|
User manual for Moog Minitaur Analog Bass Synthesizer (Black) TBP-002
- Manufacturer: Moog
- Basic description and contents of package
- Product classification: Pro Audio - Musical Instruments - Synthesizer Modules
- Safety instructions
- Startup and operation of the synthesizer modules
- Tips for setting up your Moog
- Settings and expert assistance
- Contact Moog service
- Troubleshooting
- Warranty information
- Price: 499 USD
|
We recommend checking out our discussion threads on the Moog Minitaur Analog Bass Synthesizer (Black) TBP-002,
which address similar problems with connecting and setting up Synthesizer Modules Moog.
|
User manual for the Moog Minitaur Analog Bass Synthesizer (Black) TBP-002
The user manual for the Moog Minitaur Analog Bass Synthesizer (Black) TBP-002 provides
necessary instructions for the proper use of the product Pro Audio - Musical Instruments - Synthesizer Modules.
The black Minitaur Analog Bass Synthesizer from Moog is a programmable analog bass synthesizer designed with a one-knob-per-function design, allowing you to adjust your sounds on the fly. Its internal memory is capable of storing up to 100 presets for recalling your favorite parameters. The Minitaur's sound engine is powered by 2 oscillators with selectable sawtooth or square waveshapes.
The synth supports via 5-pin DIN and USB MIDI, which offers control over both playing and the Minitaur's LFO, allowing it to be used to create dubstep-style wobbles and sweeps. Its rear-panel control voltage inputs provide access for additional tweaking of your pitch, filter, and volume with external CV sources, while the 1/4" mono audio input allows you to use the Minitaur's filter and envelopes on other audio sources.
|
If you own a Moog synthesizer modules and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Moog Minitaur Analog Bass Synthesizer (Black) TBP-002 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Moog Minitaur Analog Bass Synthesizer (Black) TBP-002:
Type | Programmable Monophonic Analog Bass Synthesizer | Oscillators | Oscillator 1: Wave: Sawtooth/Square Level: 0 to 100%
Oscillator 2: Frequency: +/- 12 semitones Wave: Sawtooth/Square Level: 0 to 100%
Glide Rate: 0 to 100% | Filters | Cutoff: 20 Hz to 20 kHz Resonance: 0 to Self-Oscillation Filter Envelope Amount: -100% to 100% | Envelope Generators | 2x Envelope Generators Attack Time: 1 ms to 30 s Decay Time: 1 ms to 30 s Sustain Level: 0 to 100% Release Time: 1 ms to 30 s Release: On/Off | Modulation | LFO Rate with Rate LED: 0.0 1 to 100 H z Wave: Triangle Amount to VCO: 0 to 100% Amount to VCF: 0 to 100% | Controls | VCO 2 Frequency - Sets the frequency offset of VCO 2 from VCO 1 from -1 Octave to +1 Octave. Center is unison with VCO 1 Oscillator 1 & 2 Saw/Square Waveform Selector: Selects a Sawtooth wave (LED Off) or Square wave (LED On) Signal for VCO 1 and 2 VCO 1 Level: Sets the level of VCO 1 VCO 2 Level: Sets the level of VCO 2 VCF Cutoff: Sets the Cutoff Frequency of the 4-pole Moog Low-pass VCF from 20 Hz to 20 kHz VCF Resonance: Sets the gain for the amount of signal from the output of the VCF fed back to the input of the VCF. This creates a peak in frequency response at the Cutoff Frequency that can be increased all the way to self-oscillation VCF EG Amount: Bi-polar control sets the (+) or (-) amount of Envelope Generator modulation of the VCF. Center is no Envelope Generator modulation LFO Rate: Sets the frequency of the LFO. Range is from 0.01 Hz to 100 Hz LFO VCO Amount: Sets the amount that the LFO modulates the VCO LFO VCF Amount: Sets the amount that the LFO modulates VCF VCA EG Attack: Sets the attack Time of a Minimoog-style ADSR Envelope Generator used to modulate the VCA. Time ranges from 1 ms to 30 s VCA EG Decay/Release: Sets both the decay time to the sustain level and release time of a Minimoog-style ADSR Envelope Generator used to modulate the VCA. Time ranges from 1 ms to 30 s. The Release segment of the EG is enabled by the Release On/Off switch VCA EG Sustain: Sets the sustain level of a Minimoog-Style ADSR Envelope Generator used to modulate the VCA VCF EG Attack: Sets the attack time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF. Time ranges from 1 ms to 30 s VCF EG Decay/Release: Sets both the decay time to the sustain level and release time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF. Time ranges from 1 ms to 30 s. The Release segment of the EG is enabled by the Release On/Off switch VCF EG Sustain: Sets the sustain level of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF Release On/Off Switch: Enables (LED On or Disables (LED Off) the Release segments of both Envelope Generators Glide On/Off Switch: Enables/ Disables the Glide function Glide: Sets the rate of Glide when the note controlling the Minitaur changes Volume: The Master Volume of the MINITAUR's synth engine Fine Tune: Adjusts the frequency of the VCOs +/- 1 semitone MIDI Indicator LED: Indicates incoming MIDI activity LFO Rate Indicator LED: Indicates the rate of the LFO | I/O | 12 VDC power inlet, accepts 12 VDC, tip positive Monophonic Audio In: 1/4" (6.3 mm) TS unbalanced, accepts 4 dBu line level signal Monophonic Audio Out: 1/4" (6.3 mm) TS unbalanced Headphone Jack: 1/8" (3.5 mm)TRS stereo mini jack Control Voltage Inputs: Pitch CV: 1/4" (6.3 mm) TRS, 0 to 5 V Filter CV: 1/4" (6.3 mm) TRS, 0 to 5 V Volume CV: 1/4" (6.3 mm) TRS, 0 to 5 V Gate: 1/4" (6.3 mm), 5 V trigger MIDI Input: 5-pin DIN, USB MIDI Output: USB | Operating System | Flash upgradeable via MIDI Sysex | Power Consumption | 7 W | Dimensions (WxDxH) | 8.75 x 5.12 x 3.12" (222.3 x 130.2 x 79.4 mm) | Weight | 2.5 lb (1.2 kg) | Package Weight | 3.75 lb | Box Dimensions (LxWxH) | 9.4 x 7.9 x 7.1" | |
The user manual for the Moog Minitaur Analog Bass Synthesizer (Black) TBP-002 can be downloaded in .pdf
format if it did not come with your new synthesizer modules, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Moog users keep a unique electronic library
for Moog synthesizer moduless,
where you can use our link to download the user manual for the Moog Minitaur Analog Bass Synthesizer (Black) TBP-002.
The user manual lists all of the functions of the Moog Minitaur Analog Bass Synthesizer (Black) TBP-002,
all the basic and advanced features and tells you how to use the synthesizer modules.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Moog service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Moog Minitaur Analog Bass Synthesizer (Black) TBP-002. User manuals are also
available on the Moog website under Pro Audio - Musical Instruments - Synthesizer Modules.
Question and answer discussion forum concerning user instructions and resolving problems with the Moog Minitaur Analog Bass Synthesizer (Black) TBP-002 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Moog Minitaur Analog Bass Synthesizer (Black) TBP-002
|
|
|
|
|