual for the Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027.
The user manual lists all of the functions of the Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027,
all the basic and advanced features and tells you how to use the synthesizer keyboards.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Moog service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027. User manuals are also
available on the Moog website under Pro Audio - Musical Instruments - Synthesizer Keyboards.
Question and answer discussion forum concerning user instructions and resolving problems with the Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027 - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the Moog Minimoog Voyager XL Monophonic Synthesizer VY-MIN-0027 - no comments have been made yet - be the first to add a comment