User manual NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD
Operating instructions and pdf manual for use - NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD User manual, User manual NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD, NVT, NV-32PS42-PVD, Power, Supply, StubEQ, Active, NV-32
User manual for NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD
Manufacturer: NVT
Basic description and contents of package
Product classification: Surveillance - Surveillance Video - Video Transmission - Signal Extenders
Safety instructions
Startup and operation of the signal extenders
Tips for setting up your NVT
Settings and expert assistance
Contact NVT service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD,
which address similar problems with connecting and setting up Signal Extenders NVT.
User manual for the NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD
The user manual for the NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
The NVT NV-32PS42-PVD Power Supply StubEQ Active Receiver Hub (32-Channel) provides Class 2 SELV 28 VAC power to 32 cameras while receiving video transmission and delivering P/T/Z telemetry all over a single Cat5 cable per camera. It consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring.
If you own a NVT signal extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD:
Specifications
Transmission Range
Up to 1500' (457m)
Video
Frequency response: DC to 10 MHz
Attenuation: 0.5 dB typ
Common-mode / Differential-mode rejection: 15 KHz to 10 MHz 60 dB typ
Each camera is powered by a fully isolated (floating) 28 VAC Class 2 SELV output at up to 0.5 Amps. Each output is individually thermistor protected for auto-reset.
Power
Power inlet: IEC with molded power cord (included) Voltage: 115 / 230V Current: 3.0 / 1.5 Amps Protection: 5x20mm type T fuse 5Amp 250V Wattage: 345 Watts Heat: - (NV-32PS42-PVD only) 175 BTU / Hour - (NV-32PS42-PVD with cameras) 1,250 BTU / Hour
Environmental
Ambient Temperature: -4 ~ +122°F (-20 ~ +50°C) Humidity (non-condensing): 0 to 95% Transient Immunity: per ANSI / 587 C62.41
Dimensions (WxHxD)
(including connectors) 19 x 1.7 x 12" (43 x 4.5 x 20cm)
The user manual for the NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD can be downloaded in .pdf
format if it did not come with your new signal extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other NVT users keep a unique electronic library
for NVT signal extenderss,
where you can use our link to download the user manual for the NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD.
The user manual lists all of the functions of the NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD,
all the basic and advanced features and tells you how to use the signal extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from NVT service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD. User manuals are also
available on the NVT website under Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the NVT NV-32PS42-PVD Power Supply StubEQ Active NV-32PS42-PVD - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17