|
User manual for Neumann M 52 Active Control Monitor M 52
- Manufacturer: Neumann
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Studio Monitors
- Safety instructions
- Startup and operation of the studio monitors
- Tips for setting up your Neumann
- Settings and expert assistance
- Contact Neumann service
- Troubleshooting
- Warranty information
- Price: 600 USD
|
We recommend checking out our discussion threads on the Neumann M 52 Active Control Monitor M 52,
which address similar problems with connecting and setting up Studio Monitors Neumann.
|
User manual for the Neumann M 52 Active Control Monitor M 52
The user manual for the Neumann M 52 Active Control Monitor M 52 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Studio Monitors.
The Neumann M 52 Active Control Monitor is the reference monitor used in many small studios and broadcast vans. It is compact, taking up a volume of 1.8 liters, and offers a flat frequency response, making it suitable as either a control monitor in live broadcast or as a mix monitor in a smaller recording studio. This monitor can be powered by a 12 to 20V external supply, such as a car battery in small broadcast vans or video editing stations. As a multimedia monitor, the M 52 is suitable for both permanent and mobile applications. The speaker chassis is magnetically shielded so that placement next to video monitors or magnetic media will pose no problem. The enclosure, which is constructed entirely of aluminum, offers maximum interior volume for its size, and inner wall bracing adds a stiffness that eliminates resonant colorations. These factors help the 3" (75mm) high-performance neodymium broadband driver deliver good sound with very low distortion and a frequency response that is flat across the entire pass band. The volume knob is located on the front of the monitor for quick and easy adjustment. If needed, the knob can be removed to prevent unauthorized operation. The XLR floating transformer-balanced input (+6 dBu) offers a Common Mode Rejection ratio of over 50 dB. The M 52 Control Monitor is so lightweight that it can be mounted on a microphone stand using the cabinet base 3/8" threaded socket. The monitor can be connected to the LH 11 table stand using the adjustable side-mounted screws that allow it to be tilted at any angle for optimal monitoring. The power switch, mains connector, fuse holder, and the 4-pole XLR input for battery operation (12 to 20 volts) are all located on the rear panel.
|
If you own a Neumann studio monitors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Neumann M 52 Active Control Monitor M 52 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Neumann M 52 Active Control Monitor M 52:
Acoustic | Pass Band Free Field Frequency Response: 90 Hz to 20 kHz, ± 5 dB Self-Generated Noise Level at 10 cm: ≤ 20 dB (A) Maximum SPL in Half Space at 3% THD at 1m: 103 dB SPL Maximum SPL Averaged Between: 100 Hz and 6 kHz | Electronics | Woofer Amplifier, Cont. Output Power (THD <0.1%): 24 W Woofer Amplifier, Peak Output Power: 40 W Controller Design: Analog, active Protection Circuitry: Amplifier thermal Infrasonic Filter Frequency; Slope: 80 Hz; 12 dB/oct. Input, analog Impedance, Transformer Balanced Floating: XLR, 10 kΩ Input Sensitivity: +6 dBu Maximum Input Level: +17 dBu (5.5 Vrms) Gain Control: 0 to infinite dB CMRR: >50 dB @ 15 kHz Displays, Indicators - Power On: LED: power on green, stand by red Main Power: 80 to 240 VAC External Power: 12 to 20 VDC Power Consumption - Idle: 5 W; 90 mA Power Consumption - Full Output AC; DC: 50 W; 1.7 A | Mechanical | Cabinet Surface: Painted Color Standard: Anthracite (RAL 7021) Baffle Cover: Fixed metal grille Drivers: Magnetically shielded Woofer: 3" (75 mm) Mounting Points: 3/8" thread on base, 2x M6 on sides Net Volume Internal: 1.8 liters | Dimensions (H x W x D) | 6.8 x 4.7 x 4.6" (173.0 x 120.0 x 116.0 mm) | Weight | 4.6 lb (2.1 kg) | Package Weight | 6.15 lb | Box Dimensions (LxWxH) | 9.3 x 8.6 x 8.0" | |
The user manual for the Neumann M 52 Active Control Monitor M 52 can be downloaded in .pdf
format if it did not come with your new studio monitors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Neumann users keep a unique electronic library
for Neumann studio monitorss,
where you can use our link to download the user manual for the Neumann M 52 Active Control Monitor M 52.
The user manual lists all of the functions of the Neumann M 52 Active Control Monitor M 52,
all the basic and advanced features and tells you how to use the studio monitors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Neumann service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Neumann M 52 Active Control Monitor M 52. User manuals are also
available on the Neumann website under Pro Audio - Recording - Studio Monitors.
Question and answer discussion forum concerning user instructions and resolving problems with the Neumann M 52 Active Control Monitor M 52 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Neumann M 52 Active Control Monitor M 52
|
|
|
|
|