User manual NVT Dual 60W EoC Transmission System NV-EC1701-K2H
Operating instructions and pdf manual for use - NVT Dual 60W EoC Transmission System NV-EC1701-K2H User manual, User manual NVT Dual 60W EoC Transmission System NV-EC1701-K2H, NVT, Dual, 60W, EoC, Transmission, System, NV-EC1701-K2H,
User manual for NVT Dual 60W EoC Transmission System NV-EC1701-K2H
Manufacturer: NVT
Basic description and contents of package
Product classification: Surveillance - Surveillance Video - Video Transmission - Signal Extenders
Safety instructions
Startup and operation of the signal extenders
Tips for setting up your NVT
Settings and expert assistance
Contact NVT service
Troubleshooting
Warranty information
Price: 763 USD
We recommend checking out our discussion threads on the NVT Dual 60W EoC Transmission System NV-EC1701-K2H,
which address similar problems with connecting and setting up Signal Extenders NVT.
User manual for the NVT Dual 60W EoC Transmission System NV-EC1701-K2H
The user manual for the NVT Dual 60W EoC Transmission System NV-EC1701-K2H provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
The NVT Dual 60W EoC Transmission System consists of three NV-EC1701 Transceivers, an NV-PS56-60W Power Supply with a 6’ IEC line cord, one NV-BNCT BNC “T” Adapter, and three NV-PC4PR 3’ 4-pair RJ45 Patch Cords.
Each NV-EC1701 Ethernet over Coax EoC Transceiver is a compact media converter that allows 10/100 BaseT Ethernet and PoE+ power to be transmitted using a coax cable (not included). This transceiver is used in legacy installations where the existing cable is re-deployed as a part of an upgrade to IP cameras. The Class 2 power of 56VDC is delivered to one transceiver, which distributes to multiple remote transceivers and their PoE, PoE+, or high power PoE cameras. The transceiver is simple to use with no IP or MAC addressing required. Status LEDs indicate power and link connectivity/activity for RJ45 and BNC ports.
The NV-PS56-60W Power Supply delivers power to the NV-EC1701 Transceivers. This 56VDC power supply offers an output power of 60W with a 6' IEC line cord.
Each gray 3' 4-Pair RJ45 Patch Cord features two RJ45 plugs and is used with the NV-EC1701 Transceivers.
The BNC "T" Adapter is used for bridging cables and equipment in your setup. It features a male BNC connector on one end and 2 female BNC connectors on the other ends.
If you own a NVT signal extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the NVT Dual 60W EoC Transmission System NV-EC1701-K2H in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the NVT Dual 60W EoC Transmission System NV-EC1701-K2H:
Specifications
3 x
NV-EC1701 Ethernet over Coax EoC Transceiver with PoE Power
Connectivity
RJ45 Ethernet Interface: RJ45, auto-crossover Coax Building Wiring Interface: BNC, RG-59/U or similar 1 control room EoC transceiver plus up to 4 remote EoC transceivers are supported
Wire Type
4-pair Cat5 or better
Distance
RJ45 Ethernet Interface: up to 328' (100 m) Coax Building Wiring Interface: up to 2,500' (750 m)
Distance will often be shorter due to power delivery voltage-drop on the wire Power supplies may be used simultaneously at more than one EoC transceiver
Speed
10/100 Base T, half / full duplex, auto- negotiation, auto MDI / MDIX cross-over
Latency
3 ms
Throughput
80 Mbps ±10% useable bandwidth per network
Power Output
This power sourcing equipment (PSE) supports powered devices (PDs) that are compatible with IEEE 802.3af, or PDs that draw up to 45 W Always on: 48 VDC outputs appear on pins 4 & 5 and 7 & 8, and are current-protected and transient-protected
Impedance
50 to 100 Ω
Transmission Technology
OFDM, 128-bit AES encryption
Power
Blue "Power On"
Interface
BNC / RJ45: Green "Link"
Consumption
2 W @ 48 VDC per transceiver
Power Supply
Power Supply: External inline, with an IEC380-C14 power inlet and 6' (1.8 m) line-cord Input Voltage: 100 to 240 VAC, 50/60 Hz A molded P1J 5.5 mm barrel connector provides a Class 2 (SELV) 48 VDC regulated output Use only the power cord provided with the unit or equivalent UL approved type SPT-2, SVT, or SJT, 18/3 AWG 100 to 240 VAC, 1 A, 140°F (60°C), maximum 15' (4.5 m) long One end with IEC380-C13 appliance coupler and the other end with NEMA 1015P or equivalent for country
Operating Temperature
14 to 122°F (-10 to 50°C)
Storage Temperature
-22 to 158°F (-30 to 70°C)
Humidity
20 to 85% non-condensing
Regulatory
UL Listed to IEC/UL 60950-1 complies with FCC part 15B limits
The user manual for the NVT Dual 60W EoC Transmission System NV-EC1701-K2H can be downloaded in .pdf
format if it did not come with your new signal extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other NVT users keep a unique electronic library
for NVT signal extenderss,
where you can use our link to download the user manual for the NVT Dual 60W EoC Transmission System NV-EC1701-K2H.
The user manual lists all of the functions of the NVT Dual 60W EoC Transmission System NV-EC1701-K2H,
all the basic and advanced features and tells you how to use the signal extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from NVT service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the NVT Dual 60W EoC Transmission System NV-EC1701-K2H. User manuals are also
available on the NVT website under Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the NVT Dual 60W EoC Transmission System NV-EC1701-K2H - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the NVT Dual 60W EoC Transmission System NV-EC1701-K2H - no comments have been made yet - be the first to add a comment