User manual Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P
Operating instructions and pdf manual for use - Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P User manual, User manual Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P, Panasonic, AV-HS60U1P, Main, Frame, w/, Single, Power, A
User manual for Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P
Manufacturer: Panasonic
Basic description and contents of package
Product classification: Professional Video - Studio & EFP Equipment - Production Switchers
Safety instructions
Startup and operation of the production switchers
Tips for setting up your Panasonic
Settings and expert assistance
Contact Panasonic service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P,
which address similar problems with connecting and setting up Production Switchers Panasonic.
User manual for the Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P
The user manual for the Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P provides
necessary instructions for the proper use of the product Professional Video - Studio & EFP Equipment - Production Switchers.
The AV-HS60U1P Main Frame w/ Single Power Supply for AV-HS6000 Switcher from Panasonic features the input and output connectors and processing engine that drives the AV-HS6000 2 M/E switcher. It features 32 HD-SDI inputs, along with two DVI-D (digital only) inputs for incorporating content from computer sources. It will support video resolutions up to 1080p at 10-bit, 4:2:2 in YUV color space, and up to 1080p 8-bit, 4:4:4 in RGB color space. Additionally, it will accept VESA computer resolutions up to 1600 x 1200 for 4:3 and 1920 x 1200 for 16:10.
It features 16 output channels, with each output channel mirrored on two SDI outputs. Not only can these outputs be used for an isolated, program, or aux feed, it is also possible to combine up to 16 ISO channels and send to one display using the MultiView function. Additional display arrangements are also possible, including a "squeeze mode" which reduces the image size to fit audio levels and other data around the outside. A total of 4 channels may be used in conjunction with the MultiView function.
The system features two mix and effects (M/E) buses with fades, transitions, and other effects possible. Additionally, the switcher features both upstream and downstream keyers (USK and DSK) for filling in black space, logo and graphic insertion, and compositing. Frequently used effects, setting, video clips, and still images can be save to the internal memory for later recall during a production.
The AV-HS60U1P is designed to be operated using the AV-HS60C1P/AV-HS60C1E or RAV-HS60C2P/AV-HS60C2E control panel. In addition, software plug-ins allow operation over an IP network or using certain Panasonic and third-party RS-422 serial devices. In addition, the AV-HS60C3G Menu Panel is required to access and change settings locally at the switcher.
If you own a Panasonic production switchers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P:
Specifications
SDI Input
Lines: 32 Connectors: 32 x BNC female SDI channels 27, 28, 31, and 32 are equipped with up-converters SDI channels 25 to 32 are equipped with color correctors
Signal Standards HD-SDI SMPTE292M (BTA S-004) standard compliant 0.8 V (p-p) ±10% at 75 ohm Automatic equalizer for runs more than 328' (100 m) -- when 1.5 Gbps/5C-FB cable is used
Signal Standards SD-SDI SMPTE259M standard compliant 0.8 V (p-p) ±10% at 75 ohm Automatic equalizer for runs more that 656' (200 m) -- when 5C-2V cable is used
DVI Input
Lines: 2 Connectors: 2 x DVI-D Supported Resolutions (Computer): XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200) Vertical Frequency (Computer): 60 Hz Supported Video Formats: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p
Note: Cable lengths up to 16.4' (5 m) are supported A DVI-I cables are not supported HDCP is not supported
SDI Output
Lines: 16 -- two distributed outputs per line Connectors: 32 x BNC female Assignments: ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN, DSK4CLN, SEL KEYPVW, MV1 to MV4, and AUX1 to AUX16
Signal Standards HD-SDI SMPTE292M (BTA S-004) standard compliant 0.8 V (p-p) ±10% at 75 ohm
Signal Standards SD-SDI SMPTE259M standard compliant 0.8 V (p-p) ±10% at 75 ohm
Connectors: 2 x BNC female -- input with loop-through
Supports same field frequencies as those of the system formats supported: In Genlock Mode: Black burst or tri-level sync (with loop-through)
Note: If the loop-through output is not used, 75 ohm termination is required In the 1080/24PsF and 1080/23.98PsF formats, only Genlock mode supported In the 1080/23.98PsF format, black burst signals with 10 Field ID (SMPTE318M compliant) or Tri-level Sync signals are supported In the 1080/24PsF format, Tri-level sync signals supported In internal sync mode black burst signal is output through both connectors
LTC Input
Connector: BNC female Impedance: 1 kohm Level: 1 to 2 V (p-p)
Video Delay
1 Line (H): When the frame synchronizer is set to "Off" and the upconverter is set to "OFF" 1 Frame (H): When the frame syncronizer is set to "ON", or the upconverter is set to "ON"
Note: When the signals have passed through PinP, DVE, MultiView, down-converter, or DVI-IN, a maximum delay of 1 frame is applied in each case
Connector: 1 x RJ-45 Compatible with 100Base-TX and AUTO-MDIX -- for IP control Supported Cable: CAT5E or better, up to 328' (100m) -- STP (Shielded Twisted Pair) cable recommended
PANEL Terminal
Connector: RJ-45 Compatible with 100Base-TX and AUTO-MDIX -- for Control Panel (AV-HS60C1/AV-HS60C2) connection Supported Cable: CAT5E or better, up to 328' (100m) -- STP (Shielded Twisted Pair) cable recommended
Serial Interface
Connectors: 4 x D-sub 9-pin female Terminals 1 to 3: For master connection to control external devices Terminal 4: For master/slave connection to control external devices
The user manual for the Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P can be downloaded in .pdf
format if it did not come with your new production switchers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Panasonic users keep a unique electronic library
for Panasonic production switcherss,
where you can use our link to download the user manual for the Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P.
The user manual lists all of the functions of the Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P,
all the basic and advanced features and tells you how to use the production switchers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Panasonic service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P. User manuals are also
available on the Panasonic website under Professional Video - Studio & EFP Equipment - Production Switchers.
Question and answer discussion forum concerning user instructions and resolving problems with the Panasonic AV-HS60U1P Main Frame w/ Single Power AV-HS60U1P - no comments have been made yet - be the first to add a comment
Hi,
I am 75 years old, I live in Beauvais, France. I was during 43 years a S.E. in the french civil service of Equipment and Housing, now retired.
I have been practicing photography for over half a century.
I mostly use Large and Medium Format f...Simmons 6-24x50 - Simmons 6-24x50 Predator Varmint Riflescope 656245 Posted by: Stuart Williams 2024-03-26 12:36:48