User manual NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U
Operating instructions and pdf manual for use - NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U User manual, User manual NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U, NVT, NV-EC1701U, Ethernet, over, 2-wire, Transceiver, NV
User manual for NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U
We recommend checking out our discussion threads on the NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U,
which address similar problems with connecting and setting up Ethernet Extenders NVT.
User manual for the NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U
The user manual for the NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired Networking - Ethernet Extenders.
The NVTNV-EC1701U Ethernet over 2-wire Transceiver with PoE Power is a compact media converter that allows 10/100 BaseT Ethernet and PoE or PoE+ power to be transmitted using a 18/2 cable or similar. This device is typically used in legacy installations where an existing 18/2 cable is re-used as part of an upgrade to IP devices. Up to 48 or 56VDC class 2 power is delivered to a transceiver, which distributes it to multiple remote transceivers and their PoE or PoE+ devices.
If you own a NVT ethernet extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U:
10/100 Base T, half/full duplex, auto-negotiation auto MDI/MDIX cross-over
Latency
3 ms
Data
85 Mb/s ±10% useable bandwidth per network. Example: 4 Mp cameras, all sharing a 2-wire network, each sending 20 Mb/s video stream(s)
Power Output
This PSE (Power Sourcing Equipment) supports PDs (Powered Devices) that are compatible with IEEE 802.3af/at, or PDs that draw up to 60 W. For maximum power/distance, 48 or 56 VDC appears on all eight RJ45 pins, and are current-protected and transient-protected.
Distance will often be shorter due to power supply capacity and wire voltage-drop. For fault/safety protection, never use more than 2 power supplies within a network system.
3 W at 10 to 56 VDC (Per transceiver) Total system consumption: = total consumption of transceivers + total consumption of PDs (IP cameras) + total power dissipated in the wire
Power supplies are external inline, with an IEC380-C14 power inlet and 6.0' (1.8 m) line-cord. Input voltage is 100 to 240 VAC 50 to 60 Hz. A molded P1J 5.5 mm barrel connector provides Class 2 (SELV) regulated output with one of these 3 ratings: Use only the power cord provided with the unit or equivalent UL-approved type SPT-2, SVT, or SJT, 18/3 AWG 100 to 240 VAC, 1 A 140°k (60°C) maximum 15.0' (4.5 m) long. One end with IEC380-C13 appliance coupler and the other end with NEMA 1015P or equivalent for your country.
Operating temperature
-22 to 122°F (-30 to +50°C) 20 to 85% RH non-condensing
The user manual for the NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U can be downloaded in .pdf
format if it did not come with your new ethernet extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other NVT users keep a unique electronic library
for NVT ethernet extenderss,
where you can use our link to download the user manual for the NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U.
The user manual lists all of the functions of the NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U,
all the basic and advanced features and tells you how to use the ethernet extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from NVT service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U. User manuals are also
available on the NVT website under Surveillance - Surveillance Video - Wired Networking - Ethernet Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the NVT NV-EC1701U Ethernet over 2-wire Transceiver NV-EC1701U - no comments have been made yet - be the first to add a comment