|
User manual for Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139
- Manufacturer: Oben
- Basic description and contents of package
- Product classification: Photography - Tripods & Support - Tripods with Heads
- Safety instructions
- Startup and operation of the tripods with heads
- Tips for setting up your Oben
- Settings and expert assistance
- Contact Oben service
- Troubleshooting
- Warranty information
- Price: 627 USD
|
We recommend checking out our discussion threads on the Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139,
which address similar problems with connecting and setting up Tripods with Heads Oben.
|
User manual for the Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139
The user manual for the Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139 provides
necessary instructions for the proper use of the product Photography - Tripods & Support - Tripods with Heads.
This kit from B&H includes a CC-2481L Carbon Fiber Lateral Tripod and BC-139 Ball Head. The tripod is a sturdy support for any DSLR or point-and-shoot camera. With a load capacity of 25 lb and a maximum height of 70.3", including the head, the lateral tripod features a tilting, swiveling center column that enables flexible positioning for macro photography and other uses.
Engaging the lateral adjustment lever frees the tilting of the center column once it's been extended past the chassis, which becomes possible by pressing the button at the column's bottom to disengage the safety bolt. Once extended, the column can tilt from its original 0°, straight-up-and-down orientation, to a 180° upside-down orientation - with possible stops everywhere in between, including a 90° lateral position. Twisting a knob on the chassis locks and unlocks the 360° swiveling of the center column and its upper collar.
The tripod's flip locks, which enable the extension and securing of the leg stages, are user-adjustable. By using a supplied hex key, the user can tighten each flip lock to safeguard their continued reliable performance.
When it's not being used in its lateral mode, the CC-2481L's rapid center column functions like any professional tripod, extending after a twist of the knob on the upper collar. The tripod's center column can also be removed from both the chassis and the upper collar so that it can be reversed. For protecting your camera when the column is retracted quickly, there's a rubber damper under the center-post collar. Steel locking screws underneath the center-post collar enable you to fasten a camera head more securely.
Push/pull tabs allow you to set the positions of the three legs independently at three different angles. This allows you to shoot from low angles or on uneven terrain. For stability on softer terrain, the CC-2481L features metal spikes that retract and emerge by twisting the foot's rubber portion.
The included BC-139 ball head is a durable aluminum ball head that features an Arca-type compatible quick-release system. It has a large locking knob with a tension control screw to give you maximum control of the ball, and a separate knob for the 360° panning movement.
Its multiple knobs help make taking panoramic photos simple by allowing you to pan a specific number of degrees while keeping the head's tilt position locked. In fact, the BC-139 features degree markings around its circumference to aid in that task. A notch in the ball head allows you to quickly change between portrait and landscape orientation.
The included quick-release plate attaches to your camera via its standard 1/4"-20 screw, and is secured in place with an Arca-type clamp. A locking knob controls the opening and closing of the aluminum clamp simply and reliably. Two safety screws on the bottom of the plate help prevent your camera from accidentally being released when adjusting the plate fore and aft. Multiple bubble levels help ensure that your camera will be level with the horizon.
|
If you own a Oben tripods with heads and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139:
|
The user manual for the Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139 can be downloaded in .pdf
format if it did not come with your new tripods with heads, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Oben users keep a unique electronic library
for Oben tripods with headss,
where you can use our link to download the user manual for the Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139.
The user manual lists all of the functions of the Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139,
all the basic and advanced features and tells you how to use the tripods with heads.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Oben service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139. User manuals are also
available on the Oben website under Photography - Tripods & Support - Tripods with Heads.
Question and answer discussion forum concerning user instructions and resolving problems with the Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Oben CC-2481L Carbon Fiber Lateral Tripod CC-2481L/BC-139
|
|
|
|
|
