User manual Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510
Operating instructions and pdf manual for use - Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510 User manual, User manual Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510, Peavey, IPR2, 7500, DSP, Rackmount, Stereo, Power, Amp, 0300
User manual for Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510
Manufacturer: Peavey
Basic description and contents of package
Product classification: Pro Audio - Live Sound - Power Amplifiers
Safety instructions
Startup and operation of the power amplifiers
Tips for setting up your Peavey
Settings and expert assistance
Contact Peavey service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510,
which address similar problems with connecting and setting up Power Amplifiers Peavey.
User manual for the Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510
The user manual for the Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The IPR2 7500 DSP Rackmount Stereo Power Amp from Peavey is a rack mount stereo amplifier that offers powerful output, presets, and digital customization through a 32-bit processor. Designed to be used in a variety of live sound situations, the loudspeaker setting presets include commonly used applications such as dance, speech, rock, thump, loudness, and contemporary worship, as well as Peavey's SP, PR, Impulse, SSE, QW, and PV Series loudspeaker and monitor emulations.
While providing 2,020 watts at 4 Ω in a lightweight 6.2 lb package, the IPR2 7500's class D topology assures high fidelity and power efficiency. For versatility, the IPR2 7500 has combination XLR and ¼" inputs, ¼" unbalanced pass through and combination ¼" or Speakon outputs. Coupled with its two channel independent fourth order Linkwitz-Riley crossovers which help assure accurate sound reproduction, the IPR2 7500 has high performance capabilities for a variety of settings and applications for live sound.
If you own a Peavey power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510:
Specifications
Power Rating
2x 3,750 w RMS into 2Ω, @ 1 kHz at 1% THD 2x 2,020 w RMS into 4Ω, @ 1 kHz at <0.1% THD 2x 1,250 w RMS into 8Ω, @ 1 kHz at <0.1% THD 1x 3,850 w RMS into 2Ω, @ 1 kHz at <0.1% THD 1x 2,400 w RMS into 4Ω, @ 1 kHz at <0.1% THD 1x 1,330 w RMS into 8Ω, @ 1 kHz at <0.1% THD
Inputs
2x XLR/TRS combo
Outputs
2x Speakon/TS combo
Pass Through
2x 1/4" TS (unbalanced)
Minimum Load Impedance
2Ω
RMS Voltage Swing
124 V
Frequency Response
20 Hz to 35 kHz, 0.0 dB, -3.0 dB @ 1 W
Total Harmonic Distortion
<0.5% @ 3,280 w per channel, 20 Hz to 4 kHz, decreasing to 3,000 w at 20 kHz, 2 x 2Ω <0.1% @ 1,800 w per channel from 20 Hz to 20 kHz, 2 x 4 Ω <0.1% @ 1,200 w per channel from 20 Hz to 10 kHz, 2 x 8 Ω
CMRR
>-75 dB @ 1 kHz
Voltage Gain
40x (+32 dB)
Crossover
100 Hz switchable 2nd order high-pass and 3rd order low-pass per channel
Cross Talk
>-85 dB @ 1 kHz at 1000 W @ 8Ω
Hum & Noise
>-106 dB, "A" weighted referenced to rated power @ 4Ω
Slew Rate
> 12V/μs
Damping Factor
>200:1 @ 20 Hz to 1 kHz @ 8Ω
Phase Response
15 to -85° from 20Hz to 20kHz
Input Sensitivity
2.25 V +/-3% for 1 kHz 4Ω rated power 2.195 volts +/- 3% for 1 kHz 2 ohm rated power
2 x Front panel attenuators, 1 x Crossover select switch for HPF, Normal, LPF
LEDs
2x Clip limiting, 2x Signal presence, 2x Active status, 2x Temp 2x DC protect
Protection
Thermal, DC, subsonic, incorrect loads, under and over voltage
Construction
0.06" thick aluminum frame
Dimensions (W x D x H)
19 x 10.5 x 3.5" (483 x 267 x 89 mm)
Weight
6.2 lb (2.8 kg)
The user manual for the Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510 can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Peavey users keep a unique electronic library
for Peavey power amplifierss,
where you can use our link to download the user manual for the Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510.
The user manual lists all of the functions of the Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Peavey service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510. User manuals are also
available on the Peavey website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Peavey IPR2 7500 DSP Rackmount Stereo Power Amp 03004510 - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17