|
User manual for Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X
- Manufacturer: Pelco
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Matrix Solutions - Matrix Switches
- Safety instructions
- Startup and operation of the matrix switches
- Tips for setting up your Pelco
- Settings and expert assistance
- Contact Pelco service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X,
which address similar problems with connecting and setting up Matrix Switches Pelco.
|
User manual for the Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X
The user manual for the Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Matrix Solutions - Matrix Switches.
The Pelco CM6800E48X8X Matrix Switcher/Controller (PAL) is designed for medium-sized matrix switch applications. This matrix switcher/controller provides switching and control for up to 48 video inputs and 8 monitor outputs from any one of up to 18 keyboards, PCs, and other devices. Furthermore, the CM6800 provides switching and control from any one of up to 10 keyboards. The system can also be used to control other devices, such as Genex multiplexers.
The user-enabled character display shows time and date, operation mode, camera number, and a 20-character title for quick, easy identification of the on-screen video. The CM6800 supports powerful system macros (64) and configurable sequences (32), which allow activation of commonly occurring events based on time/calendar or alarms. Macros provide quick call-up of multiple cameras to multiple monitors.
Macros can also activate preset positions and auxiliaries on suitably equipped (PTZ or dome) receivers, and activate external relays to turn on lights, lock doors, or control other auxiliary functions (additional equipment may be required).
Built-in video loss detection alerts operators or technicians of camera failure. Logical camera numbering provides the ability to assign any camera number to the physical input. An integral color bar generator allows the user to adjust monitor settings.
With the CM6800E, the system manager can select from a wide variety of alarm handling and display options. An alarm can trigger a macro, preset, or pattern, and alarmed cameras can be displayed on one or several monitors. There are also choices for the order in which alarms are displayed, alarm priorities, automatic or manual acknowledgement, and activation of auxiliaries.
Multiple ports are provided for PTZ control and keyboards. A single data line, using Pelco M protocol, can accommodate various types of equipment, such as keyboards and external alarm interface units. RS-232 ports allow for communication with a PC. Peripheral components allow for expansion of alarms, relay contacts, and keyboards.
The CM6800 offers easy-to-use, password-protected, on-screen configuration menus, and supports 8 different languages. The CM6800 is designed to be remotely operated from desktop keyboards or external computer systems. System configuring is easy using on-screen menus and a system keyboard or the Windows based system management software. The manager software allows for remote configuration and external storage of all user setups. Configuration menus and on-screen texts are provided in eight languages: English, French, German, Italian, Polish, Portuguese, Russian, and Spanish. Multiple ports are provided for PTZ control, keyboards, and peripheral components.
|
If you own a Pelco matrix switches and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X:
Memory Protection | Lithium battery provides 5 years of data protection | Keyboard | Total Capacity: 18: 8 KBD100/200A/300A Series keyboards and 2 KBD960 Series keyboards Keyboard Power: powers 2 KBD100/KBD200A/KBD300A series keyboards | Control | Receiver/dome control: coaxitron and RS-422 | Alarm Inputs | 8 individually configurable for N.O. or N.C. on rear panel | Control Output | Relay (SPDT): 2, rated at 0.5 A at 125 VAC, 1 A at 30 VDC, 60 milliohms contact resistance Open Collector (TTL): 1, 15 VDC maximum, 25 mA maximum | Outputs | Additional output: up to 4 REL2064, Relay Interface Units, may be connected to the CM6800E-48X8 | Ports | 10 total: 8 data ports, 2 PTZ control port, 2 data port powered for keyboards | Macros | 64 | Sequences | 32 configurable | Operating Temperature | 20 to 120°F (-7 to 49°C) | Operating Humidity | 10 to 90%, non-condensing | Power Source | 120 VAC or 230 VAC, 50/60 Hz, auto ranging | Power Consumption | 25 W | Video Inputs | 40, BNC, terminating or looping (individually selectable per camera) 0.5 to 2 Vpp composite video, video loss detection | Video Inputs | Alternate video inputs: 8 BNC, terminating 0.5 to 2 Vpp composite video, video loss detection | Video Outputs | 8 outputs, BNC | Switching Type | Cross-point video matrix | Switching Method | Vertical interval switching | Switching Time | Less than 16 milliseconds (typical) | Bandwidth | 15 MHz | Frequency Response | Flat to 8 MHz, ±1 dB to 13 MHz | Signal-to-Noise Ratio | -44.26 dB (peak-to-peak vs RMS noise) | Adjacent Channel Crosstalk | -56.47 dB at 3.58 MHz | Differential Gain | 0.11% | Differential Phase | 0.06° | Tilt | Line tilt: 0.20% Field tilt: 0.56% | Gain | Unity (±1 dB) | DC Output | 0 volts | Cable Distances | RG59/U: 750' (228 m) RG6/U: 1,000' (304 m) RJ11/U: 1,500' (457 m) | Cable Requirements | 75 ohms impedance All-copper center conductor All-copper braided shield with 95% braid coverage | Type | White with black outline, adjustable brightness | Camera Identification | 2 lines, 20-character title, plus camera number, monitor number, date (4 formats) and time (24-hour or AM/PM formats); each item user-selectable | Configuration | On-screen, menu driven | Mounting | Factory configured for EIA rack mount (3 RU), rack ears can be removed for versatile wall mount or freestanding applications | Dimensions (DxWxH) | 12.25 x 17.4 x 5.25" (31.12 x 44.2 x 13.34 cm) | Weight | 11.6 lb (5.22 kg) | |
The user manual for the Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X can be downloaded in .pdf
format if it did not come with your new matrix switches, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco matrix switchess,
where you can use our link to download the user manual for the Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X.
The user manual lists all of the functions of the Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X,
all the basic and advanced features and tells you how to use the matrix switches.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Matrix Solutions - Matrix Switches.
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pelco CM6800E48X8X Matrix Switcher/Controller CM6800E-48X8-X
|
|
|
|
|